An Empirical Tropical Instability Wave-induced Wind Stress Model in the Equatorial Pacific and its Incorporation into the Ocean Model

Abstract

Satellite observations revealed that there is a close relationship between perturbations of sea surface temperature (SST) and wind stress (τ) induced by tropical instability waves (TIWs; SST_TIW and τ _TIW). Using the empirical relationship observed between TIW-induced wind stress divergence (curl) and downwind (crosswind) SST gradients, this study establishes a TIW-induced wind stress field perturbation model τ _TIW?=?F(SST). This empirical model solves τ _TIW from the TIW-induced wind stress divergence and curl, which are estimated from the downwind and crosswind SST gradients. This empirical τ _TIW?=?F(SST) model can be incorporated into the ocean model to take into account the effect of τ _TIW. By comparing two experiments with and without the τ _TIW effect, this study demonstrates that τ _TIW has a substantial effect on the equatorial Pacific heat budget and induces the long-term mean SST to exhibit a 0.2°C difference, which is consistent with previous studies.     

喀什地区1961—2010年最大冻土深度变化

利用1961～2010年喀什地区所属喀什市、莎车县、巴楚县、塔什库尔干县等4个代表性站50a的年最大冻土深度、冬季平均气温、极端最低气温、极端最低地温等资料,采用气候趋势系数和气候倾向率方法,对1961年以来喀什地区最大冻土深度变化进行了分析。结果表明,喀什地区平原多年平均最大冻土深度为48.1 cm,年际最大值与最小值深度差为82cm,随年际变化总体呈明显的减小趋势,其变化倾向率为-3.8cm/10a,年代际变化呈阶梯状逐渐减小,冻土深度减小主要受冬季平均气温升高的影响,气温每升高1℃,冻土深度减小7.75 cm;山区多年平均最大冻土深度为148.8cm,年际最大值与最小值深度差为88cm,随年际变化总体呈明显的减小趋势,其变化倾向率为-2.5cm/10a。     

基于ERSM涡轮盘径向变形的非线性动态概率分析

为了准确设计高压涡轮盘和叶尖间隙,从概率的角度进行了涡轮盘径向变形的分析。介绍了高精度高效率的非线性动态概率分析的极值响应面方法(Extremum Response Surface Method, ERSM),并建立了其数学模型。考虑材料属性和边界条件的非线性,以及热载荷和离心载荷的动态性,基于ERSM对涡轮盘径向变形进行了非线性动态概率分析,得到了输入输出参数的分布特征和影响涡轮盘径向动态变形的主要因素。最后,通过方法比较,验证了ERSM在保证计算精度的前提下能大大提高计算速度,节约计算时间,改善计算效率。为进行更有效的涡轮盘设计和优化,改善叶尖间隙设计和控制的合理性提供了有效依据。      

阶段性干旱胁迫对小麦光合生理特性及产量结构的影响

在人工遮雨的条件下,采用盆栽的种植方式探究"皖麦68"营养生长期(返青期—开花期)及生殖生长期(开花期—成熟期)轻度干旱胁迫(土壤相对含水量为55%±5%)及复水(土壤相对含水量为70%±5%)对其光合生理特性及产量结构的影响。结果表明:返青期至成熟期充分供水(CK)的小麦旗叶光合参数和产量最高。开花至成熟期复水(DN)的小麦叶片在复水后光合能力迅速恢复,表现出了超补偿效应:光合速率(16.43μmol/(m~2·s))甚至超过了CK(15.01μmol/(m~2·s));采用非直角双曲线模型拟合小麦旗叶的光响应曲线,其中DN的曲角θ最大;DN产量较CK略有降低但千粒重为34.51 g,高于CK(34.44 g)。开花至成熟期轻度干旱(ND)及全生育期轻度干旱(DD)的小麦光合特征参数与产量均显著降低。DD产量最低、品质最差,但其收获指数I_H高于CK、仅次于DN。在小麦返青期—开花期进行水分管理适量减少灌溉,开花期—成熟期复水能够提升籽粒的干物质积累量,获得较高的产量及品质。     

Modelling mechanical behaviour of limestone under reservoir conditions

High porosity and low permeability limestone has presented pore collapse. As fluid is withdrawn from these reservoirs, the effective stresses acting on the rock increase. If the strength of the rock is overcome, pore collapse may occur, leading to irreversible compaction of porous media with permeability and porosity reduction. It impacts on fluid withdrawal. Most of reservoirs have been discovered in weak formations, which are susceptible to this phenomenon. This work presents a study on the mechanical behaviour of a porous limestone from a reservoir located in Campos Basin, offshore Brazil. An experimental program was undergone in order to define its elastic plastic behaviour. The tests reproduced the loading path conditions expected in a reservoir under production. Parameters of the cap model were fitted to these tests and numerical simulations were run. The numerical simulations presented a good agreement with the experimental tests. Copyright © 2006 John Wiley & Sons, Ltd.     

Delayed plastic model for time‐dependent behaviour of materials

A delayed plastic model, based on the theory of plasticity, is proposed to represent the time‐dependent behaviour of materials. It is assumed in this model that the stress can lie outside the yield surface and the conjugate stress called static stress is defined on the yield surface. The stress–strain relation is calculated based on the plastic theory embedding the static stress. Thus, the stress–strain relation of the model practically corresponds to that of the inviscid elastoplastic model under fairly low rate deformation. The delayed plastic model is coupled with the Cam‐clay model for normally consolidated clays. The performance of the model is then examined by comparing the model predictions with reported time‐dependent behaviour of clays under undrained triaxial conditions. It is shown that the model is capable of predicting the effect of strain rate during undrained shear and the undrained creep behaviour including creep rupture. Copyright © 2001 John Wiley & Sons, Ltd.     

土层随机地震反应的动力可靠度计算

研究了土层的随机地震反应分析方法 ,建立了基岩输入地震动加速度功率谱函数为白噪声和过滤白噪声时土层的动力可靠度计算理论     

Finite element analysis of land subsidence above depleted reservoirs with pore pressure gradient and total stress formulations

The solution of the poroelastic equations for predicting land subsidence above productive gas/oil fields may be addressed by the principle of virtual works using either the effective intergranular stress, with the pore pressure gradient regarded as a distributed body force, or the total stress incorporating the pore pressure. In the finite element (FE) method both approaches prove equivalent at the global assembled level. However, at the element level apparently the equivalence does not hold, and the strength source related to the pore pressure seems to generate different local forces on the element nodes. The two formulations are briefly reviewed and discussed for triangular and tetrahedral finite elements. They are shown to yield different results at the global level as well in a three‐dimensional axisymmetric porous medium if the FE integration is performed using the average element‐wise radius. A modification to both formulations is suggested which allows to correctly solve the problem of a finite reservoir with an infinite pressure gradient, i.e. with a pore pressure discontinuity on its boundary. Copyright © 2001 John Wiley & Sons, Ltd.     

Comparative Analysis of Seismic Response Characteristics of Pile-Soil-Stnicture Interaction System

The study on the earthquake-resistant performance of a pile-soil-structure interaction system is a relatively complicated and primarily important issue in civil engineering practice. In this paper, a computational model and computation procedures for pile-supported structures, which can duly consider the pile-soil interaction effect, are established by the finite element method. Numerical implementation is made in the time domain. A simplified approximation for the seismic response analysis of pile-soil-structure systems is briefly presented. Then a comparative study is performed for an engineering example with numerical results computed respectively by the finite element method and the simplified method. Through comparative analysis, it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method. The numerical results and findings will offer instructive guidelines for earthquake-resistant analysis and design of pile-supported structures.     

Simulation of the damage to a simple RC structure in the Bhuj,India, earthquake to estimate the level of input‐motion

Analysis of a simple reinforced concrete (RC) structure damaged by the Bhuj, India, earthquake was carried out to estimate the level of shaking in the epicentral region. For this, an attempt was made to estimate the level of input motion to cause inelastic behavior to the extent observed during the field visit. To consider the inelastic effects, both yielding of steel bars as well as crushing of the concrete cover has been investigated employing the hysteretic model known as the Fiber model. The only available record at Ahmedabad of the Bhuj earthquake and four additional earthquake records from Japan and California were used in the analysis. Considering simple scaling of input motion, the level of input motion to cause crushing and spall‐off of the concrete cover as observed in the field was estimated to be of the order of 6 times the original instrumental record obtained at 240 km away from the epicenter. The methodology proposed was promising in providing a useful quantitative indication of the level of shaking when instrumental records are not available. It was also noted that the design response spectrum specified in Indian seismic code IS1893: 1984 appears inadequate compared to the extent of shaking estimated. Copyright © 2005 John Wiley & Sons, Ltd.