基于栅格数据的流域降雨径流模型

本文在研究降雨时空分布不均匀与下垫面自然地理参数空间分布不均匀，对降雨径流过程影响的基础上，提出了一种在地理信息系统支持下的动态分布式降雨径流流域模型，实现了基于栅格的坡面产汇流与河道汇流的数值模拟，能够获得流域上任意模拟时刻任意栅格的径流量。模型视栅格为水文一致性单元，水文参数在栅格内一致，在相邻栅格间变化，采用Ｈｏｌｔａｎ模型计算下渗率，水量平衡方程和线性水库的马斯京根法进行栅格产汇流演算，模     

SPOT图象的解析立体测图

本文讨论了适合于SPOT图象的用光束法平差解算外方位元素的数学模型;介绍了在国产解析测图仪APS—1上进行SOPT图象立体测图的方法;研究了SPOT投影方式的实时循环程序LOOP及SPOT图象的测图软件包。     

Petrology of spinel granulites from Araku, Eastern Ghats, India, and a petrogenetic grid for sapphirine-free rocks in the system FMAS

Abstract Spinel-quartz-cordierite and spinel-quartz are found as relic prograde assemblages in Fe-rich granulites from the Araku area, Eastern Ghats belt, India. Subsequent reactions produced orthopyroxene + sillimanite in the former association and garnet + sillimanite in the latter. The first reaction is univariant in the FMAS system, but is trivariant in the present case because of the presence of Zn and Fe³⁺ in spinel. The second reaction also has high variance because of Zn and Fe³⁺, but also because of the presence of Ca in garnet. Thermobarometry shows that the metamorphic conditions were approximately 950° C and 8.5 kbar and the fo ₂ was near the NNO buffer. In Fe-rich bulk compositions and low- P -high- T conditions of metamorphism, two of the univariant reactions around the invariant point [Sa], namely (Sa, Hy) and (Sa, Cd), change topology due to reverse partitioning of Fe-Mg between coexisting garnet and spinel. An alternative partial petrogenetic grid in the system FMAS is constructed for such conditions and is applied satisfactorily to several sapphirine-free spinel granulites. It is shown that bulk composition ( X _Fe and Zn) exerts greater control on the stability of spinel + quartz than fo ₂. The effect of the presence of Zn and Fe³⁺ in spinel on the proposed grid is evaluated. Reaction textures in the Araku spinel granulites can be explained from the petrogenetic grid as due to near-isobaric cooling.     

栅格图形数据叠置分析方法及其在城镇规划中应用

本文介绍用栅格数据进行图形叠置分析的方法,提出矢量数据转换为栅格数据的链拓扑法、减少栅格数据存储量的编码方法、根据模糊综合评判原理建立多因素综合评价数学模型以及叠置评价结果的类型格网合并的边界跟踪算法,最后给出一个实例说明栅格图形数据叠置分析方法在城镇规划中的应用。     

Three dimensional velocity structure beneath the Kunming Telemetered Seismic Network

Ｔｈｒｅｅ　ｄｉｍｅｎｓｉｏｎａｌ　ｖｅｌｏｃｉｔｙ　ｓｔｒｕｃｔｕｒｅ　ｂｅｎｅａｔｈ　ｔｈｅ　Ｋｕｎｍｉｎｇ　Ｔｅｌｅｍｅｔｅｒｅｄ　Ｓｅｉｓｍｉｃ　Ｎｅｔｗｏｒｋ（王椿镛）（王溪莉）（颜其中）Ｔｈｒｅｅｄｉｍｅｎｓｉｏｎａｌｖｅｌｏｃｉｔｙｓｔ...     

Grid dispersion in generating finite-differences synthetic seismograms

Ｇｒｉｄｄｉｓｐｅｒｓｉｏｎｉｎｇｅｎｅｒａｔｉｎｇｆｉｎｉｔｅ－ｄｉｆｆｅｒｅｎｃｅｓｓｙｎｔｈｅｔｉｃｓｅｉｓｍｏｇｒａｍｓＡｂｄｏｌｒａｈｉｍＪａｖａｈｅｒｉａｎ（ＩｎｓｔｉｔｕｔｅｏｆＧｅｏｐｈｙｓｉｃｓ，ｔｈｅＵｎｉｖｅｒｓｉｔｙｏｆＴｅｈ...     

图像获取条件对SPOT景像的影响

图像获取条件对ＳＰＯＴ景像的构成有极大影响，也直接影响对ＳＰＯＴ图像的处理方法。ＳＰＯＴ图像的辅助数据在解析或数字处理中有重要应用。本文对ＳＰＯＴ卫星与视点间的地心角、节距角ω卫星与视点的纬度差异、景像方位角Ｔ、景像尺寸和ＳＰＯＴ图像格网参考系统ＧＲＳ中（Ｋ，Ｊ）与（λ， Ｂ）换算公式进行了推证和分析，并以ＳＰＯＴ辅助数据验证了（Ｋ，Ｊ）与（λ，Ｂ）换算的精度。     

An equal area conversion model for rasterization of vector polygons

Vector-raster conversion is one of the classic research topics in the field of Geographical Information Systems (GIS). The algorithms commonly used in GIS are devoted to maintaining the vector polygons' shape characteristics, but neglect the gain and loss of a polygon's area, which is another important attribute. This paper proposes an equal-area conversion model based on an area compensation optimization principle. According to the topological relationship among polygons and boundary grids, a neighborhood compensation principle was adopted to assign the attributes of boundary grids and a global optimization algorithm was developed to minimize area distortion in the whole data set. Two experiments were designed and the results indicated that this algorithm not only guaranteed the area error is as small as possible, but also has the advantage as being adaptive to polygon shape and spatial structure.     

Scalar advection schemes for ocean modelling on unstructured triangular grids

Several schemes for scalar advection on unstructured triangular grids are assessed for possible use in ocean modelling applications. Finite element, finite volume and finite volume–element approaches are evaluated. A series of tests, including a numerical order of convergence analysis, idealized rotating cone and cylinder experiments, and transport of a tracer through the Stommel Gyre representation of ocean basin-scale circulation, are carried out. Volume element Eulerian–Lagrangian and third-order Runge-Kutta discontinuous Galerkin schemes are recommended for use in tracer studies. Taylor–Galerkin and second-order Runge–Kutta discontinuous Galerkin are found to be robust and accurate second-order schemes. When positivity is required, a fluctuation redistribution scheme was found to be an easily implemented, accurate, and computationally efficient approach. Responsible editor: Phil Dyke     

The effect of interpolation methods in surface definition: an experimental study

Mappings of the earth surface and their representation in 3D (three‐dimensional) models are commonly used in most recent research. Modeling research, which starts with classical surveying methods, acquires new dimensions matching the modern technologies. 3D models of any object or earth surface can be used in much visual and scientific research. A digital model of the landscape is an important part within creation of geo‐information systems used in the public administration and in the commercial sphere. It is an important tool in applications such as geomorphology, hydrology, geology, cartography, ecology, mining etc. Values of volume in terrains that do not have regular geometric structure can be obtained more accurately by using 3D models of surfaces with respect to developing technology. Basic data of 3D models must indicate 3D coordinates of the surveyed object in the reference frame. Distribution and intensity of points are important factors in modeling earth surfaces. A minimum number of points is desired in defining an object in 3D. Interpolation methods employing different mathematical models are used to obtain 3D models of terrain surfaces. In this study, the effect of interpolation methods in defining a terrain surface is investigated. For this purpose, a uniform surface, hill‐shaped artificial object with a known volume is employed. The 3D surface and volume are calculated by using 12 different interpolation methods. Point distribution, point intensity and accuracy of point measurements are not considered. The same data set was used for all the interpolation methods. The interpolation methods are compared and evaluated based on the results. Copyright © 2007 John Wiley & Sons, Ltd.