Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.     

Comparative Study of Hydrogen and Carbon Isotopic Composition of Gases Generated from the Pyrolysis of a Peat under Saltwater and Freshwater Conditions

To understand the influence of the diagenetic water medium on the isotopic compositions of thermogenic coalbed gas, both hydrous and anhydrous closed-system pyrolyses were performed at temperatures of 250°C to 650°C on an herbaceous marsh peat. Compared to the results of anhydrous pyrolysis, the hydrocarbon gases generated from hydrous pyrolyses have very different hydrogen isotopic compositions. However, the carbon isotopic compositions of the hydrocarbon gases became only slightly heavier in hydrous pyrolysis, compared to that from anhydrous pyrolysis. With the progress of thermal evolution from peat to a more advanced thermal maturity of vitrinite reflectance values (Ro) of 5.5% during the pyrolysis, the difference in the average δD value increased from 52‰ to 64‰ between the hydrous pyrolysis with saltwater and anhydrous pyrolysis and increased from 18‰ to 29‰ between the hydrous pyrolysis with freshwater and anhydrous pyrolysis, respectively. The difference in the average δ13C value was only 1‰–2‰ between the hydrous and anhydrous pyrolysis. The relationships between the δD values of the generated hydrocarbon gases and Ro values as well as among δD values of the hydrocarbon gas species are established. The close relationships among these parameters suggest that the water medium had a significant effect on the hydrogen isotopic composition and a minimal effect on the carbon isotopic composition of the hydrocarbon gases. The results of these pyrolyses may provide information for the understanding of the genesis of coalbed gas from herbaceous marsh material with the participation of different diagenetic water media.     

油气基础地质调查井新柯地1井工程设计

以新柯地1井钻井工程设计为例,简述了工程设计的一般要求和原则,对新柯地1井工程设计的难点、钻井结构设计、钻机选型和设备要求、钻具组合和钻进参数、钻井液、固井、井控设计、录井、测井以及钻井工程施工情况进行了介绍。     

基于稳态碎岩方式的PDC钻头设计分析研究

自从20世纪80年代PDC复合片研发成功以来,PDC钻头由于其钻进性能强和耐磨性能好,在世界许多国家的石油钻井和地质勘探中得到了广泛应用,取得了很好的效果。但是,如何进一步提高其在钻探工程中的技术经济指标是一个很迫切的问题。俄罗斯博士Скоромных В. В.教授等对此进行多年研究,提出了稳态破碎岩石方式的思想,即在轴载和扭矩切力形成的合力R与切削面成垂直角度条件下,切入深度h不变时形成的一种碎岩方式。并在此基础上提出了一些设计PDC钻头方面的建议。     

考虑方位漂移的水平井井眼轨道设计

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。     

蒙脱石伊利石化的水热实验模拟

以蒙脱石为初始材料,通过水热实验模拟在不同温度压力条件下蒙脱石的伊利石化过程。利用X射线粉末衍射及X射线荧光光谱、红外光谱和扫描电镜等方法对样品的矿物物相、化学成分、晶体结构与微观形貌等进行分析,其结果表明:(1)蒙脱石至伊利石的转化受温度和压力条件的控制;(2)随着温度和压力的增高,蒙脱石伊利石化沿着蒙脱石-无序伊蒙混层-有序伊蒙混层-伊利石的转化序列进行转化;(3)水热实验模拟表明蒙脱石至伊利石的转化以溶解重结晶机制为主。实验结果不仅有助于了解埋藏与低级变质作用中的蒙脱石伊利石化过程,同时为研究断层活动所致断层泥中黏土矿物的转化及反演断层形成时温度压力条件提供基本参数。     

基于改进K-SVD字典学习方法的地震数据去噪

为实现更好的地震数据去噪技术,笔者引入一种新的算法:快速迭代收缩阀值法(FISTA),通过FISTA和K-奇异值分解(K-SVD)不断迭代更新K-SVD字典,利用更新得到的K-SVD字典对地震数据进行稀疏表示,去除稀疏系数中较小的数值,使数据中的随机噪声得到压制。对层状模型合成地震记录,Marmousi模型合成地震记录以及实际地震数据进行对比实验,得出FISTA算法较OMP算法能更好地提高地震数据的信噪比,同时有效地保护了反射信号。     

某水电站某泥石流沟综合治理概述

某水电站某泥石流沟内常年流水,属季节性排洪沟谷,水动力类型为暴雨,沟内松散物源丰富,具有泥石流发生条件。在上游区以拦挡泥石流为主,通过修建拦挡措施,减少形成泥石流的固体物质,在下游区以防水、边坡防护及引流等措施,通过修建溢流坝截断上游水流对沟内堆渣体渗流影响;通过修建排洪渠及排洪洞引流;通过削坡、修坡进行边坡维护加固。确保了导流洞出口及上下行交通洞进出口的施工期安全及运行安全。     

土壤入渗对阜新市北部浅层地下水总硬度影响的淋滤实验

本次室内土柱淋滤实验通过改变Na~+、H~+、NH_4~+浓度来模拟现实生活中不同浓度的生活污水、酸雨及农业施肥灌溉对浅层地下水总硬度的影响过程。实验结果表明淋滤液浓度越高,所对应的淋出液的总硬度峰值就越高。相同浓度的Na~+、H~+、NH_4~+进行土柱淋滤实验时,NH_4~+所对应的淋出液总硬度的峰值最大,H~+次之,Na~+最小且NH_4~+所对应的整个实验用时最短,在相同浓度单一离子作用下NH_4~+对浅层地下水硬度的影响更加明显。     

Design principles for origin-destination flow maps

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.