Gravity torques for surface waves

The effects of the gravity torques acting on the angular momentum of surface gravity waves are calculated theoretically. For short crested waves the gravity torque is caused by the force of gravity on the orbiting fluid particles acting down the slopes of the crests and troughs and in the direction parallel to the crests and troughs. The gravity torque tries to rotate the angular momentum vectors, and thus the waves themselves, counterclockwise in the horizontal plane, as viewed from above, in both hemispheres. The amount of rotation per unit time is computed to be significant assuming reasonable values for the along-crest and trough slopes for waves in a storm area. The gravity torque has a frequency which is double the frequency of the waves. For long crested waves the gravity torque acts in the vertical plane of the orbit and tries to decelerate the particles when they rise and accelerate them when they fall. By disrupting the horizontal cyclostrophic balance of forces on the fluid particles (centrifugal force versus pressure force) the gravity torque accounts qualitatively for the three characteristics of breaking waves: that they break at the surface, that they break at the crest, and that the crest breaks in the direction of wave propagation.     

The Mathematical and Parameterized Expressions for Wave Induced Excess Flow of Momentum

Wave induced excess flow of momentum(WIEFM)is the averaged flow of momentum over a wave period due to wave presence,which may also be called 3-D radiation stress.In this paper,the 3-D current equations with WIEFM are derived from the averaged Navier-Stokes equations over a wave period,in which the velocity is separated into the large-scale background velocity,the wave particle velocity and the turbulent fluctuation velocity.A concept of wave fluctuating layer(WFL)is put forward,which is the vertical column from the wave trough to wave ridge.The mathematical expressions of WIEFM in WFL and below WFL are given separately.The parameterized expressions of WIEFM are set up according to the linear wave theory.The integration of WIEFM in the vertical direction equals the traditional radiation stress(namely 2-D radiation stress)given by Longuet-Higgins and Stewart.     

Ekman螺线的动力学结构

介绍了Ekman螺线的动力学结构 ,分析研究了风应力及海水内部的动量传递形式 .结果表明 :动量传递方向与海流方向成 45°左偏 .这对于研究海洋内部的动力结构是有意义的 .     

Prediction of UT1–UTC,LOD and AAM χ<Subscript>3</Subscript> by combination of least-squares and multivariate stochastic methods

This article presents the application of a multivariate prediction technique for predicting universal time (UT1–UTC), length of day (LOD) and the axial component of atmospheric angular momentum (AAM χ ₃). The multivariate predictions of LOD and UT1–UTC are generated by means of the combination of (1) least-squares (LS) extrapolation of models for annual, semiannual, 18.6-year, 9.3-year oscillations and for the linear trend, and (2) multivariate autoregressive (MAR) stochastic prediction of LS residuals (LS + MAR). The MAR technique enables the use of the AAM χ ₃ time-series as the explanatory variable for the computation of LOD or UT1–UTC predictions. In order to evaluate the performance of this approach, two other prediction schemes are also applied: (1) LS extrapolation, (2) combination of LS extrapolation and univariate autoregressive (AR) prediction of LS residuals (LS + AR). The multivariate predictions of AAM χ ₃ data, however, are computed as a combination of the extrapolation of the LS model for annual and semiannual oscillations and the LS + MAR. The AAM χ ₃ predictions are also compared with LS extrapolation and LS + AR prediction. It is shown that the predictions of LOD and UT1–UTC based on LS + MAR taking into account the axial component of AAM are more accurate than the predictions of LOD and UT1–UTC based on LS extrapolation or on LS + AR. In particular, the UT1–UTC predictions based on LS + MAR during El Niño/La Niña events exhibit considerably smaller prediction errors than those calculated by means of LS or LS + AR. The AAM χ ₃ time-series is predicted using LS + MAR with higher accuracy than applying LS extrapolation itself in the case of medium-term predictions (up to 100 days in the future). However, the predictions of AAM χ ₃ reveal the best accuracy for LS + AR.     

改进的边缘角度直方图在遥感图像检索中的应用

针对基于形状的遥感图像检索中区域分割困难这个问题,本文提出利用边缘角度直方图作为形状特征对遥感图像进行检索;针对遥感影像分辨率和颜色反差对检索性能的影响,本文提出采用多尺度分析的思想,提取图像在多个尺度上的边缘角度直方图特征进行检索。通过单一尺度边缘角度直方图特征和多尺度边缘角度直方图特征检索的对比实验,揭示了本文所提出的改进方案使遥感图像的检索精度提高了约31个百分点。     

Periodicities in natural remanent magnetization and palaeoclimatic records detected by walsh spectra

The time series consisting of nonsinusoidal Natural Remanent Magnetization (NRM) and palaeoclimatic variations for the past two million years have been spectrally examined by using a new Walsh transform technique. The results show statistically significant periodicities (at 95% confidence level) of approximately 92,000 years; 43,000 years and 21,000 years in the ensemble spectra of the NRM intensity (mineralogic) variations. These NRM periodicities are remarkably close to the well-known Milankovitch cycles. The ensemble spectra of palaeoclimatic records reveal only 41,000 years statistically significant (95%) periodicity corresponding to the obliquity cycle. The study suggests that NRM variations in deep sea sediments probably are more sensitive recorders of palaeoclimatic memory than the oxygen isotope variations.     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

关于角平分线法建立线状缓冲区算法的改进

分析了用对角平分线法建立缓冲区的算法,提出了一种新的求角平分线和缓冲点的方法,实践证明其在算法实现方面是可行的,而且效果比较理想。     

Ekman动量近似下中间边界层模式中的风场结构

发展了一个准三维的、中等复杂的边界层动力学模式，该模式包含了EKman动量近似下的惯性加速度和Blackadar的非线性湍流粘性系数，它进一步改进了Tan和Wu(1993）提出的边界层理论模型。该模型在数值计算复杂性上与经典Ekman模式相类似，但由于包含了Ekman动量近似下的惯性项，使得该模式比传统Ekman模式更近于实际过程。中详细地比较了该模式与其他简化边界层模式在动力学上的差异，结果表明：在经典的Ekman模式中，由于忽略了流动的惯性项作用，导致在气旋性切变气流（反气旋性切变气流）中风速和边界层顶部的垂直速度的高估（低估），而在半地转边界层模式中，由于高估了流动惯性项的作用，结果与经典Ekman模式相反。同样，该模式可以应用于斜压边界层，对于Ekman动量下的斜压边界层风场同时具有经典斜压边界层和Ekman动量近似边界层的特征。     

旋转流地转适应过程与能量转换规律

利用一维线性浅水模式从一个比较普遍的角度对地转适应过程中能量转换的特点进行分析。中首先考虑了两类不同的初始不平衡流的适应问题。一个是Gill所采用的质量不平衡模型，即初始场是静止的，只有水面扰动；另一个是Rossby中所考虑的动量不平衡模型，其初始不平衡流中只有风场的扰动，对这两个模型的适应过程而言，一个显的 特点就是能量转换率始终不会大于1／2或小于0，即适应过程中有位（动）能的释放和向动（位）能的转换，但释放出的能量最多只有其中的一半可以保留在最后的平衡场中。另外，本对任意初始不平衡流适应过程中的能量学特征也进行了分析，指出对于偏差场（相对于一定基本态）的动能和位能而言，上述能量转换关系依然成立。