冬小麦夏玉米土壤水分预报及优化灌溉模型

利用土壤水分平衡方程，结合河南省冬小麦和夏玉米的生长规律和1994～2000年冬小麦、夏玉米田实测土壤湿度资料，建立了河南省冬小麦、夏玉米土壤水分预报及优化灌溉的计算机模型。用1998～1999年郑州市麦田实测土壤湿度资料验证该模型模拟结果，未来10、20、30天土壤湿度相对误差分别为-7．3％～7．7％、-8．3％～6．8％、-7．6％～7．7％，表明利用该模型，可以较为准确地预报未来1个月的土壤水分变化，并可根据小麦、玉米不同发育期特点，给出以最高产量和最佳经济效益为目标的灌溉建议。     

基于小波统计特性的遥感图像像素与特征联合最优融合方法

遥感影像的IHS融合方法由于匹配误差导致光谱畸变和退化,而小波变换在变换域具有良好的分频特性,小波系数的统计特性反映了遥感影像的边缘、线和区域等显著特征。提出了基于小波统计特性的遥感影像的像素和特征联合最优融合方法,在IHS空间,对强度分量I的高频部分利用多分辨率小波融合方法进行影像的高频细节特征融合,低频部分选取光谱信息和空间分辨率评价指标作为融合权系数求优指标,进行像素级最优融合,实验结果证明了该方法的有效性。     

大气热力学的若干新发展

对自20世纪80年代以来的大气热力学发展进行了综合评述, 阐述了如城市热岛效应、全球增暖等非传统大气热力学问题; 基于大气非平衡态热力学的非线性理论, 提出应发展突显热力学作用的数值模式, 并阐述其必要性和可能性。     

IAP/LASG全球海-陆-气耦合系统模式的纬向平均大气气候态分析(英文)

分海洋和陆地两种情况来讨论IAP/LASG全球海-陆-气耦合系统模式（GOAL）四个版本的结果,并与观测资料进行对比分析。一些重要的大气变量包括表面空气温度,海平面气压和降水率用来评估GOALS模式模拟当代气候和气候变率的能力。总的来说,GOALS模式的四个版本都能够合理地再现观测到的平均气候态和季节变化的主要特征。同时评估也揭示了模式的一些缺陷。可以清楚地看到模拟的全球平均海平面气压的主要误差是在陆地上。陆地上表面空气温度模拟偏高主要是由于陆面过程的影响。值得注意的是降水率模拟偏低主要是在海洋上,而中高纬的陆地降水在北半球冬天却比观测偏高。 通过模式不同版本之间的相互比较研究,可以发现模式中太阳辐射日变化物理过程的引入明显地改善了表面空气温度的模拟,尤其是在中低纬度的陆地上。太阳辐射日变化的引入对热带陆地的降水和中高纬度的冬季降水也有较大改进。而且,由于使用了逐日通量距平交换方案（DFA）,GOALS模式新版本模拟的海洋上的温度变率在中低纬度有了改善。 比较观测和模拟的年平均表面空气温度的标准差,可以发现GOALS模式四个版本都低估了海洋和陆地上的温度变率,文中还对影响观测和模拟温度变率差异的可能原因进行了探讨。     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

H2O-CH4-H2-CO2-CO-O2在高温、高压和高密度条件下的状态方程

为了计算高温，高压和高密度流体的热力学性质，提出了一个具有19个参数的维里型状态方程，其中参数与温度间的函数关系采用由Sutherland位能函数导出的维里系数近似式。除临界点附近以外，在已报道的pVT数据所覆盖的大部分超临界区域内，该方程均可适用。用该方程对H2O，CH4，H2，CO2，CO和O2等流体pVT关系的计算结果令人满意，其中pVT上限分别为：91-610GPa,1.6-11.0cm^3/mol,4000-5000K。计算体积的平均偏 小于0．8％，最大偏差小于5．4％。     

洛带气田蓬莱镇气藏开发部署优化研究

气藏评价尚未结束之前，开发的早期部署工作非常困难。针对洛带气田蓬莱镇组气藏的开发部署工作，利用目前许多新方法对开发层系划分、采气规模、开发规划、合理配产和井网部署等进行了优化研究，对气藏开发提出了指导性意见，且对类似气藏也具有参考意义。     

2-D viscoelastic FEM simulation on stress state in the deep part of a subducted slab

Introduction It is found that there are some relationships between the thermal structures of subduction zones and the deep seismicity, while the mechanism relates the thermal structure and the deep seismicity is still unsure (Helffrich, Brodholt, 1991; Furukawa, 1994; Kirby, et al, 1996). From 1980s, geoscientists have constituted a series of numerical simulations on the stress states of subduction slabs. Based on the kinetic computation of Sung and Burns (1976a, b), Goto, et al (1983, 1987…