邢台7.2级地震的发震背景特征

主要从太阳黑子活动、地震迁移、地震韵律和月相等各方面,对邢台地震的发震背景进行了分析。结果显示,这些背景特征是很突出的。认为地震的发生,可能受到多种因素的影响和制约,研究发震背景特征对于我们认识地震和预测未来地震都是有一定意义的。     

河北中关矽卡岩铁矿床钴元素分布规律与沉淀机制研究及意义

河北中关铁矿是“邯邢式”矽卡岩铁矿的代表矿床,本文将中关铁矿床成矿过程划分为5个阶段：干矽卡岩阶段、湿矽卡岩阶段、氧化物阶段、铁铜硫化物阶段和铅锌硫化物阶段。对湿矽卡岩阶段、氧化物阶段和铁铜硫化物阶段的金属矿物（包括黄铁矿、磁铁矿、赤铁矿等）开展电子探针测试,并且对这三个成矿阶段的代表性磁铁矿进行LA-ICP-MS微量元素测试,旨在查明中关铁矿床中Co的赋存状态以及在矿床不同成矿阶段的分布规律,探讨Co元素迁移演化-沉淀机制。研究结果表明,Co主要以类质同象的形式存在于黄铁矿中。不同成矿阶段的Co元素分布不均匀,氧化物阶段黄铁矿和磁铁矿中的Co含量最高,分别为0.12%~1.39%、41×10-6~76×10-6;铁铜硫化物阶段黄铁矿大量出现,且Co含量相对较高,为BDL~0.45%,同时期条带状磁铁矿为32×10-6~71×10-6,故此阶段为Co元素最主要的富集阶段。湿矽卡岩阶段为较高温、弱氧化条件,氧化物阶段温度逐渐降低,氧逸度增加,Co可能主要以CoCl42?形式络合迁移;铁铜硫化物阶段温度进一步降低,但还原性增加,Co可能主要以CoCl42?和Co(HS)+形式络合迁移。温度降低以及氧化还原条件的变化可能是控制Co沉淀的重要因素。     

塔里木北部周缘前陆盆地早二叠世快速迁移与沉积相突变:俯冲板片拆沉的响应

塔里木北部周缘前陆盆地发育于泥盆纪末至早三叠世期间,完整地记录了南天山造山带的发育过程。该盆地在早二叠世由复理石盆地转化为磨拉石盆地,同时发生快速南移。同期幔源物质加入,有山根地壳熔融的岩浆活动、南天山造山带的整体隆升、热液成矿作用集中发育和变形、变质作用的激化使俯冲岩片的拆沉成为盆地转化与迁移的最佳机制。相同的转化过程及深部机制在其他造山带中也明显存在,表明俯冲岩片拆沉是造山作用一个不可或缺的环节。     

烃源岩地质色层效应的模拟实验

利用未混油或混油源岩样品在低温、加压条件下分别对纹层状泥岩、暗色块状泥岩及灰质块状泥岩样品进行排烃模拟实验,其中块状泥岩及灰质块状泥岩被研碎后混入同层原油,而纹层状泥岩不被研碎(也未混油),以保持其层理结构的完整性。实验结果显示,排烃过程造成轻烃相对富集,色谱图中主峰碳前移,正构烷烃分布及部分甾、萜烷参数值在排烃过程中产生明显变化,萜烷对运移的敏感性没有甾烷强。在排烃过程中纹层状泥岩与块状泥岩及灰质块状泥岩的地质色层效应有着显著的差异,相对而言,块状泥岩与块状灰质泥岩的排烃效率低,但排烃过程造成了它们出现较为明显的地质色层效应,而纹层状泥岩排烃效率高,但在排烃过程中地质色层效应不明显。分析认为源岩的物理结构是造成这种地质色层效应的差异的主要原因之一。     

基于走时的保幅偏移方法

振幅随偏移距变化是描述储层特征的重要方法之一,保幅偏移方法就是使偏移剖面能够反映出振幅随偏移距的变化.本论文中的保幅偏移是以走时为基础,主要的方法是采用走时的双曲线展开法,通过走时的二阶空间导数来确定波前曲率.该方法通过建立在大网格上的走时表来确定插值系数,将大网格插值成为较为精细的网格,这样就节省了数据的存储空间.对于相同的网格密度,通过插值来计算走时表比采用程函方程有限差分法直接计算走时要节省5至6倍的时间.走时的插值系数还可以用来计算几何扩散因子、权函数,不仅提高了成像质量,还大大节省了计算时间.     

二维复杂介质中地震波走时和射线的计算方法及其应用

将Podvin和Lecomte的精确局部格点走时计算方法和Schneider等人的动态规划方法结合起来,可得到一种快速、有效的有限差分波前计算方法。使用该方法对各种类型地震波的走时和射线的计算进行了讨论,并给出了这种有限差分走时计算在叠前深度偏移中的应用实例。     

红河断裂活动对琼东南盆地环崖南凹陷构造-沉积-成藏的影响

琼东南盆地西部环崖南凹陷的油气勘探亟需寻找接替领域.针对勘探研究中存在的3个地质问题,利用丰富的钻井和地震资料对红河断裂活动特征及其对环崖南凹陷构造-沉积-成藏的影响开展深入分析.认为红河断裂的走滑活动通过F1断层向琼东南盆地西部传递剪切应力,其演化与环崖南凹陷的构造-沉积作用具有良好的时空耦合关系,并控制了环崖南凹陷...     

Spatiotemporal analysis of COVID-19 risk in Guangdong Province based on population migration

Journal of Geographical Sciences - Population migration, especially population inflow from epidemic areas, is a key source of the risk related to the coronavirus disease 2019 (COVID-19) epidemic....     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

莱州湾表层沉积物粒度和黏土矿物分布特征与运移趋势分析

运用粒度参数分析、黏土矿物含量分析、Flemming三角图示法和Gao-Collins二维的"粒度趋势分析"等方法,对采自莱州湾海域的表层沉积物样品和黏土矿物样品进行分析,了解了该研究区域的沉积环境及沉积物的运移趋势。研究区由岸向海沉积物类型大致依次为砂-粉砂质砂-砂质粉砂-粉砂-黏土质粉砂,并且研究区表层沉积物在近岸区域呈现较为明显的平行岸线的条带状特征;同时沉积物的平均粒径、分选系数、偏态、峰态等粒度参数也呈现出良好的正相关性或负相关性;研究区黏土矿物为伊利石、蒙脱石、绿泥石、高岭石,除伊利石分布大致为黄河三角洲近岸低,向研究区东北方向逐渐升高外,其余的黏土矿物都表现出了近岸高,远海低的分布特征,且主要物源为黄河物质输入。Flemming三角图研究区所有采样点大部分分布在Ⅱ区,少部分分布在Ⅲ区,说明研究区整体水动力较强;采样点在A—E区均有分布,但在C、D两区分布最多,说明研究区沉积物粒径较集中。研究区表层沉积物整体呈由岸向海输运的趋势,具体来看,黄河沉积物入海后向北、向东、向南运移,研究区内沉积物的来源是黄河输沙以及周围入海的小河流的输沙和沿岸冲刷的物质。