Cross-formational hydrocarbon fluid flows in the Tertiary deltaic system of the Beaufort–Mackenzie Basin

Molecular and isotopic compositions of crude oils in the Beaufort–Mackenzie Basin confirm three genetic end-member oil groups and suggest extensive cross-formational hydrocarbon fluid flows in the Tertiary deltaic system. Inter- and intra-fractional variations in the geochemistry of the Tertiary-reservoired oils indicate that the oil source/maturity signatures were substantially masked by biomarkers that were picked up along migration pathways. Thus, many of the previously recognized “immature non-marine oils” are in fact thermally mature, probably derived from unpenetrated deeper marine source rocks. Although the effective source rock volumes have not been evaluated and their exact stratigraphic levels remain unknown, the relative timing of oil generation versus trap formation, rather than poor source quality, may be the cause of under-filled traps in the offshore area.     

Mitigation of municipal solid waste leachate contamination at Payatas, Metro Manila, Philippines： A technical proposal

The gross environmental condition of the Payatas Disposal Facility in Metro Manila, Philippines, implores the need for sustainable technologies to control and abate toxic municipal solid waste leachate and protect public health. A team of environmental engineers recognized this need by selecting the site as a design project for the Mondialogo Worldwide Engineering Award, sponsored by the United Nations and Daimler Chrysler. The project culminated in a technical proposal that highlighted the following design features： an impermeable dumpsite cap to control leachate generation; vertical impermeable barriers for containment and isolation of leachate; a drainage system to divert clean, surface water from the cap and prevent its contamination prior to discharge; a leachate recirculation system to enhance stabilisation of the waste deposit; and a facultative lagoon and constructed wetland system to treat excess leachate.     

Engineering geological studies and tunnel support design at Sulakyurt dam site, Turkey

This paper presents the results of engineering geological investigations and tunnel support design studies, carried out at the Sulakyurt dam site, northeast of Ankara, Turkey. The Sulakyurt dam will be used for flow control and water storage for irrigation projects. Studies were carried out both in the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, core drilling and sampling for laboratory testing. The diversion tunnel will be driven in rock mass, consisting of granite and diorite. Empirical, analytical and numerical methods were combined for safe tunnel design. Rock mass rating (RMR), Rock mass quality (Q) and Geological strength index (GSI) systems were used for empirical rock mass quality determination, site characterization and support design. The convergence–confinement method was used as analytical method and software called Phase², a 2D finite element program, was utilized as numerical method. According to the results acquired from the empirical, analytical and numerical methods, tunnel stability problems were expected in both granite and diorite rock masses. The support system, suggested by empirical methods, was applied and the performance of suggested support system was evaluated by means of numerical modelling. It was concluded that the suggested support systems were adequate, since after applying the suggested support system to granite and diorite, tunnel deformation and the yielded elements around the tunnel decreased significantly. Thus, it is suggested that for more reliable support design empirical, numerical and analytical methods should be combined.     

Cretaceous isochron ages from K–Ar and Ar / Ar dating of eclogitic rocks in the Tso Morari Complex, western Himalaya, India

The Tso Morari Complex, which is thought to be originally the margin of the Indian continent, is composed of pelitic gneisses and schists including mafic rock lenses (eclogites and basic schists). Eclogites studied here have the mineral assemblage Grt + Omp + Ca-Amp + Zo + Phn + Pg + Qtz + Rt. They also have coesite pseudomorph in garnet and quartz rods in omphacite, suggesting a record of ultrahigh-pressure metamorphism. They occur only in the cores of meter-scale mafic rock lenses intercalated with the pelitic schists. Small mafic lenses and the rim parts of large lenses have been strongly deformed to form the foliation parallel to that of the pelitic schists and show the mineral assemblages of upper greenschist to amphibolite facies metamorphism. The garnet–omphacite thermometry and the univariant reaction relations for jadeite formation give 13–21 kbar at 600 °C and 16–18 kbar at 750 °C for the eclogite formation using the jadeite content of clinopyroxene (X_Jd = 0.48).

Phengites in pelitic schists show variable Si / Al and Na / K ratios among grains as well as within single grains, and give K–Ar ages of 50–87 Ma. The pelitic schist with paragonite and phengite yielded K–Ar ages of 83.5 Ma (K = 4.9 wt.%) for paragonite–phengite mixture and 85.3 Ma (K = 7.8 wt.%) for phengite and an isochron age of 91 ± 13 Ma from the two dataset. The eclogite gives a plateau age of 132 Ma in Ar/Ar step-heating analyses using single phengite grain and an inverse isochron age of 130 ± 39 Ma with an initial ⁴⁰Ar / ³⁶Ar ratio of 434 ± 90 in Ar/Ar spot analyses of phengites and paragonites. The Cretaceous isochron ages are interpreted to represent the timing of early stage of exhumation of the eclogitic rocks assuming revised high closure temperature (500 °C) for phengite K–Ar system. The phengites in pelitic schists have experienced retrograde reaction which modified their chemistry during intense deformation associated with the exhumation of these rocks with the release of significant radiogenic ⁴⁰Ar from the crystals. The argon release took place in the schists that experienced the retrogression to upper greenschist facies metamorphisms from the eclogite facies conditions.     

Fuzzy expert system for economic zonation of an ornamental slate deposit

Investigation of deposits for traditional extraction activities (metals and coal) has generally been based on determining grade, or content, of the required material. In order to apply the grade concept to an ornamental rock such as slate, it is first necessary to define the variables that determine both the geotechnical recovery rate for the rock mass — which conditions the size of the extracted blocks – and the aesthetic features of the slate — which define the quality of the slabs as potential roofing material.

For this research, geotechnical and aesthetic data for a slate deposit were collected from 16 continuous core borehole samples. A fuzzy expert system was then developed using this data, defining the rock mass recovery rate and slab quality in accordance with the criteria of a slate expert, producing as a final output a zonation of the deposit in terms of top quality slate, medium quality slate or waste.

A mathematical model based on fuzzy logic was chosen due to the fact that the boundaries between different quality groups in a deposit are not clearly distinguished. Moreover, quality also depends on a company's infrastructures for transformation of the blocks, and also on its commercial strategies.     

A Decision Support System for the Evaluation of Eco-engineering Strategies for Slope Protection

A decision support system (DSS) has been developed to assist expert and non-expert users in the evaluation and selection of eco-engineering strategies for slope protection. This DSS combines a qualitative hazard assessment of erosion and mass movements with a detailed catalogue of eco-engineering strategies for slope protection of which the suitability is evaluated in relation to the data entered. The slope decision support system (SDSS) is a knowledge based DSS in which knowledge is stored in frames containing rules that can evaluate the available information for a project, stored as project specific information (PSI) in a data file. The advantages of such a system are that it accepts incomplete information and that the qualitative nature of the information does not instil the user with a sense of unjustified exactitude. By its multidisciplinary and progressive nature, the DSS will be of value during the initial stages of an eco-engineering project when data collection and the potential of different eco-engineering strategies are considered. The accent of the output of the DSS is on the application of eco-engineering strategies for slope protection as an environmentally-friendly solution aiding sustainable development. For its acceptance within the engineering community, the DSS needs to prove its predictive capacity. Therefore, its performance has been benchmarked against successful and unsuccessful cases of slope stabilisation using eco-engineering. The target audience and the areas of application of this DSS are reviewed and the strategies for further development in this area suggested.     

Real Time Analysis and Forecasting of Strata Caving Behaviour during Longwall Operations

Summary. Discontinuous manual observations and irregular caving characteristics of roof rocks often lead to improper decisions resulting in accidents and production loss. Hence, systematic monitoring of the hanging roof behind the chock shields is necessary for safe and productive mining operations. A real-time application was successfully implemented in an Indian mine for forecasting of hanging roof behaviour to enhance safety and productivity. This paper reports the functioning of real-time TWAP (time weighted average pressure) analysis in the forecasting of hanging roof behaviour in real time.     

Karst groundwater protection in the Kupa River catchment area and sustainable development

One of the most significant water resources in the Republic of Croatia is the catchment area of the Kupa River, located in the region bordering the Republic of Slovenia. About 88% of the total amount of water in this catchment originates in Croatia and just 12% from Slovenia; therefore, the largest part of the catchment area (about 1000 km²) is on the Croatian side of the border. It is a typical karst area of the Dinarides with aquifers characterized by a relatively rapid water exchange, high groundwater flow velocities and aquifers open to human impact from the surface. Consequently, the aquifers are highly vulnerable and at risk. Due to the availability of large quantities of high-quality spring water (about 6 m³/s), the entire area has a strategic importance within the context of any future development strategy pertaining to the western part of Croatia. The catchment area on the Croatian side was investigated using a wide range of research methods that included a classical hydrogeological approach, the detailed hydrologic calculation of water balance to the hydrogeochemical analyses and modelling. The objective was to determine protection zones and protection measures for the whole area. The difficulties are increased due to the fact that the karst catchment area is crossed by major traffic corridors, oil pipelines and a railway and that many settlements and a highly developed wood industry are present. The combination of protecting water resources with adequate prevention measures and necessary remedial activities that should satisfy the very strict requirements necessary for the protection of the karst aquifers while still allowing for present and future human activities is difficult – but not impossible – to achieve. One good example is the present highway with a closed dewatering system and waste water treatment before the water passes into the karst underground system.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.