海洋平台结构振动的AMD主动控制参数优化分析

本文针对海洋平台结构的冰激振动和地震反应控制问题，提出了采用AMD主动控制的控制策略，结合JZ20－2MUQ平台结构进行了AMD控制系统的硬参数和软参数的优化分析，并就相应于最优参数下的AMD控制海洋平台结构冰激振动和地震反应的几种代表性工况进行了时程分析，得到了一些定性和定量的结论，为实际工程的控制设计提供了基础。本文提出的AMD主动控制方法对类似的海洋平台结构的控制问题也有参考价值。     

Exploring some relationships between biological soil crusts, soil aggregation and wind erosion

A portable wind tunnel was used to test the contribution of biological and physical elements to overall soil aggregation on a soil dominated by biological soil crusts in south-eastern Australia. After moderate disturbance and simulated wind erosion, 90% of surface aggregates on the loamy soil and 76% on the sandy soil were dominated by biological elements (cryptogams). Lower levels of biological bonding were observed on the severely disturbed treatment. Linear regression indicated a significant positive relationship (r²=0·72) between biological soil crust cover and dry aggregation levels greater than 0·85mm. To maintain sediment transport below an erosion control target of 5gm⁻¹s⁻¹ for a 65kmh⁻¹ wind at 10m height, a crust cover of approximately 20% is required. When a multiple regression model which sequentially fitted biological crust cover and dry aggregation greater than 0·85mm was applied to the data, dry aggregation accounted for more of the variation in sediment transport rate than biological crust cover. These data were used to develop a conceptual model which integrates crust cover and dry aggregation, and provides a useful framework within which to predict the likely impacts of changes in soil crust cover and aggregation.     

热害矿井巷道温度场分布规律研究

为解决深部开采带来的热害问题，基于地质学和热力学理论，建立了热害矿井巷道温度场的数学模型，研究了巷道内部温度场随埋深和通风热速的变化规律。计算结果表明，巷道温度场对埋深的敏感度要高于风速、温度随埋深的增加而呈阶段性递增。控制入口温度是解决矿井热害的关键。以上结论为矿井热害的综合治理提供了重要依据。     

天然含钒金红石加热、淬火及电子辐射改性实验研究

天然含钒金红石样品经过1273K加热、淬火和高能电子辐照处理后性质发生不同程度的变化。XRD谱峰显示处理前后样品没有发生物相变化，显微IR图谱证明原样、加热、淬火样品的表面有少量吸附水存在，而辐射样品的显微IR图谱上没有检测到吸附水的吸收峰。用XPS分析比较了处理前后样品表面主要元素Ti、O和V的价态及含量，结果表明，原样经过处理后表面钒和氧的原子百分含量增加，其中淬火样品表面吸附水和钒的含量相对于原样增加最为明显，光催化活性相应较高；加热样品表面的吸附水和钒的含量比原样稍有增加，光催化活性与原样相当；电子辐射样品表面钒的原子百分含量相对原样增加不明显，而对水的吸附能力相对原样较低，光催化效率也略低。     

电子探针化学测年方法

介绍含Th U Pb矿物电子探针化学测年方法的基本原理 ,并利用应用实例说明该方法在研究岩石形成年龄、构造热事件年代等方面的重要作用 ,最后简要评价该方法的优、缺点 ,并指出它的应用前景 ,认为电子探针化学测年方法将有可能在深源岩石包体年龄研究、含放射性元素矿床形成年代研究等方面大有作为 ,并使地质年代学研究更加精细化 ,有助于深入探讨复杂地质事件及其演化历程。     

Recent ventifact development on the central Oregon coast,western USA

The unusual location of ventifacts, on a boulder‐built jetty at the mouth of the Siuslaw River, Oregon coast, western USA, allows ventifact age and wind abrasion rates to be estimated with some precision. The jetty was built mainly between 1892–1901 and extended throughout the twentieth century. Consideration of historical shoreline position and the history of jetty construction and repair suggests the ventifacts have formed since about 1930. Morphologically the ventifacts are aligned south‐to‐north reflecting winter winds and sediment transport from the adjacent beach. Wind‐parallel grooves and ridges with sharp, sinuous crests are developed on inclined boulder surfaces on top of the jetty and reflect suspended sand transport in wind vortices. Deeply pitted surfaces on steep boulder surfaces nearest the beach reflect impact by saltating sand grains. Based on present wind regimes (1992–2000) from three regional weather stations, southerly winds above the sand transport threshold occur for 21·9–29·6 per cent of the time. Based on estimated depth of loss from boulder surfaces, wind abrasion rates are calculated to be on the order of 0·24–1·63 mm a^?1. This is the first well‐constrained field estimate of ventifact age and ventifaction rate from a modern coastal environment. Copyright © 2003 John Wiley & Sons, Ltd.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

Early Cretaceous planktonic foraminifera from the Tethys: the large, many-chambered representatives of the genus Globigerinelloides

This paper deals with the taxonomic revision of the Early Cretaceous large, many-chambered planispiral planktonic foraminifera, historically assigned to the genus Globigerinelloides or alternatively assigned in the 1990s to the genera Globigerinelloides Cushman and ten Dam, Biglobigerinella Lalicker, Blowiella Krechmar and Gorbachik and Alanlordella BouDagher-Fadel. In a previous paper we demonstrated that the morphological and microstructural features used in the literature for distinguishing Blowiella from Globigerinelloides have value only at species level, and the former genus was thus invalidated (being the junior synonym). Moreover, the Late Aptian specimens assigned to Biglobigerinella by some authors, based on the presence of twin last chamber(s), are also included in Globigerinelloides because individuals sharing the same features (number of chambers, growth rate, size of umbilicus, and a finely perforate wall) may or may not possess twin last chamber(s). Meanwhile, Moullade et al. questioned the taxonomic value of Alanlordella, erected by BouDagher-Fadel to accommodate planispiral taxa possessing a macroperforate wall. All the species analysed here possess a finely perforate wall and consequently cannot be assigned to this taxon.The large species of Globigerinelloides retained here, with six or more chambers in the outer whorl, are G. algerianus Cushman and ten Dam, G. aptiensis Longoria, G. barri (Bolli, Loeblich and Tappan) and G. ferreolensis (Moullade).In the sections studied, Globigerinelloides aptiensis was first found close to the Barremian/Aptian boundary, even though this species was recorded in Spain (Rio Argos) in the mid Upper Barremian; very rare, small, seven-chambered individuals here assigned to Globigerinelloides ferreolensis are recorded in the Lower Aptian (just below and within the Selli Level, OAE1a), while a few specimens belonging to Globigerinelloides barri occur in the Globigerinelloides ferreolensis Zone (Upper Aptian). Globigerinelloides aptiensis and G. ferreolensis range up to the Ticinella bejaouaensis Zone while Globigerinelloides barri disappears at the top of the Globigerinelloides algerianus Zone; finally, Globigerinelloides algerianus obviously spans the eponymous total range zone.From an evolutionary point of view, two lineages within the many-chambered Globigerinelloides have been recognized. In the first, already known in the literature, Globigerinelloides aptiensis gave rise to G. ferreolensis, which evolved into G. algerianus; the latter in turn gave rise to Pseudoplanomalina cheniourensis as the final evolutionary member. In the second lineage Globigerinelloides barri originated from G. blowi.     

天津气象塔风温梯度观测资料的统计特征

利用天津气象塔风温梯度观测资料对其统计特征及平均风温廓线的日变化规律进行了分析，特别是分析了稳定层结的风温廓线特征，还给出了几种典型天气的低层大气结构的个例分析。     

一次梅雨锋降水系统三维风场双、三雷达对比研究

2002年，“我国重大气候和天气灾害的形成机理与预测理论研究”项目首次启用三多普勒天气雷达组网对暴雨系统进行同步观测，作者使用MUSCAT技术对6月24日梅雨锋雨带上的一个中β系统进行了双、三多普勒雷达三维风场对比分析，表明大气中低层辐合线是此次暴雨系统的一个重要特征。