AutoCAD技术在道路工程施工测量中的应用

在道路建设中,通常分为几个标段同时施工,每个标段里一般包括路基及各种构造物,因此,施工测量任务十分繁重,由于全站仪在工程测量中的普遍应用,其极坐标放样功能使测量工作中出现错误主要为坐标计算错误,特别是具有记忆功能的全站仪,可以事先输入坐标,复核后再到现场放样。所以测量的主要工作就是根据施工图纸计算其各个部位的坐标,而如何快速、准确地计算坐标是关键所在。应用AutoCAD技术进行坐标定位计算,则可以做到事半功倍,并能取得良好的施工效果。     

“青藏高原南部空白区基础地质调查与研究”计划项目新成果、新进展

通过2 0 0 4年度各相关图幅的大力工作,在基础地质、矿产和资源等方面取得了大量实际材料,综合研究区域构造地层格架、青藏高原地质图和青藏高原南部火山岩及其地球动力学意义等,取得重要进展和新认识,在矿产资源、旅游和人文景观等方面也取得重要阶段性成果。     

箱形基础上浮病害整治技术

结合箱形基础不均匀上浮工程病害实例，综合分析了病害原因，提出了应用高压灌浆和抗浮锚杆工艺进行处治的方案。     

Characterization of hydrogeologic properties for a multi-layered alluvial aquifer using hydraulic and tracer tests and electrical resistivity survey

A multi-layered aquifer, typical of riverbank alluvial deposits in Korea, was studied to determine the hydrologic properties. The geologic logging showed that the subsurface of the study site was comprised of four distinctive hydrogeologic units: silt, sand, highly weathered and fresh bedrock layers. The electrical resistivity survey supplied information on lateral extension of hydrogeologic strata only partially identified by a limited number of the geologic loggings. The laboratory column tracer test for the recovered core of the sand layer resulted in a hydraulic conductivity of 5.00×10⁻² cm/s. The slug tests performed in the weathered rock layer yielded hydraulic conductivities of 4.32–7.72×10⁻⁴ cm/s. Hydraulic conductivities for the sand layer calculated from the breakthrough curves of bromide ranged between 2.08×10⁻³ and 2.44×10⁻² cm/s with a geometric mean of 6.89×10⁻³ cm/s, which is 7 times smaller than that from the laboratory column experiment. The trend of increasing hydraulic conductivity with an increase in tracer travel length is likely a result of the increased likelihood of encountering a high conductivity zone as more of the aquifer is tested. The combined hydrogeologic site characterization using hydraulic tests, tracer tests, and column test with geologic loggings and geophysical survey greatly enhanced the understanding of the hydrologic properties of the multi-layered alluvial aquifer.     

Quantitative estimation of submarine groundwater discharge using airborne thermal infrared data acquired at two different tidal heights

Submarine groundwater discharge (SGD) plays an important role in coastal biogeochemical processes and hydrological cycles, particularly off volcanic islands in oligotrophic oceans. However, the spatial and temporal variations of SGD are still poorly understood owing to difficulty in taking rapid SGD measurements over a large scale. In this study, we used four airborne thermal infrared surveys (twice each during high and low tides) to quantify the spatiotemporal variations of SGD over the entire coast of Jeju Island, Korea. On the basis of an analytical model, we found a linear positive correlation between the thermal anomaly and squares of the groundwater discharge velocity and a negative exponential correlation between the anomaly and water depth (including tide height and bathymetry). We then derived a new equation for quantitatively estimating the SGD flow rates from thermal anomalies acquired at two different tide heights. The proposed method was validated with the measured SGD flow rates using a current meter at Gongcheonpo Beach. We believe that the method can be effectively applied for rapid estimation of SGD over coastal areas, where fresh groundwater discharge is significant, using airborne thermal infrared surveys.     

甘肃省第一次全国地理国情普查数据库设计

地理国情普查数据库是地理国情普查成果数据存储、管理和分发应用的基础,为地理国情动态监测提供本底数据库。本文从甘肃省实际情况出发,结合信息化测绘服务体系和"天地图·甘肃"等现有成果,从数据库概念设计、逻辑设计、物理设计、接口设计,以及数据库管理系统和地理国情展示系统等方面进行了详细的设计,为全面开展地理国情普查数据库建设奠定了坚实的基础。     

齐齐哈尔市地理国情分析与表达

以齐齐哈尔市为例,利用地理国情普查数据与统计年鉴数据,构建自然地表指数、地理区位指数、生态覆被指数,对齐齐哈尔市各县、区的地理国情进行综合分析和地图表达。结果表明,齐齐哈尔市的总体条件较好,但区域差异较大,自然地表条件与地理区位条件均以中部的齐齐哈尔市辖区为优,而生态覆被条件则以北部和西部地区为优。     

基于MapGIS的地理国情普查研究与应用

随着第一次全国地理国情普查工作的全面开展,出现了众多地理国情信息数据处理软件,数据的采集和制作也遇到了各种各样的问题,我们利用MapGIS平台对软件的内部模块和功能进行了有效的利用,并得到了很好的应用效果。