Generalized strain probing of constitutive models

Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd.     

A note on turbulent perturbations of salinity in a partially mixed estuary

Measurements of salinity perturbations in a partially mixed estuary have been used to evaluate the usefulness of an inductive salinometer and to determine some of the characteristics of the salinity perturbations. The salinometer performed satisfactorily under most conditions. Although internal wave like effects were present, the turbulence fluctuations were dominant. The salinity fluctuations and the turbulent fluxes $\text{sw}$ and $\text{su}$ were found to behave in a manner similar to the density fluctuations in a thermally stratified atmospheric boundary layer and a laboratory open channel flow. A quadrant analysis suggested that the contribution of each quadrant to the turbulent flux changed with Ri. The turbulence parameters ν and c_γ were found to decrease and increase respectively as Ri increases.     

Simulating methane emission from a Chinese rice field as influenced by fertilizer and water level

Natural and agricultural wetlands are considered to be the major sources of global atmospheric methane (CH₄). A one‐dimensional model was developed to simulate methane emission and used to examine the influence of various physical processes on the rate of methane emission. Three processes involved in the methane emission are implemented in the model: production, reoxidation and transport. Three transport pathways were considered: diffusion across water–air or soil–air interfaces, ebullition and diffusion through plants. These pathways are influenced by soil properties, plant growth, water‐table conditions, temperature and external inputs (e.g. fertilizer). The model was used to examine the seasonal variation of the methane emission at a rice field in Hunan, China, which was observed during a field experiment for consecutive (early and late) rice seasons in 1992. The observed seasonal variations of methane emission, and role of plants in transporting methane to the atmosphere, are captured by the model simulation. Further model applications were conducted to simulate effects of fertilizer and water‐level condition on the methane emission. The results indicate that unfermented organic fertilizer produces a higher methane emission rate than mineral fertilizer. The simulations with treatments of a deep‐water covering and constant moisture reduced the methane emission. The rice field study provides a framework for further development of the model towards simulations based on spatially distributed variables (e.g. water table, soil temperature and vegetation) at a regional scale. Copyright © 2003 John Wiley & Sons, Ltd.     

基于荧光原理的叶绿素a传感器校准方法研究

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。     

Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.     

The periodic variations of the core drift rate: global and zonal motions (Mitteilung des Zentralinstituts für Physik der Erde,Nr. 1746)

Toroidal zonal motions at the top of the Earth's core were computed from the observed secular variation and investigated with regard to their time dependence. Previously derived results for a pure westward drifting core could be re-examined. Additionally, the well-known 66.7 years period was found to be an oscillation of the zonal velocity field of third degree. With respect to periodic constituents, the total magnetic core-mantle coupling torque according to the zonal motions is comparable with that derived for a pure westward drifting core. Some differences in period lengthes and amplitudes do not remove previously stated differences between the spectra of the magnetic and mechanical torques on principle.     

地磁场能量在地球内部的分布及其长期变化

用国际参考地磁场模型(IGRF)分析了地磁场能量在地球内部的分布及其长期变化.结果表明,从1900年到2005年,地核以外地磁场总能量由6.818×1018J减少到6.594×1018J,减小了3.3%,地表以外地磁场总能量由8.658×101J减小到.63×101J,减小了11.4%.分析地球内部不同圈层地磁场能量的变化表明,地壳(A层)、上地幔(B层)、转换带(C层)、下地幔D′层的地磁场总能量在减小,但是下地幔"层的地磁场总能量却在快速增加.磁能密度随时间的变化更清楚地显示出磁能增加和减小的分界面在r=3840km处.上述结果表明,地核和地表以外地磁场总能量在趋势性减小的同时,也在进行重新分配.进一步分析表明,下地幔D"层磁能快速增长,主要是由高阶磁多极子的增强引起的.在地磁场倒转前,偶极矩减小而多极性相对增强在能量分布上的表现就是磁能向下地幔底部(特别是D"层)集中.     

PolarGlobe: A web-wide virtual globe system for visualizing multidimensional,time-varying,big climate data

The increasing research interest in global climate change and the rise of the public awareness have generated a significant demand for new tools to support effective visualization of big climate data in a cyber environment such that anyone from any location with an Internet connection and a web browser can easily view and comprehend the data. In response to the demand, this paper introduces a new web-based platform for visualizing multidimensional, time-varying climate data on a virtual globe. The web-based platform is built upon a virtual globe system Cesium, which is open-source, highly extendable and capable of being easily integrated into a web environment. The emerging WebGL technique is adapted to support interactive rendering of 3D graphics with hardware graphics acceleration. To address the challenges of transmitting and visualizing voluminous, complex climate data over the Internet to support real-time visualization, we develop a stream encoding and transmission strategy based on video-compression techniques. This strategy allows dynamic provision of scientific data in different precisions to balance the needs for scientific analysis and visualization cost. Approaches to represent, encode and decode processed data are also introduced in detail to show the operational workflow. Finally, we conduct several experiments to demonstrate the performance of the proposed strategy under different network conditions. A prototype, PolarGlobe, has been developed to visualize climate data in the Arctic regions from multiple angles.     

Assimilating data into open ocean tidal models

The problem of deriving tidal fields from observations by reason of incompleteness and imperfectness of every data set practically available has an infinitely large number of allowable solutions fitting the data within measurement errors and hence can be treated as ill-posed. Therefore, interpolating the data always relies on some a priori assumptions concerning the tides, which provide a rule of sampling or, in other words, a regularization of the ill-posed problem. Data assimilation procedures used in large scale tide modeling are viewed in a common mathematical framework as such regularizations. It is shown that they all (basis functions expansion, parameter estimation, nudging, objective analysis, general inversion, and extended general inversion), including those (objective analysis and general inversion) originally formulated in stochastic terms, may be considered as utilizations of one of the three general methods suggested by the theory of ill-posed problems. The problem of grid refinement critical for inverse methods and nudging is discussed.     

地球重力场、重力、重力梯度在三维直角坐标系中的表达式

现代卫星重力测量主要利用星载GPS接收机、加速度计、星载测距仪等来确定重力卫星的轨道,削弱非保守力的干扰,由此根据卫星的位置、速度及其变率来确定地球重力场。而上述GPS等星载仪器所提供的数据,包括卫星轨道坐标及其速率、扰动加速度、星间距离及其变率,都是以三维直角坐标(x,y,z)的形式表示的,因此,地球重力场、重力和重力梯度在三维直角坐标系中的表达式在卫星重力解算中具有实际意义。