地质学家重视研究深部（变质）CO_2对古气候的影响

地质学家重视研究深部（变质）ＣＯ２对古气候的影响贾跃明（中国地质矿产信息研究院，北京，１０００３７）近几年来，随着过去全球变化研究的兴起，地质学家越来越重视地质历史时期影响大气ＣＯ２浓度的因素的调查。不少人认为，变质作用和火山活动可能是过去大气中ＣＯ...     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Numerical modeling of 3-D terrain effect on MT field

Using the boundary element method, the numerical modeling problem of three-dimensional terrain effect on magnetotelluric (MT) field is solved. This modeling technique can be run on PC in the case of adopting special net division. The result of modeling test for 2-D terrain by this modeling technique is basically coincident with that by 2-D modeling technique, but there is a great difference between the results of 3-D and 2-D modeling for 3-D terrain. Project supported by the National Natural Science Foundation of China.     

Prediction of the measured response of a scaled soil-pile-superstructure system

The validity of the Winkler foundation model is investigated by predicting the experimentally measured displacement transfer functions and strain spectra of a single pile embedded in a sandbox and supporting a single-degree-of-freedom superstructure. The foundation-superstructure system is a scale model and was subjected to shake table excitations. The distributed springs and dashpots of the Winkler foundation model are frequency dependent and the calibrated model predicts satisfactorily the displacement transfer function at different depths for both fixed- and free-tip pile conditions. On the other hand, the pile-axial-strains are substantially underestimated when expressed in terms of the second derivative of the computed elastic line of the pile. It is shown that a much more dependable prediction is achieved when pile-axial-strains are expressed in terms of the inertial forces acting along the pile-superstructure system.     

PART II: Comparison of Theoretical and Experimental Estimations of Site Effects

— To check the reliability and the quality of the theoretically estimated ground responses obtained from the 2-D simulation by the application of the hybrid method in PART-I, we compare some of them with those obtained at the same sites from observed data using the Standard Spectral Ratio (SSR). The comparison validates our synthetic modeling and shows that in cases of complex geometries, the use of at least 2-D numerical simulations is required in order to reliably evaluate site effects and thus facilitate the microzonation of the city of Thessaloniki.     

The role of diapycnal mixing for the equilibrium response of thermohaline circulation

Using a zonally averaged, one-hemispheric numerical model of the thermohaline circulation, the dependence of the overturning strength on the surface equator-to-pole density difference is investigated. It is found that the qualitative behavior of the thermohaline circulation depends crucially on the nature of the small-scale vertical mixing in the interior of the ocean. Two different representations of this process are considered: constant vertical diffusivity and the case where the rate of mixing energy supply is taken to be a fixed quantity, implying that the vertical diffusivity decreases with increasing stability of the water column. When the stability-dependent diffusivity parameterization is applied, a weaker density difference is associated with a stronger circulation, contrary to the results for a fixed diffusivity. A counterintuitive consequence of the stability-dependent mixing is that the poleward atmospheric freshwater flux, which acts to reduce the thermally imposed density contrast, strengthens the thermally dominated circulation and its attendant poleward heat transport. However, for a critical value of the freshwater forcing, the thermally dominated branch of steady states becomes unstable, and is succeeded by strongly time-dependent states that oscillate between phases of forward and partly reversed circulation. When a constant vertical diffusivity is employed, on the other hand, the thermally dominated circulation is replaced by a steady salinity-dominated state with reversed flow. Thus in this model, the features of the vertical mixing are essential for the steady-state response to freshwater forcing as well as for the character of flow that is attained when the thermally dominated circulation becomes unstable.Responsible Editor: Jin-Song von Storch     

Simulation of oasis breeze circulation in the arid region of the Northwestern China

In this paper, the process of oasis-desert circulation (ODC) is simulated by MM5V3.5 model through designing an ideal oasis-desert scheme and assuming that initial atmosphere is at rest (V = 0). The findings showed that the key of forming special oasis boundary structure is the difference of energy and water between oasis and desert. The evaporation of oasis surface consumes heat energy, and the low temperature of oasis causes an oasis breeze circulation (OBC), which drives an ODC with a downdraft over the oasis and an updraft over the desert. Later, the cold, dry and stable boundary over oasis is gradually formed, on the contrary,the atmospheric boundary over desert on the edge of oasis is hot, humid and unstable and its height is about 600 hPa. The updraft over the desert forms a wet ring that acts as a vertical wall weakening the low-level moisture exchange between the oasis and desert. The downdraft of OBC increases the atmospheric stability that reduces the oasis evaporation. The low-level outflow from the oasis (into the desert) prevents the dry, hot air flowing from the desert into the oasis.Thus an oasis self-preservation mechanism may be formed due to OBC. The horizontal area influenced by oasis is twice as oasis area and the vertical range is four times as oasis. The ODC is strong in the daytime and reaches the strongest at 17:00, and the influenced area is the largest at 20:00.     

Integrated spatial sampling modeling of geospatial data

Sampling is to, by efficient selection of samples, acquire the accurate information about the population (the research object) at less cost. Spatial sampling is a kind of sampling toward geospatial objects or features with spatial correlation. The differences between effi-cient sampling and completely universal survey lie in quality, time and cost. Sampling provides a kind of economical, prompt and accurate survey[13]. Efficient spatial sampling can be regarded as the optimization of the sampl…     

几种空气质量预报方法的预报效果对比分析

目前应用于我国各个城市空气质量预报业务的预报方法主要有三种 :数值模式预报、统计预报和综合经验预报。这几种预报方法都有其各自的优势 ,同时也存在一些不足。应用以上方法对天津市市区进行空气质量业务预报 ,通过实测资料与预报结果进行对比分析 ,给出这几种方法在天津市区空气质量预报中的预报效果客观评价。     

数值预报产品在夏季持续高温预报中的释用

利用 1999～ 2 0 0 2年 6～ 8月 96～ 192h日本数值预报产品 85 0hPa气温与吉林省的日平均气温、阶段性高温及极端最高气温 (长春市 )资料 ,通过线性分析 ,找出了日本数值预报产品的 85 0hPa气温与吉林省地面日平均气温、阶段性高温及极端最高气温的对应关系 :吉林省 6～ 8月日平均气温在 96～ 192h的 85 0hPa日本数值预报长春站日平均值上加 6 6～ 4 1℃ ,6～ 8月的极端最高气温在相应的日本数值预报产品上加 9 3～ 13 0℃。