地下圆形衬砌隧道对沿线地震动的影响(II):数值结果

利用地下圆形衬砌隧道对入射平面P波和SV波散射级数解答，定量分析了入射波长、入射角度、隧道直径、衬砌刚度等因素对沿线地表位移放大作用的影响。计算结果表明，当入射频率较低时，地下隧道的存在对地表位移幅值影响不大；而当入射频率较高时，地表位移幅值可以达到无隧道情况的4．5倍以上；衬砌情况下地表位移幅值可以高出非衬砌情况的87．8％。建议在地铁的规划设计中考虑地下隧道的建设对隧道沿线设计地震动的影响。     

绿片岩三轴流变力学特性的研究(II):模型分析

首先,基于在岩石全自动流变伺服仪上得到的绿片岩三轴流变试验曲线,采用五元件线性粘弹性模型对表现为粘弹性流变特性的曲线进行了辨识,获得了绿片岩的粘弹性流变参数;然后,提出了一个新的非线性粘性元件,并将其与塑性体并联起来,得到一个新的非线性粘塑性体(NVPB),该体能充分反映岩石的加速流变特性:同时,将NVPB模型与五元件粘弹性模型串联起来,建立了一个新的岩石七元件非线性粘弹塑性流变模型。采用绿片岩加速流变全过程曲线,对提出的岩石七元件非线性粘弹塑性流变模型进行了辨识,得到了岩石七元件非线性粘弹塑性流变模型的材料参数。流变模型与试验结果的比较,显示了所建模型的正确性与合理性。     

Phillips模式的斜压不稳定的非线性饱和问题:能量情形

A conservation law for the Phillips model is derived. Using this law, the nonlinear saturation of purely baroclinic instability caused by the vertical velocity shear of the basic flow in the Phillips model-the case of energy-is studied within the context of Arnold's second stability theorem. Analytic upper bounds on the energy of wavy disturbances are obtained. For one unstable region in the parameter plane, the result here is a second-order correction in ε to Shepherd's; For another unstable region, the analytic upper bound on the energy of wavy disturbances offers an effective constraint on wavy (nonzonal) disturbances φ'i at any time.     

Laboratory Studies Of Wind Stress Over Surface Waves

Simultaneous laboratory observations of wind speed, wind stress, and surfacewind-wave spectra are made under a variety of wind forcing patterns using cleanwater as well as water containing an artificial surfactant. Under typical experimentalconditions, more than half of the total stress is supported by the wave-induced stressrather than by the surface viscous stress. When the surfactant reduces the shortwind-wave spectra, the wind stress also decreases by as much as 20–30% at agiven wind speed. When the wind forcing is modulated in time, the wind stresstends to be higher under decreasing wind than under increasing wind at a givenwind speed, mainly because the response of short wind-wave spectra to varyingwind forcing is delayed in time. These examples clearly demonstrate that therelationship between the wind speed and the wind stress can be significantlymodified if the surface wave field is not in equilibrium with the wind forcing.Next, we examine whether the wind stress is estimated accurately if the wave-inducedstress by all surface wave components is explicitly evaluated by linear superpositionand is added to the surface viscous stress. It is assumed that the surface viscous stressis uniquely related to the wind speed, and that the wind input rate is determined by thelocal, reduced turbulent stress rather than the total stress. Our wind stress estimatesincluding the wave contributions agree well with observed wind stress values, evenif the surface wave field is away from its equilibrium with the wind in the presenceof surface films and/or under time-transient wind forcing. These observations stronglysuggest that the wind stress is accurately evaluated as a sum of the wave-induced stressand the surface viscous stress. At very high winds, our stress estimates tend to be lowerthan the observations. We suspect that this is because of the enhancement of wind stressover very steep (or breaking) short wind-waves.     

Ground‐shaking mapping for a scenario earthquake considering effects of geological conditions: a case study for the 1995 Hyogo‐ken Nanbu,Japan earthquake

In order to examine the applicability of ground‐shaking mapping techniques to a near‐field earthquake, a peak ground velocity map of the 1995 Hyogo‐ken Nanbu, Japan earthquake computed from seismic zoning methods that consider the effects of geological conditions is compared with the actual observed intensity map. When computing the ground‐shaking map, the site amplification at each site is calculated in terms of the average shear‐wave velocity of the ground estimated from the corresponding geomorphological conditions. This map shows a relatively good agreement with the observed intensity map. However, the computations provide smaller values for certain disastrous areas of the earthquake, where the effects on ground motion of a deep, irregular underground structure have been reported. The effect of such structures on site response is examined implementing 2D FEM analyses, thereby being also incorporated into the method. Results considering the effect of the irregular underground structure show better agreement with the observed intensity map. Copyright © 2002 John Wiley & Sons, Ltd.     

Numerical Calculation of Equivalent Cell Permeability Tensors for General Quadrilateral Control Volumes

A new method for upscaling fine scale permeability fields to general quadrilateral-shaped coarse cells is presented. The procedure, referred to as the conforming scale up method, applies a triangle-based finite element technique, capable of accurately resolving both the coarse cell geometry and the subgrid heterogeneity, to the solution of the local fine scale problem. An appropriate averaging of this solution provides the equivalent permeability tensor for the coarse scale quadrilateral cell. The general level of accuracy of the technique is demonstrated through application to a number of flow problems. The real strength of the conforming scale up method is demonstrated when the method is applied in conjunction with a flow-based gridding technique. In this case, the approach is shown to provide results that are significantly more accurate than those obtained using standard techniques.     

Momentum transport of wave zero during March: A possible predictor for the Indian summer monsoon

Analysis of monthly momentum transport of zonal waves at 850 hPa for the period 1979 to 1993, between ‡S and ‡N for January to April, using zonal (u) and meridional (v) components of wind taken from the ECMWF reanalysis field, shows a positive correlation (.1% level of significance) between the Indian summer monsoon rainfall (June through September) and the momentum transport of wave zero TM(0) over latitudinal belt between 25‡S and 5‡N (LB) during March. Northward (Southward) TM(0) observed in March over LB subsequently leads to a good (drought) monsoon season over India which is found to be true even when the year is marked with the El-Nino event. Similarly a strong westerly zone in the Indian Ocean during March, indicates a good monsoon season for the country, even if the year is marked with El-Nino. The study thus suggests two predictors, TM(0) over LB and the strength of westerly zone in the Indian Ocean during March.     

有限弹性变形地壳中的地震波

地壳由半无限大的基岩上一层厚度为H^-的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。当浅源大地震发生时，在极震区以外行波传播产生地面运动将使地壳介质有非线性的有限弹性变形。用小参数摄动法使非线性控制方程为线性化的小参数各阶控制方程，得出头两阶线性控制方程的解析解。     

Determining Q of near-surface materials from Rayleigh waves

High-frequency (≥2 Hz) Rayleigh wave phase velocities can be inverted to shear (S)-wave velocities for a layered earth model up to 30 m below the ground surface in many settings. Given S-wave velocity (V_S), compressional (P)-wave velocity (V_P), and Rayleigh wave phase velocities, it is feasible to solve for P-wave quality factor Q_P and S-wave quality factor Q_S in a layered earth model by inverting Rayleigh wave attenuation coefficients. Model results demonstrate the plausibility of inverting Q_S from Rayleigh wave attenuation coefficients. Contributions to the Rayleigh wave attenuation coefficients from Q_P cannot be ignored when Vs/V_P reaches 0.45, which is not uncommon in near-surface settings. It is possible to invert Q_P from Rayleigh wave attenuation coefficients in some geological setting, a concept that differs from the common perception that Rayleigh wave attenuation coefficients are always far less sensitive to Q_P than to Q_S. Sixty-channel surface wave data were acquired in an Arizona desert. For a 10-layer model with a thickness of over 20 m, the data were first inverted to obtain S-wave velocities by the multichannel analysis of surface waves (MASW) method and then quality factors were determined by inverting attenuation coefficients.     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.