AN EXPERIMENTAL STUDY ON THE PROCESS OF INTERGRANULAR PRESSURE SOLUTION OF PLAGIOCLASE GOUGE UNDER HIGH TEMPERATURE AND PRESSURE: METHOD AND PRELIMINARY RESULTS

To understand the mechanism of lower-crust earthquake and slow slips, it is necessary to study the frictional properties of mafic rocks and their major rock-forming minerals. Previous studies have performed a series of experimental researches on gabbro, basalt and their major constituents. According to the results of previous experiments, frictional sliding of plagioclase under hydrothermal conditions(100~600℃)shows a property of velocity weakening, and the experimental results show that both the direct rate effect parameter(a)and the healing effect parameter(b)increase with temperature, a typical feature for thermally-activated processes. Velocity weakening means property of a shear band that has a stronger friction healing effect than the direct rate effect in the rate and state friction constitutive framework, and the healing effect(b value)in constitutive relation mainly reflects the increase in contact area with time under hydrothermal conditions, with some minor effect of structural changes. Since the microphysical mechanism of feldspar minerals at the contacts is mainly brittle cataclasis for temperatures below 600℃, the significant frictional healing effect in this case can only be explained by the mechanism of pressure solution. In order to determine if the dissolution process of plagioclase actually occurs on the laboratory time scale, we conducted hydrostatic experiments on plagioclase powder samples under hydrothermal conditions whereby frequent contact switch between particles seen in frictional sliding experiments can be avoided, making the observation on the dissolution sites possible. Experimental temperatures were 400℃ and 500℃, with confining pressure of 90~150MPa, pore pressure of 30MPa, with 2mm initial thickness of fault gouge. The mechanical data show that a creep process occurred in the plagioclase fault gouge in the experimental temperature and pressure range; and the microstructures of the experiment show that precipitation of new grains is prevalent as the product of pressure solution process between plagioclase particles. At the same time, it is observed that the contact points have an appearance similar to fused, fuzzy structure as signatures of dissolution. The results of our experiments provide a definite experimental evidence for the healing mechanism in friction of plagioclase and for the theoretical relation between unstable slip and the pressure solution process. The results of the experiments are summarized as follows: (1)Drainage rate of pore water in plagioclase gouge was high in the first few hours of experiment, but gradually decreases over time for both temperature and pressure series of experiments slowing down to a steady state. This feature indicates that there is a creep process that evolves inside the plagioclase gouge. In the temperature-series experiments, the drainage rate of the pore water in the plagioclase gouge at 400℃ is relatively low than the cases for higher temperatures. Thus, the applied temperature is positively correlated with the creep of plagioclase gouge. (2)Scanning electron microscopy(SEM)observations of the experimentally deformed samples were performed on thin sections cut along the sample axis. Firstly, from the images of microstructure, it was found that the degree of particle fracture became more significant at a higher effective pressure, with smaller pore volume between particles. In the temperature-series experiments it was found that the degree of compaction of plagioclase gouge increased with increasing temperature. Precipitation of plagioclase grains in layered structures was generally observed in high-magnification images, indicating the presence of pressure solution processes. Contact points were also found to be in a state of ambiguity that seems to be a fused morphology, but the details of the structure remain to be determined by further observations. The above results indicate that the pressure solution process of plagioclase particles can occur on a typical laboratory time scale, and the results of this study provide robust experimental evidences for the theory that links between pressure solution and the mechanism of frictional healing and unstable slips for plagioclase.     

应变率效应对600 MPa级高强钢筋混凝土框架结构抗震性能影响研究

为了更真实地进行钢筋混凝土结构抗震性能评估,应该考虑材料的应变率效应影响。600 MPa级高强钢筋作为新一代建筑钢材,尚无考虑应变率效应影响的600 MPa级高强钢筋混凝土框架结构抗震性能研究。首先进行了不同应变率下600 MPa级高强钢筋拉伸力学性能试验,利用试验数据拟合得到600 MPa级高强钢筋在不同应变率下的强度提高系数表达式,并利用OpenSees软件进行了配置600 MPa级高强钢筋混凝土框架结构抗震性能模拟分析,研究了应变率效应对框架结构抗震性能的影响。研究结果表明:随着应变率的增大,钢筋的屈服强度和极限强度均得到提高,屈服强度最大提高11.5%,极限强度最大提高8.9%;随着所考虑的材料应变率增加,配置600 MPa级高强钢筋框架结构最大顶点位移总体上呈减小趋势,地震波强度越强,应变率效应影响越大,而层间位移角减小幅值相差不大。研究成果可作为600MPa级高强钢筋混凝土框架结构抗震评估的依据。     

水工工程对长江下游渔业的胁迫与补偿

长江下游及河口区鱼类物种丰富,特有性高,能构成渔汛的经济品种均集中在该江段,其可捕的经济鱼类品种及渔获量为全江之首,该水域鱼类区系复杂,是长江物种多样性最为丰富的区域之一,随长江干流上水工建筑的大量建造,江湖被隔绝,洄游通道被阻断,海水的入侵、生境的破碎、水文条件的改变等导致了渔业生态功能的削弱,对下游鱼类可捕量、天然鱼类资源、物种多样性、种质资源产生了严重影响,通过对下游渔业资源特征进行了描述,结合当前重大水工建筑:水电工程、调水工程、航道工程、大桥工程及沙石开采工程,介绍了长江水工工程的规模与现状,探讨了不同工程对鱼类环境业已显现的影响,以及对渔业生态和资源的破坏作用,剖析水工工程对渔业可能造成的潜在伤害,同时就工程规划的设计理念、渔业生态的补偿措施提出了建议,指出渔业部门应尽的责任和义务,提出了保护下游渔业资源和生态环境急待开展的科学研究任务.     

双平板式透空堤消能效果评价方法

双平板式透空堤具有较为优越的消浪性能备受专家学者关注。目前关于其消浪性能的评价多采用透射波高法开展,仅考虑波高一个参数。本文采用透射波高法、波浪能量法和波能流法分别对平板式透空堤的消能效果进行评价,结果表明,综合考虑波高、水深和周期三个参数的波能流法更加全面与深入。探讨了双平板式透空堤迎浪向与背浪向处波能流的主要影响因素,结果表明,相对板宽、位置参数和波高大小对波能流的影响较板间距和潜深更加显著。     

城市密集建筑群对沉积谷地地震动放大效应的影响

采用有限元模拟方法建立了建筑群-沉积谷地二维模型,并在土体截断边界上施加粘弹性人工边界,在频域与时域中对比分析此体系和单独沉积谷地的地震反应,观察地震时沉积谷地与建筑群之间的动力相互作用规律。分析表明,沉积谷地中建筑群对谷地本身的地震反应具有显著影响。入射波频率较低时,由于共振效应的存在,在部分区域处建筑群-沉积谷地体系的地表位移响应幅值会大于单独沉积谷地,但随着入射波频率的增加,建筑群的存在又会对地震反应产生明显的减弱效果;建筑群对谷地的影响还与建筑高度和建筑间距有关,且不同位置处的响应也存在很大差异。计算结果可为沉积谷地中设防烈度的设置以及工程抗震设计提供部分理论依据。     

几种大型海藻对赤潮异弯藻生长抑制效应的初步研究

利用共存培养系统研究了大型海藻缘管浒苔、刚毛藻、石花菜、鸭毛藻、扇形拟伊藻、蜈蚣藻、海黍子、脆江蓠对赤潮异弯藻(Heterosigma akashiwo)生长的抑制效应并和孔石莼的作用进行比较。实验指出：孔石莼和缘管浒苔对赤潮异弯藻的抑制效应最强,石花菜次之;扇形拟伊藻、蜈蚣藻、刚毛藻、脆江蓠、海黍子虽表现出抑制作用但较差;鸭毛藻的抑制效应最弱。     

夏季城市热场的卫星遥感分析

利用1998年8月4日上海幅TM6图像,经定位、配准、纠正、图像处理、噪声剔除、亮温标定及特征提取等步骤,得出上海市亮温分布场,同时对其热力景观、细部结构及其成因做了分析。实践证明,TM6图像可作为城市热环境质量评价、生态城市规划的背景资料和依据。     

长江口外缺氧区沉积物中氧化还原敏感性元素的"粒控效应"

对长江口外缺氧区及其邻近海域表层沉积物和沉积物岩芯样品的粒度和元素（主要包括氧化还原敏感性元素简称RSE,和典型陆源碎屑元素）进行了分析,并对元素的“粒控效应”进行了深入研究.结果表明,在近岸底层水溶解氧浓度正常海区沉积物中,元素（包括典型陆源碎屑元素和RSE）的分布显示出明显的“粒控效应”,在缺氧区沉积物中,RSE与粒度之间的相关性较差,其分布不受“粒控效应”的制约,而主要受氧化还原环境的影响.另外缺氧区缺氧程度的不同会导致不同的RSE的富集.     

半叶马尾藻多糖对辐射损伤小鼠骨髓细胞集落生成的影响

探讨半叶马尾藻多糖[Sargassum hemiphyllum(Turner)C．Ag．polysaccharides,SHP]对辐射损伤小鼠骨髓细胞集落生成的影响。检测辐射损伤小鼠脾集落生成单位、红细胞集落生成单位、爆裂型红细胞集落生成单位、粒细胞．巨噬细胞集落生成单位、巨核细胞集落生成单位、混合集落生成单位的变化。5Gy7射线照射后小鼠CFU-S,CFU—E,BFU—E和CFU—Mix明显减少,而SHP(20mg／kg-40mg／kg)可以抑制CFU—S,CFU—E,BFU—E和CFU—Mix下降。辐射损伤也可以引起小鼠CFU-GM显著降低,但是,SHP(10mg／kg-40mg／kg)具有拮抗辐射损伤的作用,使CFU-GM增加。单纯照射组小鼠CFU—Meg显著低于正常对照组,SHP(40mg／kg)加照射组小鼠CFU-Meg却显著高于单纯照射组。SHP对辐射损伤小鼠多能干细胞和造血祖细胞具有保护作用。     

典型地貌景观指数的多尺度效应分析 ——以山西省运城市为例

 景观指数作为定量描述景观特征的指数,具有明显的尺度效应。进行景观指数的尺度效应研究,对进一步理解格局与尺度之间的关系具有重要意义。本文以TM影像为基础,选择山西省运城市平原、丘陵、山地及综合地貌4种不同地貌类型,对7个常用景观指数进行了多尺度效应分析。结果表明:不同地形上斑块密度(PD)、景观形状指数(LSI)、结合度(COHESION)3个指数有明显的粒度效应,随粒度的增加呈现逐渐减少的变化趋势;最大斑块指数(LPI)、周长面积比分维数(PAFRAC)、景观聚集度(CONTAG)和Shannon多样性指数(SHDI)4个指数随粒度的增加几乎不发生变化。不同地貌的景观指数随幅度的变化规律比较复杂,景观形状指数(LSI)随幅度的增加呈现逐渐增加的趋势,其余6个指数在较小幅度范围内变化比较复杂,但随着幅度的增大有逐渐趋于平稳的趋势。针对研究区不同地貌类型,其景观指数在不同粒度和幅度下有较大区别,可以根据景观指数值的大小来区分地貌的复杂程度。