高密度空间采样地震数据特点分析

中国陆相沉积盆地的地质结构复杂,储层岩性的多变,需要有高精度的勘探方法。高密度空间采样是提高地震勘探精度的一项新技术。本文简要说明了点激发和点接收技术,分析高密度空间采样的野外工作方法,介绍了Gijs j．o．Vermeer提出的对称采样原理,从波场连续性的角度探讨了高密度空间采样技术。重点分析高密度空间采样数据的特点, 即:高密集的初至波有利于近地表结构的调查,可提高静校正的精度;小偏移距、小点距接收增加了浅层的有效覆盖次数,提高浅层反射的成像精度; 对规则噪声可实现无假频采样,室内的噪声分析和噪声压制的精度随着提高;高密度采集使波场连续性增强,使得各种数学变换的精度提高,有利于不同波场的分离。最后指出高密度空间采样地震勘探技术的难点在于室内数据处理,针对海量数据的分析和处理方法还需要进行深入细致的研究工作。     

The formation evaluation tool and its application in offshore China

The Formation Evaluation Tool （FET） introduced in the paper represents a new generation of formation evaluation systems developed and manufactured by China Oilfield Services Limited （COSL）, CNOOC, using a FET technology transfer from Crocker Research, Australia. The system has been applied successfully in the Bohai Sea and South China Sea. For instance, a multilayered oil and water system has been confirmed with the aid of accurate formation pressure tests, even in very thin beds and edge water reservoirs, overcoming the difficulty of determining this kind of oil-water and gas-water contacts. Moreover, the FET pumping and real-time fluid monitoring function allows acquiring a true sample of formation fluid unpolluted by drilling mud which plays an important role in determining the fluid properties of the target stratum and analyzing the fluid component. The principles and purpose of the Formation Evaluation Tool （FET） will be briefly introduced and successful examples of the application of the technology will be described in detail in this paper.     

Flux contribution of coherent structures and its implications for the exchange of energy and matter in a tall spruce canopy

The flux contribution of coherent structures to the total exchange of energy and matter is investigated in a spruce canopy of moderate density in heterogeneous, complex terrain. The study deploys two methods of analysis to estimate the coherent exchange: conditional averages in combination with wavelet analysis, and quadrant analysis. The data were obtained by high-frequency single-point measurements using sonic anemometers and gas analysers at five observation heights above and within the canopy and subcanopy, and represent a period of up to 2.5 months. The study mainly addresses the momentum transfer and exchange of sensible heat throughout the roughness sublayer, while results are provided for the exchange of carbon dioxide and water vapour above the canopy. The magnitude of the flux contribution of coherent structures largely depends on the method of analysis, and it is demonstrated that these differences are attributed to differences in the sampling strategy between the two methods. Despite the differences, relational properties such as sweep and ejection ratios and the variation of the flux contribution with height were in agreement for both methods. The sweep phase of coherent structures is the dominant process close to and within the canopy, whereas the ejections gain importance with increasing distance to the canopy. The efficiency of the coherent exchange in transporting scalars exceeds that for momentum by a factor of two. The occurrence of coherent structures results in a flux error less than 4% for the eddy-covariance method. Based on the physical processes identified from the analysis of the ejection and sweep phases along the vertical profile in the roughness sublayer, a classification scheme for the identification of exchange regimes is developed. This scheme allows one to estimate the region of the canopy participating in the exchange of energy and matter with the above-canopy air under varying environmental conditions.     

乌鲁木齐河流域地下水水位监测网设计

文章阐述了乌鲁木齐河流域区域地下水水位监测网的优化设计。基于ARCGIS技术,运用水文地质学方法在叠加合成地下水动态类型分区图的基础上优化设计了区域地下水水位监测网密度;采用时间序列分析方法确定了地下水水位监测频率。首期施工安装了11个新的长期专门监测孔;对73个现有监测孔进行了维修并安装了孔口保护装置,安装了28套水位自动监测仪,初步实现了地下水水位的自动监测。     

Do stratocumulus clouds detrain? FIRE I data revisited

Analyses of aircraft observations of the stratocumulus-topped boundary layer during the First ISCCP (International Satellite Cloud Climatology Project) Regional Experiment (FIRE I) show the frequent presence of clear, but relatively moist, air patches near the stratocumulus cloud-top interface. A conditional sampling of measurements in these clear air patches shows that their thermodynamic properties do more resemble boundary-layer air characteristics than those of free troposphere air. From an aircraft leg through cloud tops it is demonstrated that turbulent mixing across the cloud-top interface can lead to the local dissipation of the cloud top. Analogous to the terminology used for shallow cumulus parameterizations this process can be considered as detrainment, with which we mean that after a mixing event across the cloud-top boundaries, mixed unsaturated parcels become part of the clear environment of the cloud.     

采样过程和模数转换对记录的影响及“真实地面运动”获取——地震学上用的数字信号处理的基本原理和实例(讲座3)

通过采样过程和模数转换对记录影响的分析,讨论了数字地震仪记录的动态范围,以及如何使用谱分析方法去除仪器对最终记录的影响,以便获取“真实地面运动”的近似。     

Analysis of Astex-Stratocumulus Observational Data Using a Mass-Flux Approach

A mass-flux approach is applied to observational data obtained in a convective boundary layer topped with stratocumulus clouds. The observational data were obtained from aircraft measurements during the Atlantic Stratocumulus Transition Experiment (ASTEX). A conditional sampling method is used to calculate average updraft and downdraft values. The vertical fluxes calculated with the mass-flux approach are found to be proportional to the real (measured) fluxes, with a proportionality factor being about 0.6. This value is predicted by theory for two variables having a joint Gaussian distribution function; proportionality factor = 2^-1 0.637. The horizontal fractional entrainment and detrainment rates calculated from the data ( 1–2 × 10^-2 m^-1) are an order of magnitude higher than the rates obtained by large eddy simulations for cumulus convection ( 2–3 × 10^-3 m^-1) and two orders of magnitude higher than those used in modelling cumulus convection with a mass-flux scheme in an operational weather forecast model ( 3 × 10^-4 m^-1). A numerical mass-flux model for the thermodynamics was developed and showed that results are in good agreement when compared with measured profiles of the liquid water content.     

Efficiency verification of a horizontal flow barrier via flowmeter tests and multilevel sampling

The remediation strategy for an industrial site located in a coastal area involves a pump and treat system and a horizontal flow barrier (HFB) penetrating the main aquifer. To validate the groundwater flow conceptual model and to verify the efficiency of the remediation systems, we carried out piezometric measurements, slug tests, pumping tests, flowmeter tests and multilevel sampling. Flowmeter tests are used to infer vertical groundwater flow directions, and base exchange index is used to infer horizontal flow directions at a metric scale. The selected wells are located both upstream and downstream of the HFB. The installation of the HFB produced constraints to the groundwater flow. A stagnant zone of contaminated freshwater floating over the salt wedge in the upper portion of the aquifer is detected downstream of the HFB. This study confirms that the adopted remediation system is efficiently working in the area upstream of the HFB and even downstream in the bottom part of the aquifer. At the same time, it has also confirmed that hot spots are still present in stagnant zones located downstream of the HFB in the upper part of the aquifer, requiring a different approach to accomplish remediation targets. The integrated approach for flow quantification used in this study allows to discriminate the direction and the magnitude of groundwater fluxes near an HFB in a coastal aquifer. Copyright © 2012 John Wiley & Sons, Ltd.     

Combined use of spot samples and continuous integrated sampling in a study of storm runoff from a lowland catchment in the south of England

We have used two different sampling techniques to study the geochemical response of a small lowland rural catchment to episodic storm runoff. The first method involves traditional daily spot sampling and has been used to develop a standard end‐member mixing analysis (EMMA) of the relative contributions of ground water flow and surface runoff to the total stream flow. The second method utilizes a continuous sampling device, powered by an osmotic pump, to produce an integrated 24‐h sample of the stream flow. When combined with the EMMA results from the spot samples, analyses of the integrated samples reveal the presence of a third component that makes a significant contribution to the dissolved NO₃, Ca and K export from the catchment during the rising limb of the hydrographic profile of a storm event following a prolonged dry period. The storm occurred in the middle of the night, so that the response of the stream chemistry was not captured by the daily samples. We hypothesize that this third component is derived from the flushing of stored soil water that contains the geochemical signature of decaying vegetation. Copyright © 2011 John Wiley & Sons, Ltd.     

Composite suspended sediment particles in river systems: their incidence,dynamics and physical characteristics

Most of the existing data on the effective particle size characteristics of fluvial suspended sediment derive from instantaneous sampling methods that may not be representative of the overall suspended sediment loads. This presents difficulties when there is a need to incorporate effective particle size data into numerical models of floodplain sedimentation and sediment‐associated contaminant transfer. We have used a field‐based water elutriation apparatus (WEA) to assemble a large (36 flood) database on the time‐integrated nature of the effective and absolute particle size characteristics of suspended sediment in four subcatchments of the River Exe basin of southwest England. These catchments encompass a wide range of terrains and fluvial environments that are broadly representative of much of the UK and temperate, low relief northwest Europe. The WEA provides important data on the physical characteristics of composite particles that are not attainable using other methods. This dataset has allowed, for the first time, detailed interbasin comparisons of the time‐integrated particle size characteristics of suspended sediment and reliable estimates of the contribution of five effective size classes to the mean annual suspended sediment load of the study catchments. The suspended sediment load of each river is dominated by composite rather than primary particles, with, for example, almost 60% (by mass) of the sediment load of the River Exe at Thorverton transported as composite particles > 16 µm in size. All the effective size classes contain significant clay components. A key outcome of this study is the recognition that each catchment has a distinctive time‐integrated effective particle size signature. In addition, the time‐integrated effective particle size characteristics of the suspended loads in each of the catchments display much greater spatial variability than the equivalent absolute particle size distributions. This indicates that the processes producing composite particles vary significantly between these catchments, and this has important implications for our understanding of the dynamics of suspended sediment properties. Copyright © 2007 John Wiley & Sons, Ltd.