Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.     

GIS新引擎——“真图”数据解决方案

提出了一种基于移动测量系统技术的"真图"数据解决方案。一方面极大地丰富了GIS数据源,另一方面通过相应的真图影像数据管理软件及开发包扩展GIS功能,为各行业应用提供了地理信息数据解决方案。     

基于Web 2.0的GIS模型共享平台研究

本文提出了基于Web 2.0建立GIS模型共享平台的设想,以期建立一个能够让用户创造模型和组织数据的GIS模型共享平台,并基于模型共享平台建立原型系统。借鉴了Web 2.0的数据自组织形式,按标签分类的方式让用户参与元数据组织,以适应各个领域用户的需求。同时为改变以往被动等待用户查询信息的方式,原型系统按RSS标准主动发布有价值信息,用户可以在第一时间获知系统更新。原型系统功能用网络服务封装,并提供客户端程序,提高了系统适用范围。原型系统的建立,证实了构建基于Web 2.0的GIS模型共享平台的价值和可行性。     

三种电离层延迟多频修正算法的比较

电离层延迟多频修正算法在修正电离层延迟的同时会放大观测噪声等伪距误差的影响。分析了电离层延迟双频修正、三频一阶修正和三频二阶修正三种修正算法及观测噪声的影响。以Galileo系统的四个载波频率为例,对不同频率组合下三种修正算法进行了比较。结果表明电离层延迟多频修正中,并不是观测量的频点数越多或修正掉的高阶项越多修正精度越高,还与观测伪距噪声的大小以及采用的修正方法有关。为多频测距系统的电离层延迟修正算法和最佳频率组合设计提供了一种可行的分析方法。     

基于遗传算法的空基导航信号增强平台组网优化方法研究

根据空基导航信号增强平台的工作原理设计了组网优化评价指标;然后简单介绍了遗传算法的基本原理,对空基增强平台的空间位置进行了二进制编码;最后采用通用的遗传算法对空基导航信号增强平台空间分布进行优化搜索。仿真实验结果证明该算法能够对空基导航信号增强平台进行有效布置,覆盖范围内导航服务误差分布合理,并且能够根据实际要求对空基平台进行优化调整。     

利用钻芯孔检测灌注桩钢筋笼长度的方法

根据充电法原理,结合模型桩试验,分析了钢筋笼周围的充电电场特征,结果表明钢筋笼的底端对应于电位梯度曲线的极小值点及电位曲线的拐点。以此研究结果为基础,提出了利用钻芯孔来检测成桩后钢筋笼长度的方法。某桥的应用表明,该方法简便、实用、可靠。     

多孔紊动射流的数值模拟与实验研究进展

多孔射流作为流体运动的一种重要类型,在工程中具有非常广泛的用途。由于多孔射流各股水流之间的卷吸和掺混的存在,增加了流场的复杂性。长期以来研究人员从理论分析、实验测量和数值模拟方面对多孔紊动射流进行了大量的研究工作,目前已经认识了流场中的许多流动特性和流动机理。从数值模拟和实验研究两个方面,比较分析了国内外多孔紊动射流的研究现状和研究结果,评述了不同湍流模型以及不同实验测量方法对紊动射流的预测能力,讨论了存在的问题并对该领域的研究方向进行了展望。     

Low multipath antennas for GNSS-based attitude determination systems applied to high-altitude platforms

High-altitude platforms (HAPs) are a flexible and attractive technology for providing innovative wireless services. These aerial platforms can be successfully employed for mobile or broadband communications and for disaster monitoring or response. However, one of the open issues is whether HAP stations can provide reliable services without temporal outages owing to stratospheric winds that can cause positional and attitude instabilities thus affecting the communication system operation. To counteract this issue, one possible solution is to use reconfigurable antennas whose pointing direction can be adjusted depending on the platform spatial orientation. However, this would require real-time three-axial attitude data. As a possible solution, this paper will review the potential of GNSS-based attitude determination systems with reference to HAP stations. In particular, it will be shown how the use of a particular class of low multipath and lightweight antennas can provide a high degree of accuracy without altering the avionic ballast.     

多因子影响的地图居民地自动聚群与综合研究

提出了地图综合目的的居民地聚群需要遵循Gestalt的邻近性、相似性和方向性原则,描述居民地结构、形态及其关系需要6个因子,即居民地间的距离、可视区域面积、大小相似度、形状相似度、方向关系、居民地内部方向;进而运用这些原则和因子,给出了居民地的自动聚群和综合方法.     

双作用水泵泡沫增压装置应用及前景分析

双作用水泵泡沫增压装置是利用双缸双作用水泵的高压能力将低压空气和泡沫液二次增压至水泵的额定压力,并混合产生泡沫.采用BWZ-1200双作用水泵泡沫增压装置在北京地区深度为1 000 m以下的地热井钻探中,成功地克服了地热井钻进中井内漏失和洗井的难题;在极度缺水的宁夏南部地区水井钻探中,采用BWZ-1100双作用水泵泡沫增压装置解决了水井孔内严重漏失和施工用水的难题.该装置可代替价格昂贵的高压空压机实现气举反循环钻探,应用于深地热井、深水井和油气井钻探.