黄河银川平原段河岸摆动速率变化及其影响因素(英文)

It is important to examine the lateral shift rate variation of river banks in different periods. One of the challenges in this regard is how to obtain the shift rate of river banks, as gauging stations are deficient for the study of river reaches. The present study selected the Yinchuan Plain reach of the Yellow River with a length of 196 km as a case study, and searched each point of intersection of 153 cross-sections(interval between two adjacent cross-sections was 1.3 km) and river banks in 1975, 1990, 2010 and 2011, which were plotted according to remote sensing images in those years. Then the shift rates for the points of intersection during 1975–1990, 1990–2010 and 2010–2011 were calculated, as well as the average shift rates for different sections and different periods. The results show that the left bank of the river reach shifts mostly to the right, with the average shift rates being 36.5 m/a, 27.8 m/a and 61.5 m/a in the three periods, respectively. Contemporarily, the right bank shifts mostly to the right in the first period, while it shifts to the left in the second and third periods, with the average shift rates being 31.7 m/a, 23.1 m/a and 50.8 m/a in the three periods, respectively. The average shift rates for the left and right banks during the period 1975–2011 are 22.3 m/a and 14.8 m/a, respectively. The bank shift rates for sections A, B and C are different. The shift rate ratio of the left bank in the three sections is 1:7.6:4.6 for shift to the left and 1:1.7:3.8 for shift to the right, while that of the right bank is 1:1.8:1.2 for shift to the left and 1:5.6:17.7 for shift to the right during the period 1975–2011. Obviously, the average shift rate is the least in section A, while it is maximum in section B for shift to the left and in section C for shift to the right. The temporal variation of the shift rate is influenced by human activities, while the spatial variation is controlled by the local difference in bank materials.     

基于RTK-GPS技术的干热河谷冲沟沟头形态特征

采用高精度实时动态差分GPS(以下简称RTK-GPS)技术对干热河谷冲沟进行野外调查,获取36个不同活跃度类型沟头的形态参数,研究不同活跃度类型之间沟头的形态特征差异,并分析集水区、沟床植被盖度与形态特征之间的关系。结果表明:1.沟头不同活跃度类型之间,其跌坎高差、沟床比降差异最为显著,可作为沟头活跃度类型野外判别的主要参考指标;沟壁坡度、宽-深比等的差异较为显著,亦可在一定程度上表征沟头活跃程度。2.沟床植被盖度与各形态特征参数的相关性显著,表明沟床植被盖度可作为形态参数的综合替代性指标。同一活跃度类型的沟头,其跌坎高差、沟床比降等与沟床植被盖度呈极显著负相关关系,说明随着沟床植被盖度的增加(或减小),跌坎高差、沟床比降均呈减小(或增加)趋势。3.集水区植被盖度与各形态特征参数的关系不显著,表明干热河谷集水区植被盖度对沟头发育的贡献有限。     

Effects of Nitrogen Addition on Plant Functional Traits in Freshwater Wetland of Sanjiang Plain,Northeast China

To clarify the responses of plant functional traits to nitrogen（N） enrichment, we investigated the whole-plant traits（plant height and aboveground biomass）, leaf morphological（specific leaf area（SLA） and leaf dry mass content（LDMC）） and chemical traits（leaf N concentration（LNC） and leaf phosphorus（P） concentration（LPC）） of Deyeuxia angustifolia and Glyceria spiculosa following seven consecutive years of N addition at four rates（0 g N/（m^2·yr）, 6 g N/（m^2·yr）, 12 g N/（m^2·yr） and 24 g N/（m^2·yr）） in a freshwater marsh in the Sanjiang Plain, Northeast China. The results showed that, for both D. angustifolia and G. spiculosa, N addition generally increased plant height, leaf, stem and total aboveground biomass, but did not cause changes in SLA and LDMC. Moreover, increased N availability caused an increase in LNC, and did not affect LPC. Thus, N addition decreased leaf C∶N ratio, but caused an increase in leaf N∶P ratio, and did not affect leaf C∶P ratio. Our results suggest that, in the mid-term, elevated N loading does not alter leaf morphological traits, but causes substantial changes in whole-plant traits and leaf chemical traits in temperate freshwater wetlands. These may help to better understand the effects of N enrichment on plant functional traits and thus ecosystem structure and functioning in freshwater wetlands.     

雷州马尾藻Sargassum leizhouense(Fucales,Phaeophyta)形态结构及分类研究

本研究通过对产于雷州半岛的雷州马尾藻(Sargassum leizhouense)形态结构进行研究,结合形态解剖、分类学特征等观察,比较了与同类组中其他3种马尾藻的特征差异,澄清了其分类地位,并修改了雷州马尾藻的检索表。结果表明,雷州马尾藻属于马尾藻属、真马尾藻亚属、叶托混生组、拟叶托混生亚组;尽管雷州马尾藻与该组的瓦氏马尾藻(S.vachellianum)、鳞茎马尾藻(S.bulbiferum)及滑托组的亨氏马尾藻(S.henslowianum)形态有许多相似之处,但其与上述3种马尾藻的主要差异在于球芽及分裂叶的有无。本研究不仅修改了雷州马尾藻分类地位,也为将来开展该马尾藻的人工繁育及养殖、加工提供帮助。     

山东荣成天鹅湖大叶藻形态和生长的季节性变化研究

2012年8月至2013年7月,作者逐月对天鹅湖大叶藻(Zostera marina L.)的形态特征、植株密度、生物量和生产力进行了监测。结果表明,大叶藻周年株高最高值和最低值分别出现在7月和1月;叶鞘高度、叶鞘宽度和叶宽的最高值均出现在7月,叶鞘高度最低值出现在1月,叶鞘宽度和叶宽最低值均出现在2月;大叶藻顶枝、侧枝和花枝的周年密度最大值分别出现在6月、4月和5月,最小值分别出现在1月、8月和7月;单株生物量和地上部分生物量最大值均出现在7月,地下部分出现在10月,而单株生物量和地上部分生物量最小值均出现在1月,地下部分生物量最小值出现在3月;单株地上和地下生产力最大值均出现在6月,最小值则分别出现在1月和2月。分析显示,大叶藻在冬季由于水温较低导致生长缓慢,且植株较小,在春季随水温上升,生长开始加快。水温在夏初达到大叶藻的最适生长水温,大叶藻的生物量和初级生产力达到最高值,而夏末和初秋由于水温过高导致大叶藻个体生物量、密度和初级生产力开始降低。这种季节性变化与水温的季节性变化密切相关。     

Applications of wavelet analysis in differential propagation phase shift data de-noising

Using numerical simulation data of the forward differential propagation shift （ΦDP） of polarimetric radar,the principle and performing steps of noise reduction by wavelet analysis are introduced in detail.Profiting from the multiscale analysis,various types of noises can be identified according to their characteristics in different scales,and suppressed in different resolutions by a penalty threshold strategy through which a fixed threshold value is applied,a default threshold strategy through which the threshold value is determined by the noise intensity,or a ΦDP penalty threshold strategy through which a special value is designed for ΦDP de-noising.Then,a hard-or soft-threshold function,depending on the de-noising purpose,is selected to reconstruct the signal.Combining the three noise suppression strategies and the two signal reconstruction functions,and without loss of generality,two schemes are presented to verify the de-noising effect by dbN wavelets：（1） the penalty threshold strategy with the soft threshold function scheme （PSS）; （2） the ΦDP penalty threshold strategy with the soft threshold function scheme （PPSS）.Furthermore,the wavelet de-noising is compared with the mean,median,Kalman,and finite impulse response （FIR） methods with simulation data and two actual cases.The results suggest that both of the two schemes perform well,especially when ΦDP data are simultaneously polluted by various scales and types of noises.A slight difference is that the PSS method can retain more detail,and the PPSS can smooth the signal more successfully.     

The impact of anoxia on pelagic macrofauna during the Toarcian Oceanic Anoxic Event (Early Jurassic)

Extreme environmental change during the Toarcian Oceanic Anoxic Event had widespread impacts on marine biota. This study provides new evidence, from the Yorkshire coast sections, UK, that the event was associated with periods of elevated fish and ammonite mortality. Using a synthesis of pelagic macrofaunal changes, benthic macrofaunal data and geochemical proxies we show that there are stratigraphical correlations between: (1) pelagic macrofaunal ranges and abundance, (2) benthic macrofaunal abundance, and (3) geochemical proxies that indicate deoxygenation. We identify eight stratigraphical intervals of differing character. Results suggest two major phases of relatively persistent deoxygenation with photic zone euxinia. The cyclostratigraphic timescale indicates that each phase lasted at least tens of thousands of years. Belemnite migration during the event probably resulted from increased seawater temperatures and low food supply similar to that observed for many marine taxa, including squid, within the present-day oceans.     

庐枞盆地泥河铁矿床成矿岩体三维形态学分析及找矿指标研究

泥河铁矿床位于长江中下游成矿带内庐枞盆地的西北部,属玢岩型铁矿床,前人对该矿床的基础地质研究已有一定成果,积累了大量的数据资料,表明泥河铁矿床的形成与辉石闪长玢岩顶面形态关系密切。本文选择泥河铁矿床闪长玢岩为研究对象,以钻孔资料为依据,采用离散光滑插值法建立成矿岩体的精细三维模型,重现了闪长玢岩体的形态特征,将三维模型离散化后提取岩体顶面并通过三维形态分析方法进行数值分析,提取了岩体表面的隆起、凹陷形态,并与已知矿体进行对比,验证了该矿床成矿岩体隆起形态与矿体位置的对应关系。本文通过多次实验确定最佳表达的滑动窗口尺寸和与成矿岩体形态有关的找矿指标,结果证明利用10×10个单元的滑动窗口可以识别80%以上矿体。本文对三维成矿预测中三维空间分析方法进行探索,证明成矿岩体三维形态分析方法的有效性,这一方法可直接应用于与泥河铁矿床类似的玢岩型铁矿床三维成矿预测中。     

利用小波变换压制静态效应的方法

利用有限元大地电磁二维正演程序模拟了二层大地低阻静态效应的地电模型,研究了静态效应产生的原理及其影响,并利用小波变换方法对静态效应进行压制,相对于其他常规空间滤波法来说,取得了较好的压制效果,证实了小波变换方法在压制静态效应当中的可行性和有效性。用小波变换方法对某工区实测EH-4音频大地电磁资料数据进行分析、处理,从数学上识别和判断了静态效应,在较好地压制静态效应的同时又能较好地突出地层原本的地质异常。     

世界主要国家及地区制造业GVC地位时空格局演化——基于TiVA数据库的研究

在经济全球化和全球产业转移不断深化的背景下,不同国家在国际分工生产中所处的全球价值链（GVC）地位不同。一国能否从参与全球化中获益,日益取决于能否成功融入全球价值链,并在某一特定环节占据竞争优势。明确全球制造业大国的GVC地位,认识其国际分工及影响规律具有重要的理论价值和现实意义。利用TiVA数据库,测算世界59个国家及地区1995—2014年制造业GVC地位指数并分析其演变特征。结果显示：全球价值链地位较高的国家及地区主要分布在美洲、欧洲及东亚,位于中亚、西亚、非洲和大洋洲的国家参与极少,近年来高附加值生产环节呈现不断向少数国家及地区集中的趋势。大部分国家及地区劳动密集型行业地位较高,技术密集型地位指数较低,技术密集型行业的贸易附加值主要被少数掌握核心技术和价值链两端的国家及地区获得。从细分行业上看,核心国家及地区均呈现了分阶段演化的特征。在空间相关关系上,制造业整体和劳动密集型行业GVC地位指数均呈显著的空间集聚分布特征,且集聚程度先降低后升高,资本密集型行业GVC地位指数空间集聚分布最为显著且集聚程度不断增强,而技术密集型行业GVC地位指数空间集聚效应不明显。从空间集聚形式来看,大部分国家及地区GVC地位指数较低,贸易附加值被少数GVC地位较高的国家及地区获得。此外,外商直接投资、资本投入会抑制一国GVC地位的提升,科研创新能力对于一国GVC地位的提升起促进作用,出口规模与一国GVC地位呈明显的正向关系,行政效能对于一国GVC地位无明显影响,但是行政效能会促进外商直接投资对于GVC地位的抑制作用。