TMI、AMSR-E全球海表温度与Argo近海表温度的比较

本文将TMI（Tropical Rainfall Measuring Mission （TRMM）Microwave Imager）和AMSR-E（Advanced Microwave Scanning Radiometer for the Earth Observing System）卫星观测的全球海表温度与Argo浮标观测的近海表温度进行了比较。并检验了影响海温变化的因素,包括风速、水汽含量、液态云和地理位置。结果显示,TMI、AMSR-E海表温度与Argo近海表温度均明显相关。在低风速时,TMI、AMSR-E海表温度整体比Argo近海表温度高。在低风速时,TMI比AMSR-E海表温度更接近Argo近海表温度,但TMI海表温度在高纬可能没有经过良好校正。温度差异显示,在低水汽含量时,TMI和AMSR-E海表温度显示出暖的差异,代表TMI和AMSR-E海表温度在高纬均没有经过良好校正。黑潮延伸区的海表温度变化要比海潮区明显。春季在黑潮延伸区,卫星观测的海表温度与Argo近海表温度差异较小。在低风速时,TMI和AMSR-E海表温度均经过了良好校正,而TMI比AMSR-E效果更好。     

Fluid sources and stable isotope signatures in authigenic carbonates from the Northern Apennines,Italy

Authigenic carbonates are frequently associated with methane cold-seep systems, which extensively occur in various geologic settings worldwide. Of interest is the relation between the fluids involved in their formation and the isotopic signals recorded in the carbonate cements. Along the Northern Apennines foothills (Italy), hydrocarbons and connate waters still seeping nowadays are believed to be the primary sources for the formation of fossil authigenic carbonate found in Plio-Pleistocene marine sediments. Four selected outcrops of dolomitic authigenic carbonates were analysed to compare signature of seeping fluids with fractionation of stable carbon and oxygen isotopes recorded in the carbonate.Along the foothills, deep methane-rich fluids spontaneously rise to the surface through mud volcanoes or are exploited in wells drilled nearby to the fossil Plio-Pleistocene authigenic carbonates. The plumbing system providing fluids to present-day cold seeps was structurally achieved in Late Miocene and Plio-Pleistocene. δ¹³C values of methane, which vary from −51.9 to −43.0‰ VPDB, indicate that gas composition from the deep hydrocarbon reservoirs is relatively uniform along the foothills. On the contrary, δ¹³C in fossil authigenic carbonates strongly varies among different areas and also within the same outcrop.The different carbon sources that fed the investigated carbonates were identified and include: thermogenic methane from the deep Miocene reservoirs, ¹³C-enriched CO₂ derived from secondary methanogenesis and microbial methane from Pliocene successions buried in the Po Plain. The δ¹³C variability documented among samples from a single outcrop testifies that the authigenic carbonates might represent a record of varying biogeochemical processes in the hydrocarbon reservoirs. The sources of stable oxygen isotopes in authigenic carbonates are often ascribed to marine water. Oxygen isotopic fractionation in the dolomite cements indicates that marine pore water couldn't be the sole source of oxygen. δ¹⁸O values provide a preliminary evidence that connate waters had a role in the carbonates precipitation. The concomitant occurrence of active cold seepages and fossil record of former plumbing systems suggests that generation and migration of hydrocarbons are long-lasting and very effective processes along the Northern Apennines foothills.     

New insights into the carbonate karstic fault system and reservoir formation in the Southern Tahe area of the Tarim Basin

As worldwide hydrocarbon exploration has extended from shallowly to deeply buried strata, reservoir quality has attracted substantial and persistent interest in petroleum geology. In particular, deeply buried strata (>5500 m) in the Tarim Basin have attracted considerable attention because carbonate reservoirs that have experienced fracture or dissolution have also been shown to demonstrate considerable hydrocarbon potential. Therefore, it is necessary to determine how these reservoirs are developed and distributed in detail from both scientific and practical standpoints.In this paper, we address this issue using a case study in the southern Tahe area, which is contained within the largest Palaeozoic marine oilfield in China. In the northern Tahe area, mega-paleokarst systems developed in the Ordovician strata; however, the reservoir quality in the southern part of the Tahe area is relatively poor because it is covered by insoluble formations during karstification. Observations of cores and analyses of images of well logging demonstrate that these reservoirs are dominated by caves, vugs and fractures that have developed near faults. We speculate that the faults penetrating insoluble formations represent the main dissolution passages that originally developed these karstic fault systems. Additionally, we analyse a series of outcrops, seismic data, and structures to characterize the spatial geometry of these major faults and their surrounding fractures in detail. Most of these are strike-slip faults, and their subsequent reservoirs can be divided into three categories based on their development, including dendritic, sandwich and slab reservoirs. Recent studies demonstrate that karstic fault reservoirs are most common traps in the study area. Although various types of carbonate karstic fault reservoirs are represented in this region, the dendritic karstic fault reservoir is the most hydrocarbon-rich.Guided by these initial results, 108 wells were drilled from 2013 to 2014, producing 485 thousand tons of oil and yielding success ratios greater than 89%. The average production of dendritic reservoirs is 37.4 tons per day (t/d), while those of sandwich and slab types are 20.2 t/d and 14.0 t/d, respectively. These results represent significant references for future hydrocarbon exploration and the development of similar deeply buried karstic fault reservoirs in the Tarim Basin and elsewhere.     

Sedimentary control on the formation of a multi-superimposed gas system in the development of key layers in the sequence framework

Based on core observations, well logs and test results of siderite-bearing mudstone from the Benxi Formation to the Member 2 of the Shanxi Formations in the Linxing block, northeastern Ordos Basin, a logging identification model for siderite-bearing mudstone (key layer) was established. The porosity characteristics and sealing property were quantitatively evaluated by logging data. Sedimentary control on the formation of multi-superimposed gas-bearing system in the development of key layers in the sequence framework was also discussed. The results showed that the siderite-bearing mudstone has obvious logging response characteristics, e.g., high photoelectric absorption cross-section index (PE), high density (DEN), high amplitude natural gamma ray (GR), low acoustic (AC), low resistivity (M2RX) and low neutron porosity (CNCF). The quantitatively evaluated results of the porosity characteristics and sealing property for the key layer showed that the key layer has the characteristics of low porosity (with an average of 1.20 percent), low permeability (with an average of 2.29 × 10⁻⁸μm²), and high breakthrough pressure (with an average of 12.32 MPa) in the study area. This layer acts as an impermeable gas barrier in a multi-superimposed gas system. The results also indicated that the material composition of the multi-superimposed gas-bearing system can be established by the sequence stratigraphic framework. The sedimentary evolution results in a cyclic rhythm of material composition vertically. The spatial distribution of the corresponding transgressive event layer near the maximum flooding surface (MFS) in the sequence framework restricts the spatial distribution of the key layer with high breakthrough pressure and low porosity, which constitutes the gas-bearing system boundary. The siderite-bearing mudstone formed near the MFS in the second-order sequence and constitutes a stable comparison of the first-order gas-bearing system boundary, which has a wide range of regional distribution and stable thickness. The siderite-bearing mudstone formed near the MFS in the third-order sequence is often incompletely preserved due to the late (underwater) diversion channel erosion and cutting. This layer forms the coal-bearing reservoirs, which we termed as a second-order gas-bearing system in adjacent third-order sequences to form a uniform gas-bearing system.     

Assistance networks in seafood trade – A means to assess benefit distribution in small-scale fisheries

This article addresses the connections between value chain actors in the tropical-marine small-scale fisheries of Zanzibar, Tanzania, to contribute to a better understanding of the fisher-trader link and how connections in general might feed into livelihood security. A sample of 168 fishers and 130 traders was taken across 8 sites through questionnaires and observations. The small-scale fishery system is mapped using a value chain framework both traditionally and from a less economic point of view where the assistance-exchange networks between fishery actors add another layer of complexity. Auxiliary actors previously disregarded emerge from the latter method thus shedding light on the poorly understood distribution of benefits from seafood trade. Female actors participate quite differently, relative to males in the market system, detached from high-value links such as the tourist industry, and access to predetermined or secured sales deals. Data shows that the fisher-trader link is not as one-sided as previously presented. In fact it has a more symbiotic exchange deeply nested in a broader trading and social system. Expanding the analysis from this link by taking a further step downstream highlights traders’ own sales arrangements and the social pressures they are under in realizing them. A complex picture, inclusive of diversified perspectives, on interactions in the market place is presented, as well as a reflection on the remaining critical question: how to integrate this type of data into decisions about future fisheries governance.     

系缆损伤对绷紧式系泊系统动力响应的影响

探究合成纤维系缆损伤对绷紧式系泊系统响应的影响,具有重要的工程意义。通过高强聚乙烯(HMPE)缆绳损伤动刚度实验,获得其动刚度随损伤的演变规律。在数值计算上,借鉴并合理简化了前人提出的动刚度经验公式,通过处理实验结果确定动刚度经验公式的参数并进行验证。在此基础上,以一座采用高强聚乙烯缆绳为主体系缆的FPSO为例,将所得动刚度经验公式导入系泊分析软件,结合水动力分析,计算得到在相同海洋环境中,系缆发生不同程度损伤时,各系缆张力和平台偏移响应的结果。通过处理、分析所得的计算结果,获得合成纤维缆绳损伤演变对绷紧式系泊系统响应的影响规律,并据此为系缆更换提供了建议。这些成果既有利于把握绷紧式系泊系统的非线性动力响应,也对安全、经济、合理地运用合成纤维系缆具有重要意义。     

Multibeam Echo Sounders-IMU Automatic Boresight Calibration on Natural Surfaces

ABSTRACT

This paper details a new boresight calibration method for multibeam echo sounder systems This method is based on an automatic data selection algorithm, followed by a boresight least squares adjustment This method, called MIBAC (MultiBeam-IMU Boresight Automatic Calibration), takes in input overlapping survey strips following a simple line pattern over a regular slope. We first construct a boresight error observability criterion, used to select automatically the most sensitive soundings to boresight errors. From these soundings, we perform a 3D adjustment of the boresight angle, thus taking into account the coupling between angles. From a statistical analysis of the adjustment results, we derive the boresight angle precision. Numerical results obtained with four different multibeam echo sounder systems are presented and compared to those of a patch test calibration method. Finally, we demonstrate the performances of MIBAC through a standard deviation along the surface normal approach computed by principal component analysis.     

深水半潜式平台锚链倾角监测的自容式传感器的设计

深水半潜式平台系泊锚链的倾角变化是评价平台系泊状态与锚链受力的重要指标,是半潜式平台重要的监测内容。目前,深水锚链的测量主要是采用自容式的传感器,针对其水下长时间测量的应用特点,要求它的设计必须具有低功耗、高可靠性、大存储量、体积小、防水耐压等指标。根据我国南海流花平台的锚链监测需要,设计与制作了专用的水下自容式倾角传感器,并在实际应用中进行了检验。     

垂荡式波浪能装置运动模型数值分析

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。