新型激光雷达浮标运动响应特性数值研究

以新型激光雷达浮标系统为研究对象,基于ANSYS/AQWA开展了激光雷达浮标系统运动响应特性数值研究,研究了浮标吃水深度、形状参数对于激光雷达浮标运动响应的影响规律,分析了附加质量、辐射阻尼、运动响应RAO及一阶、二阶波浪力等水动力参数。采用时域分析方法对不同风浪流荷载入射角度下的激光雷达浮标锚泊系统张力特性进行了计算分析。研究结果表明:随着浮标吃水深度的增加,浮标纵荡方向响应无明显变化,垂荡响应显著增大;随着浮标底部圆台直径的增大,浮标纵荡方向响应变化较小,而圆柱形浮标垂荡运动响应显著大于圆台形浮标;当浮标系泊锚链发生松弛—张紧状态变化时易出现极端张力,且极端张力出现的幅值和频率随有效波高的增大和谱峰周期的减小而增大。     

基于并行计算的海洋平台谱分析疲劳筛选技术研究

为了得到海洋平台疲劳失效风险最大的焊接区域,提出了以有限元网格单元应力为基础的谱分析筛选方法,并开发了程序。程序采用并行计算架构,单次完成数万个单元的累积损伤度/疲劳寿命计算,并通过有限元软件以云图方式显示疲劳寿命。采用该程序计算双浮筒半潜式平台的疲劳寿命。结果表明,该型平台疲劳失效风险较高的区域为立柱与上壳体下浮体连接对角线转角区域、浮筒中纵舱壁与立柱连接区域。并行计算方法的引入,大大缩减疲劳损伤度计算的分析时间,采用22核心的CPU,时间缩短为原来的1/18.5,17小时完成全平台外壳单元谱分析计算。     

BDS卫星失效对区域定位精度的影响评估

基于STK软件实现了2016-09 BDS系统星座结构的仿真,并选取可见卫星数、DOP值、系统可用性作为评估BDS卫星星座设计结构的指标,分析单颗与全部倾斜轨道卫星（IGSO）、地球静止轨道卫星（GEO）失效后对我国大陆地区BDS系统可用性的影响。结果表明,IGSO4卫星与GEO5卫星失效后对BDS在区域的定位性能影响较大,失效后的GDOP值分别为1.98、2.16。取BDS卫星正常运行时区域平均GDOP最大值(S=2.60)作为系统可用性阈值时,系统可用性分别降低了1.79%、32.63%;阈值取2S(5.20)、3S(7.80)、4S(10.40)、5S(13.00)时,系统可用性均可达100.00%。GEO整体失效后BDS系统在高精度定位中仍部分可用,而IGSO整体失效后BDS系统可用性受到大幅度限制。因此,增加在轨备份卫星时需重点考虑GEO5、IGSO4,并适当增加IGSO卫星的数目。     

Fully Coupled Effects of Hull, Mooring and Risers Model in Time Domain Based on An Innovative Deep Draft Multi-Spar

The coupled hull, mooring and riser analysis techniques in time domain are widely recognized as the unique approach to predict the accurate global motions. However, these complex issues have not been perfectly solved due to a large number of nonlinear factors, e.g. forces nonlinearity, mooring nonlinearity, motion nonlinearity and so on. This paper investigates the coupled effects through the numerical uncoupled model, mooring coupled model and fully coupled model accounting mooring and risers based on a novel deep draft multi-spar which is especially designed for deepwater in 2009. The numerical static-offset, free-decay, wind-action tests are executed, and finally three hours simulations are conducted under 100-year return period of GOM conditions involving wave, wind and current actions. The damping contributions, response characteristics and mooring line tensions are emphatically studied.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

岩溶区层状缓倾角岩质边坡变形破坏机制研究

在贵州岩溶区某大型工程台址工程地质环境条件研究基础上,采用地质历史过程机制分析法和数值模拟方法,对岩溶区层状缓倾角岩质边坡变形破坏机制作系统研究,总结出了4种变形破坏机制,即高陡的层状缓倾内边坡(A类坡)主要发生倾倒-崩落或拉裂-崩落破坏,低矮的层状缓倾内边坡(C类坡)则以小规模垮塌为主;缓倾外顺层边坡(B类坡)以滑移-拉裂型顺层滑坡或块状滑坡为主,而复合型边坡(D类坡)多以滑移-拉裂和弯曲-拉裂组合形式发生破坏.     

黄土路堑边坡变形破坏机理的三轴试验研究

通过原状黄土的减压三轴压缩试验,研究了黄土边坡不同深度不同含水量土体的应力-应变关系,并与原状黄土的常规三轴试验结果进行了比较,发现减压三轴试验能合理地模拟和解释开挖卸荷作用下黄土边坡土体的变形与破坏过程。试验结果表明:坡脚开挖卸荷时,黄土边坡中浅层非饱和黄土易出现应变软化或塑性流动,强度较低,易产生较大变形,而深层饱和黄土仅在高围压下发生应变硬化,强度增加,在中低围压时均发生应变软化现象。分析认为黄土边坡特殊的工程地质条件,使得黄土边坡的特定部位在开挖卸荷作用下常形成了不利于土体稳定的含水量和围压组合,导致坡体特定部位的土体变形破坏,进而诱发边坡的变形破坏;开挖卸荷作用下黄土边坡变形破坏的力学机制应为蠕滑-压致拉裂或牵引式滑坡。     

Limit states and failure mechanisms of viscous dampers and the implications for large earthquakes

Fluid viscous dampers are used to control story drifts and member forces in structures during earthquake events. These elements provide satisfactory performance at the design‐level or maximum considered earthquake. However, buildings using fluid viscous dampers have not been subjected to very large earthquakes with intensities greater than the design and maximum considered events. Furthermore, an extensive database of viscous damper performance during large seismic events does not exist. To address these issues, a comprehensive analytical and experimental investigation was conducted to determine the performance of damped structures subjected to large earthquakes. A critical component of this research was the development and verification of a detailed viscous damper mathematical model that incorporates limit states. The development of this model and the laboratory and simulation results conclude good correlation with the new model and the damper limit states and provide superior results compared with the typical damper model when considering near collapse evaluation of structures. Copyright © 2010 John Wiley & Sons, Ltd.     

Dynamic propagation criteria for catastrophic failure in planar landslides

Quantitative assessment of the risk of submarine landslides is an essential part of the design process for offshore oil and gas developments in deep water, beyond the continental shelf. Landslides may be triggered by a reduction in shear strength of subsea sediments over a given zone, caused for example by seismic activity. Simple criteria are then needed to identify critical conditions whereby the zone of weakness could grow catastrophically to cause a landslide. A number of such criteria have been developed over the last decade, based either on ideas drawn from fracture mechanics, or considering the equilibrium of the initial weakened zone and adjacent process zones of gradually softening material. Accounting for the history of the weak zone initiation is critical for derivation of reliable propagation criteria, in particular considering dynamic effects arising from accumulating kinetic energy of the failing material, which will allow the failure to propagate from a smaller initial zone of weakened sediments. Criteria are developed here for planar conditions, taking full account of such dynamic effects, which are shown to be capable of reducing the critical length of the softened zone by 20% or more compared with criteria based on static conditions. A numerical approach is used to solve the governing dynamic equations for the sliding material, the results from which justify assumptions that allow analytical criteria to be developed for the case where the initial softening occurs instantaneously. The effect of more gradual softening is also explored. Copyright © 2016 John Wiley & Sons, Ltd.