The role of Coriolis in sandbank formation due to a headland/island system

Tidal flow past a headland was modelled and the resulting sandbank formation due to bedload transport by eddy systems was examined with particular emphasis on the role of Coriolis. The headland configuration was extended to the more complex case of a headland with a detached island and the role of Coriolis in sandbank formation was again examined. In the headland case, the contribution of Coriolis resulted in the expected change in bed level at the centre of the residual eddies (positive contribution for the cyclonic eddy and negative change for the anticyclonic eddy). In the headland/island case, the role of Coriolis in the resulting bed level change was a function of eddy shedding from the island, defined by the island wake parameter. When eddy shedding occurred, the inclusion of Coriolis had a large magnitude effect on creating flood/ebb sandbank asymmetry. When eddies remained attached to the island, Coriolis had a minor role in the magnitude of this asymmetry.     

基于五种油源的中重度风化溢油的常规鉴定指标的应用效果评估

本文利用采集于我国三大油田的五种原油样品开展了长达210天的溢油风化模拟实验,并依据相对偏差和重复性限数学分析法,进行溢油风化过程分析和诊断比值应用效果评估。研究结果表明:经过210天的风化,溢油鉴定诊断比值发生明显改变;其中来源于萜烷、甾烷和多环芳烃的诊断比值变化率要远低于正构烷烃,可用于中长期风化溢油鉴定。此外,研究发现,在这些有效诊断比值中有4个变化率较小,相对偏差低于5%,保持了较好的稳定性,更适合于重度风化溢油鉴定。     

Application of advanced system identification technique to extract roll damping from model tests in order to accurately predict roll motions

In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer.     

Heterotrophic bacteria and their relationship with plankton in a New Zealand freshwater lake

The viable heterotrophic bacteria of Lake Grasmere in inland Canterbury (43° 05 S, 171° 45 E) were studied. Numbers of bacteria in water above a spring were positively correlated with rainfall in the 7 days before sampling, but bacteria in open water and from over the macrophyte Elodea canadensis were not. There was some increase in the bacterial population in the water over E. canadensis in the autumn to winter months. Numbers of bacteria in the open water ranged from 55 to 1020 cells per millilitre, and were outnumbered by algae by a factor of between 4 and 34. The bacterial population tended to increase after blooms of zooplankton, but there was little or no response to changes in phytoplankton populations. Benthic bacteria rarely increased in numbers after the deposition of organic matter.     

Genetic parameter estimation for juvenile growth and upper thermal tolerance in turbot (Scophthalmus maximus Linnaeus)

Twenty-six half-sib groups(53 full-sib families) of turbot, Scophthalmus maximus Linnaeus, were obtained by artificial insemination. We measured growth in the offspring(40–50 individuals/family) and subjected them to a thermal tolerance challenge over a period of 34 d. There was no significant difference in daily mortality(range: 0.580%–1.391%) between Days 1–13 during the thermal tolerance challenge. However, daily cumulative mortality increased rapidly between Days 14 and 29, especially on Days 15 and 16(20.232% and 34.377%, respectively). Mortality was highest on Day 16(14.145%). We estimated the genetic parameters using the average information restricted maximum likelihood method. We used a likelihood ratio test to evaluate the significance of effects in models with and without identity as an effect, and compared the final log-likelihoods(maximum log L). Lastly, we estimated phenotypic and genetic correlation between the upper thermal tolerance limit(UTT) and body weight(BW). In this study, the positive phenotypic correlation was low between UTT and BW(0.093±0.029). The genetic correlation between UTT and BW was negative(-0.044±0.239). The heritability for upper thermal tolerance was low(0.087±0.032), which is of approximately moderate heritability. The heritability for body weight was high(0.303±0.074). Our results suggest there is significant potential for improvement in the culture of turbot by selective breeding.     

导管架式海上风力发电支撑结构振型扩阶方法

提出1种适用于海上风力发电支撑结构的模态振型扩阶方法。该方法无需借助转换矩阵实现振型扩阶,而是依靠实测模态并通过修正有限元模型对应振型在未测试自由度的振型值而获得空间完备的模态振型,并且所发展的方法在一定程度上可以忽略有限元模型存在的建模误差,是1种直接的估算方法,计算效率相对较高。文中采用三桩导管架式海上风力发电支撑结构验证提出方法的正确性以及在低阶模态振型扩阶上的优越性。数值结果表明,该方法对传感器位置、数量依赖程度低,尤其对于海上风电结构,仅在结构的水深较浅部位布置少数传感器即可比较精确的实现低阶模态振型扩阶,具有良好的工程应用前景。     

A rational approach to seepage flow effects on bottom friction beneath random waves

The bottom friction beneath random waves is predicted taking into account the effect of seepage flow. This is achieved by using wave friction factors for rough turbulent, smooth turbulent and laminar flow valid for regular waves together with a modified Shields parameter which includes the effect of seepage flow. Examples using data typical to field conditions are included to illustrate the approach. The analytical results can be used to make assessment of seepage effects on the bottom friction based on available wave statistics. Generally, it is recommended that a stochastic approach should be used rather than using the rms values in an otherwise deterministic approach.     

北部湾金线鱼、深水金线鱼与日本金线鱼矢耳石形态识别的初步研究

采用2010年1～9月采自北部湾及邻近海域流刺网渔获的54尾金线鱼(Nemipterus virgatus( Houttuyn,1782))、71尾深水金线鱼(Nemi pterus bath ybius Snyder,1911)和65尾日本金线鱼(Nemi pterus ja ponicus (Bloch,1791))耳石样本,进行了椭圆傅立叶分析.耳石轮廓经图像处理后进行灰阶转换和二值化处理,消除噪点,然后解析为椭圆傅立叶标码( EFDs).采用77个EFD系数进行主成分分析和判别分析来区分3种金线鱼的耳石.结果表明,日本金线鱼幼鱼和成鱼耳石在性成熟前后存在显著的体长效应(P＜0.05),金线鱼和深水金线鱼则体长效应不显著(P＞0.05).因此在耳石椭圆傅立叶分析中,日本金线鱼采用性成熟个体样本,金线鱼和深水金线鱼采用全部样本.主成分分析中,第1、第2和第3主成分,分别解释了总变异的65.1％,15.3％和5.3％,可以将3种金线鱼耳石区分开来.EFD系数的逐步判别分析中,3种鱼的平均正判率达98.6％;交互验证结果显示,3种鱼的平均正判率达97.9％,这表明耳石椭圆傅立叶分析可以作为鱼种识别的有效工具.     

中国南海区1992-2012年的中尺度涡旋演化过程表达与统计分析

Automated identification and tracking of mesoscale ocean eddies has recently become one research hotspot in physical oceanography. Several methods have been developed and applied to survey the general kinetic and geometric characteristics of the ocean eddies in the South China Sea（SCS）. However, very few studies attempt to examine eddies＇ internal evolution processes. In this study, we reported a hybrid method to trace eddies＇ propagation in the SCS based on their internal structures, which are characterized by eddy centers, footprint borders, and composite borders. Eddy identification and tracking results were represented by a GIS-based spatiotemporal model. Information on instant states, dynamic evolution processes, and events of disappearance, reappearance, split, and mergence is stored in a GIS database. Results were validated by comparing against the ten Dongsha Cyclonic Eddies（DCEs） and the three long-lived anticyclonic eddies（ACEs） in the northern SCS, which were reported in previous literature. Our study confirmed the development of these eddies. Furthermore, we found more DCE-like and ACE-like eddies in these areas from 2005 to 2012 in our database. Spatial distribution analysis of disappearing, reappearing, splitting, and merging activities shows that eddies in the SCS tend to cluster to the northwest of Luzon Island, southwest of Luzon Strait, and around the marginal sea of Vietnam. Kuroshio intrusions and the complex sea floor topography in these areas are the possible factors that lead to these spatial clusters.     

基于两阶段稳定图的随机子空间识别结构模态参数

基于振动的结构健康监测的前提是从振动测试信号中提取结构模态参数。随机子空间方法是近年来发展起来的一种线性系统辨识方法,可以有效地从环境激励的结构响应信号中提取结构模态参数。在随机子空间识别方法中,确定系统的阶数是该方法的关键工作,稳定图方法是一种比较新颖的确定系统阶次的方法。但是随机子空间方法容易产生虚假模态,这也是随机子空间方法的一个主要缺陷。因此针对于这一缺陷提出了一种基于两阶段稳定图的随机子空间识别结构模态参数方法,该方法的基本思想是将在现场采集的结构的输出信号进行分段,将各段信号用随机子空间结合稳定图进行识别,然后将所有各段所识别的模态参数再一次用稳定图方法进行分析,得出结构的模态参数。最后用一三跨连续梁的数值模型对该方法进行验证,结果表明该方法具有良好的识别效果。