Genetic parameter estimation for juvenile growth and upper thermal tolerance in turbot (Scophthalmus maximus Linnaeus)

Twenty-six half-sib groups(53 full-sib families) of turbot, Scophthalmus maximus Linnaeus, were obtained by artificial insemination. We measured growth in the offspring(40–50 individuals/family) and subjected them to a thermal tolerance challenge over a period of 34 d. There was no significant difference in daily mortality(range: 0.580%–1.391%) between Days 1–13 during the thermal tolerance challenge. However, daily cumulative mortality increased rapidly between Days 14 and 29, especially on Days 15 and 16(20.232% and 34.377%, respectively). Mortality was highest on Day 16(14.145%). We estimated the genetic parameters using the average information restricted maximum likelihood method. We used a likelihood ratio test to evaluate the significance of effects in models with and without identity as an effect, and compared the final log-likelihoods(maximum log L). Lastly, we estimated phenotypic and genetic correlation between the upper thermal tolerance limit(UTT) and body weight(BW). In this study, the positive phenotypic correlation was low between UTT and BW(0.093±0.029). The genetic correlation between UTT and BW was negative(-0.044±0.239). The heritability for upper thermal tolerance was low(0.087±0.032), which is of approximately moderate heritability. The heritability for body weight was high(0.303±0.074). Our results suggest there is significant potential for improvement in the culture of turbot by selective breeding.     

中国南海区1992-2012年的中尺度涡旋演化过程表达与统计分析

Automated identification and tracking of mesoscale ocean eddies has recently become one research hotspot in physical oceanography. Several methods have been developed and applied to survey the general kinetic and geometric characteristics of the ocean eddies in the South China Sea（SCS）. However, very few studies attempt to examine eddies＇ internal evolution processes. In this study, we reported a hybrid method to trace eddies＇ propagation in the SCS based on their internal structures, which are characterized by eddy centers, footprint borders, and composite borders. Eddy identification and tracking results were represented by a GIS-based spatiotemporal model. Information on instant states, dynamic evolution processes, and events of disappearance, reappearance, split, and mergence is stored in a GIS database. Results were validated by comparing against the ten Dongsha Cyclonic Eddies（DCEs） and the three long-lived anticyclonic eddies（ACEs） in the northern SCS, which were reported in previous literature. Our study confirmed the development of these eddies. Furthermore, we found more DCE-like and ACE-like eddies in these areas from 2005 to 2012 in our database. Spatial distribution analysis of disappearing, reappearing, splitting, and merging activities shows that eddies in the SCS tend to cluster to the northwest of Luzon Island, southwest of Luzon Strait, and around the marginal sea of Vietnam. Kuroshio intrusions and the complex sea floor topography in these areas are the possible factors that lead to these spatial clusters.     

A rational approach to seepage flow effects on bottom friction beneath random waves

The bottom friction beneath random waves is predicted taking into account the effect of seepage flow. This is achieved by using wave friction factors for rough turbulent, smooth turbulent and laminar flow valid for regular waves together with a modified Shields parameter which includes the effect of seepage flow. Examples using data typical to field conditions are included to illustrate the approach. The analytical results can be used to make assessment of seepage effects on the bottom friction based on available wave statistics. Generally, it is recommended that a stochastic approach should be used rather than using the rms values in an otherwise deterministic approach.     

导管架式海上风力发电支撑结构振型扩阶方法

提出1种适用于海上风力发电支撑结构的模态振型扩阶方法。该方法无需借助转换矩阵实现振型扩阶,而是依靠实测模态并通过修正有限元模型对应振型在未测试自由度的振型值而获得空间完备的模态振型,并且所发展的方法在一定程度上可以忽略有限元模型存在的建模误差,是1种直接的估算方法,计算效率相对较高。文中采用三桩导管架式海上风力发电支撑结构验证提出方法的正确性以及在低阶模态振型扩阶上的优越性。数值结果表明,该方法对传感器位置、数量依赖程度低,尤其对于海上风电结构,仅在结构的水深较浅部位布置少数传感器即可比较精确的实现低阶模态振型扩阶,具有良好的工程应用前景。     

Heterotrophic bacteria and their relationship with plankton in a New Zealand freshwater lake

The viable heterotrophic bacteria of Lake Grasmere in inland Canterbury (43° 05 S, 171° 45 E) were studied. Numbers of bacteria in water above a spring were positively correlated with rainfall in the 7 days before sampling, but bacteria in open water and from over the macrophyte Elodea canadensis were not. There was some increase in the bacterial population in the water over E. canadensis in the autumn to winter months. Numbers of bacteria in the open water ranged from 55 to 1020 cells per millilitre, and were outnumbered by algae by a factor of between 4 and 34. The bacterial population tended to increase after blooms of zooplankton, but there was little or no response to changes in phytoplankton populations. Benthic bacteria rarely increased in numbers after the deposition of organic matter.     

江苏近岸海域水文气象要素的时空分布特征

2006～2007年在江苏近岸海域进行水文气象要素(气温、湿度、风速风向、波浪、透明度、水色和海水温盐度等)大面观测。数据分析表明,各水文气象要素具有较大的空间分异,四季变化显著。秋季气温明显高于春季,冬季气温较历史数据偏高。整个海域风速较大,风向受季风控制,有效波高与风速之间显著相关。如东附近海域波浪较大,废黄河口波浪较小;春、夏季有效波高较小,而夏、秋季近岸海域波高较小,离岸波高增大。夏季海水透明度最大,平均为2.3m;冬季透明度最小,平均只有0.6m;水色与透明度呈负指数相关。春、秋季水温分布与气温分布基本一致,冬季大致沿等深线分布。射阳河口与长江口为低盐区,辐射沙脊群外缘为高盐区。与20世纪80年代的调查结果相比,出现了一些新特点。这些新的调查成果可为江苏近岸海域的海洋环境保护和可持续发展提供科学依据。     

原油中的正构烷烃类在海沙和海水中风化的模拟实验

通过自然条件下沙表层和水面溢油的模拟风化实验,采用GC-MS作为检测器,研究原油中的正构烷烃在厦门地区的风化规律.结果表明,在一个月的风化模拟实验中,两种不同介质溢油风化均明显体现轻组分的正构烷烃丢失现象,且正构烷烃组分在水面溢油的风化速率低于沙表层溢油速率1～2个碳数.沙上模拟实验后期APr/APh比值明显受到风化影响,诊断比值不适用于油源鉴别.诊断比值An-C17/APr、An-C18/APh在短期风化过程中受风化影响小.水面溢油模拟实验结束后发现水体中n-C13-n-C29的正构烷烃组分含量升高2.9%～327.4%.     

The role of Coriolis in sandbank formation due to a headland/island system

Tidal flow past a headland was modelled and the resulting sandbank formation due to bedload transport by eddy systems was examined with particular emphasis on the role of Coriolis. The headland configuration was extended to the more complex case of a headland with a detached island and the role of Coriolis in sandbank formation was again examined. In the headland case, the contribution of Coriolis resulted in the expected change in bed level at the centre of the residual eddies (positive contribution for the cyclonic eddy and negative change for the anticyclonic eddy). In the headland/island case, the role of Coriolis in the resulting bed level change was a function of eddy shedding from the island, defined by the island wake parameter. When eddy shedding occurred, the inclusion of Coriolis had a large magnitude effect on creating flood/ebb sandbank asymmetry. When eddies remained attached to the island, Coriolis had a minor role in the magnitude of this asymmetry.     

Application of advanced system identification technique to extract roll damping from model tests in order to accurately predict roll motions

In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer.     

Establishment and application of an intelligent treating method for oil spill identification

In the identifying process of an oil spill accident, manual integral and artificial visual comparison are commonly used at present to determine the oil spill sources, these methods are time-consuming and easily affected by human factors. Therefore, it is difficult to achieve the purpose of rapid identification of an oil spill accident. In this paper, an intelligent method of automatic recognition, integration and calculation of diagnostic ratio of Gas Chromatography-Mass Spectrometer (GC/MS) spectrum are established. Firstly, four hundreds of samples collected around the world were analyzed using a standard method and Retention time locking technology (RTL) was applied to reduce the change of retention time of GC/MS spectrum. Secondly, the automatic identification, integration of n-alkanes, biomarker compounds, polycyclic aromatic hydrocarbons and calculation of the diagnostic ratios were realized by MATLAB software. Finally, a database of oil fingerprints were established and applied successfully in a spill oil accident. Based on the new method and database, we could acquire the diagnostic ratios of an oil sample and find out the suspected oil within a few minutes. This method and database can improve the efficiency in spilled oil identification.