A mixed finite element method for Hele-Shaw cell equations

A new numerical method to solve the system of equations describing two phase flow in a Hele-Shaw cell is presented. It combines a mixed finite element method, the method of subtraction of the singularity and a front tracking grid in a single computational strategy. This choice of discretization techniques is well motivated by the difficulties present in the system of equations and the physics of the problem. The new method was tested against analytical solutions and also by solving the Saffman–Taylor viscous fingering problem for finite and infinite mobility ratios. In both cases convergence under mesh refinement is achieved for the fingers developed from an initial sinusoidal interface. Finger splitting is observed for low values of the surface tension and high mobility ratio. Different explanations, based in our results, are provided for this phenomenon. This revised version was published online in July 2006 with corrections to the Cover Date.     

流量测井求取含水层渗透系数的方法及资料解释技术

论述了流量测井的基本理论，涡轮流量计的结构和响应特性，重点分析、讨论利用二次混合抽水二次降深所测得的流量测井曲线，求取含水层渗透系数和静止水位的方法，并以实例说明该方法的具体应用。     

Large-Eddy Simulations of the Baroclinic Mixed Layer

The effects of baroclinicity, imposed on the dry mixed layer by the presenceof large-scale, horizontal temperature gradients, have been investigated basedon a large-eddy simulation model. The purpose of this investigation is to examinesimultaneous impacts of thermal stratification and shear in the atmospheric boundarylayer. For this purpose, five cases are considered – one barotropic, and four baroclinic.Based on the performed simulations, a new parametrization of the interfacial layer isproposed. The parameterization employs new interfacial scaling, which is valid at thetop of the mixed layer. In terms of new scales, dimensionless moments characterizingturbulence at the top of the shearless mixed layer are universal constants. In the shearedcase, dimensionless statistics of turbulence are shown to be functions of the interfacialRichardson number.     

建立混合经济架构，奠定地勘单位长远发展基础

分析了非公有制经济对国有地勘队伍经济体制的影响，论述了适时改革地勘单位产权制度的必要性，提出了地勘单位应该建立混合经济架构的设想，为其长远发展奠定基础。     

Nuclear Waste Disposal Simulations: Couplex Test Cases

We give some results obtained for the Couplex test cases proposed by the ANDRA. In this paper our aim is twofold. Firstly, to compute the release of nuclides out of the repository by concentrating on the 3D near field (Couplex 2). The simulation of the transport phenomena takes into account the dissolution of the glass containers and congruent emissions of the radio-nuclides including filiation chains and some simplified chemistry. Secondly, it is to use the near field computations in order to simulate the nuclide migrations in a 2D far field (Couplex 3). Coupling in between the two simulations takes into consideration the periodicity of the disposal modules and the geometry of the repository described in Couplex 1. The mixed finite element and discontinuous Galerkin methods are used to solve the convection–diffusion equations. In order to handle the nonlinear precipitation/dissolution term, we developed a new iterative technique that combines Picard and Newton–Raphson methods.     

Analytical modeling on consolidation of stiffened deep mixed column-reinforced soft soil under embankment

Stiffened deep mixed (SDM) column is a new ground improvement technique to improve soft soil, which can be used to increase bearing capacity, reduce deformation, and enhance stability of soft soil. This technique has been successfully adopted to support the highway and railway embankments over soft soils in China and other countries. However, there have been limited investigations on its consolidation under embankment loading. This paper developed an analytical solution for the consolidation of embankment over soft soil with SDM column in which core pile is equal to or shorter than outer DM column. The consolidation problem was simplified as a consolidation of composite soil considering the load shear effect of core pile. The developed solution was verified by a comparison with the results computed by three-dimensional (3-D) finite element analysis. A parametric study based on the derived solution was conducted to investigate influence factors—length of core pile, diameter of core pile, diameter of SDM column, modulus of DM column, and permeability coefficient of DM column—on the consolidation behavior of SDM column-supported embankment over soft soil. The developed solution was applied to a case history of SDM column-supported embankment, and a good agreement was found between the predictions and the field measurements.     

点云中混合像元的探测与剔除算法

针对地面三维激光扫描仪扫描过程中产生混合像元的问题,通过对混合像元产生原理和相关特性的分析,提出了一种用于探测和剔除混合像元的算法,并且编制相应的计算机程序予以实现。同时以球体作为实验扫描对象,用混合像元剔除算法对扫描过程中产生的混合像元予以剔除,并比较了混合像元剔除前后点云拟合模型与实际物体在尺寸上及拟合精度的差异,从而验证了该算法的有效性和实用性。混合像元探测与剔除算法可以为后期进行的点云配准、特征提取和曲面建模等工作提供更精确的点云。     

基于混合罚函数法的多尺度电离层层析确权方法

在利用GNSS进行像素基电离层层析时,多尺度层析方法利用权重因子将反演区域不同像素层析模型结合在一起,最终得到电离层电子密度反演结果,可以有效地解决电离层层析过程中不适应问题和最终的电离层电子密度失真现象。在多尺度电离层层析中,不同像素尺度层析模型之间权重是影响最终的电离层电子密度精度的重要因素。为了获得高精度电离层层析模型,考虑到权重因子存在着等式和不等式限制条件,采用解决最优化问题的罚函数法确定不同像素尺度电离层层析模型之间的权重。通过采用实测GNSS观测数据进行电离层多尺度电离层层析,对比了多尺度层析模型的各个子模型建模精度并进行分析,同时将罚函数法获得的模型精度与其他确权方法进行了对比,该方法可以有效地应用于多尺电离层度层析,且最终的层析模型精度优于其他确权方法,更优于单尺度电离层层析模型精度。