有限元强度折减法在公路隧道中的应用探讨

将有限元强度折减法应用于隧道的稳定性评价。利用有限元强度折减法求得的安全系数与潜在滑动面,不仅可以评价隧道的稳定性和设计的合理性,还可以对支护参数和施工工艺提出改进建议。计算表明,泊松比? 的取值对塑性区范围影响很大,但对安全系数基本上没有影响;围岩等级越高,达到破坏状态时围岩的塑性区范围越大,破坏区却越小,安全系数越高;上覆岩体增厚,同类围岩塑性区范围和最大塑性应变值都增大,而安全系数减小。破坏时围岩等级高的隧道塑性区大,围岩等级低的反而小,因此,单纯根据塑性区范围大小来评判隧道的安全性是值得商榷的。     

用于湿地气候效应模拟的三江平原下垫面数据获取

三江平原是我国沼泽湿地的重要分布区。在20世纪的后50 a中,三江平原在经过几次大规模的开荒后,其下垫面发生了明显的阶段性变化,湿地大面积消失,农田面积不断增加。为了认识20世纪下半叶不同时期三江平原湿地的气候效应,拟采用第三代区域气候模式(RegCM3)来开展研究。而目前被广泛用于RegCM3的GL-CC数据,所反映的研究区下垫面几乎不存在沼泽湿地,这与事实严重不符,所以必须获取三江平原有沼泽湿地存在的真实的下垫面数据,才能得到可靠的湿地气候效应的模拟结果。分别选择了4期(1954年、1985年、1996年和2000年)有阶段代表性的航片、TM影像数据为主要数据源,利用ERDAS8.7和Arcview3.2等软件,首先得到4期研究区的土地利用数据,然后通过土地利用数据类型向模式数据类型的转换,从4期研究区土地利用数据中提取出了三江平原下垫面的模式数据。经过误差分析,认为获取的4期三江平原下垫面模式数据准确的反映出研究区几个时期的湿地下垫面实况,可以作为三江平原湿地气候效应模拟的基础数据。     

大面积开荒扰动下的三江平原近45年气候变化

黑龙江省三江平原近45年来，经过大规模的开荒，农田已取代原来的沼泽和沼泽化湿地，成为现今三江平原的主要景观类型，其下垫面发生了巨大变化，采用1955－1999年三江平原地区21个气象台站的气温，降水，日照时数和气压4个要素的资料，分析近45年来三江平原的气候变化和发展趋势：用Yamamoto法和Mann-Kendall法对5年滑动平均的区域季节和年时间序列进行突变检测，定量地认述了三江平原地区的气候变化事实，对于各气候要素出现在20世纪60年代，70年代和80年代的突变事实，尤其是20世纪70年代以来的阶梯式的持续变暖事实，认为三江平原区域气候系统内部的变化可能是引起这些突变的直接原因。     

一种带自由面的三维船体贴体网络的数值生成

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的     

中国地区三种地表反照率产品比较

利用2007—2011年MODIS、GlobAlbedo和ERA-Interim的3种地表反照率产品,借助地理信息系统(Geographic Information System, GIS)空间化技术,对中国地区3种地表反照率产品进行了对比分析。结果表明：3种产品与气象站观测值的时间分布趋势一致,冬季高夏季低,且相关性较高。3种产品中,MODIS与GlobAlbedo的绝对差异值最小,ERA-Interim与MODIS、GlobAlbedo的绝对差异值较大。3种产品在青藏高原和西北山地区域表现出较大的差异,且差异表现为冬半年高,夏半年低。3种产品之间相关性最高的是MODIS与GlobAlbedo,最低的是MODIS与ERA-Interim, 3种产品在40°N以北具有较好的相关性。且在夏季和冬季地表反照率均值的表现说明,ERA-Interim相比MODIS、GlobAlbedo难以反映地表反照率受地形和土地覆被的影响。     

基于遥感特征指数的地表水体自动提取技术研究

为了从海量遥感数据中有效地提取地表水体信息,并提高自动化提取效率,提出了一种基于遥感特征指数的地表水体自动提取方法.该方法选取归一化植被指数(NDVI)、归一化建筑指数(NDBI)和修正归一化水体指数(MNDWI)作为遥感特征指数集,并根据这些指数构建了遥感特征指数曲线.通过分析,发现地表水体在特征曲线中单调上升,植被在特征曲线中单调下降,而其它地物并无此特征.因此,根据这一规律,利用ERDAS IMAGINE软件建立了自动化提取模型.通过与其他方法对比,表明所建立的模型在精度和自动化方面都明显优于其他方法,可用于海量数据地表水体的自动提取.最后,在ARCGIS环境下,并通过决策树模型初步实现了地表水体的自动分类.     

洞庭湖不同水位高程下南荻(Triarrhena lutarioriparia)种群分布格局及生长动态

通过野外不同水位高程固定样地多次调查,结合方差/均值比率法研究了不同水位高程下洞庭湖湿地南荻(Triarrhena lutarioriparia)种群分布格局及生长动态.结果表明:(1)低程区土壤含水量显著高于高程区;低程区土壤颗粒组成与高程区相比有显著差异,低程区土壤为黏砂壤土,高程区为粉砂土;低程区土壤总有机碳、全氮、铵态氮和pH值等与高程区相比无显著差异,而其硝态氮、有效磷、全钾和速效钾含量低于高程区,全磷含量却恰好相反.(2)调查期间,南荻的分布格局随着植物的生长由均匀分布逐渐变为聚集分布,低程区聚集强度更大;(3)南荻的生物量和高度均随时间增长而迅速增加,且低程区的总生物量和增长量均高于高程区;南荻的密度和基径随时间增长而增加,之后趋于平稳,且低程区均高于高程区.结果分析表明,水位高程差异引起的土壤含水量的显著变化可能是影响南荻分布格局和生长动态最重要的因素.因此,适度地调控水位、增加土壤水分含量可能是控制南荻群落扩张的重要措施.     

Evaluation of riverbed magnetic susceptibility for mapping biogeochemical hot spots in groundwater-impacted rivers

Redox hot spots occurring as metal-rich anoxic groundwater discharges through oxic wetland and river sediments commonly result in the formation of iron (Fe) oxide precipitates. These redox-sensitive precipitates influence the release of nutrients and metals to surface water and can act as ‘contaminant sponges’ by absorbing toxic compounds. We explore the feasibility of a non-invasive, high-resolution magnetic susceptibility (MS) technique to efficiently map the spatial variations of magnetic Fe oxide precipitates in the shallow bed of three rivers impacted by anoxic groundwater discharge. Laboratory analyses on Mashpee River (MA, USA) sediments demonstrate the sensitivity of MS to sediment Fe concentrations. Field surveys in the Mashpee and Quashnet rivers (MA, USA) reveal several discrete high MS zones, which are associated with likely anoxic groundwater discharge as evaluated by riverbed temperature, vertical head gradient, and groundwater chemistry measurements. In the East River (CO, USA), widespread cobbles/rocks exhibit high background MS from geological ferrimagnetic minerals, thereby obscuring the relatively small enhancement of MS from groundwater induced Fe oxide precipitates. Our study suggests that, in settings with low geological sources of magnetic minerals such as lowland rivers and wetlands, MS may serve as a complementary tool to temperature methods for efficiently mapping Fe oxide accumulation zones due to anoxic groundwater discharges that may function as biogeochemical hot spots and water quality control points in gaining systems.     

城市下垫面空气动力学参数确定方法研究综述

地表粗糙度和零平面位移是2个重要的空气动力学参数,对于城市下垫面,粗糙元的形态非常复杂,空间分布上存在较大的非均匀性,如何确定城市下垫面地表粗糙度和零平面位移目前尚无最佳方案。概述了这2个参数适用于城市非均匀下垫面的参数化方法,包括风温观测方法和粗糙元形态学方法。探讨了各自在应用过程中存在的问题及进一步的研究工作,并且提出,通过数学模型的改进和卫星遥感技术的引入,粗糙元形态学方法会有更好的发展前景。     

Morphological characteristics of the earthquake surface ruptures on Awaji Island, associated with the 1995 Southern Hyogo Prefecture Earthquake

Abstract The earthquake surface ruptures on the northern side of Awaji Island accompanying the 1995 Southern Hyogo Prefecture Earthquake in Japan consist of three earthquake surface rupture zones called the Nojima, Matsuho, and Kusumoto Earthquake Surface Rupture Zones. The Nojima Earthquake Surface Rupture Zone is - 18 km long and was formed from Awaji-cho at the northern end of Awaji Island to Ichinomiya-cho. It occurred along the pre-existing Nojima geological fault in the northern segment and as a new fault in the southern segment. The northern segment of the Nojima Earthquake Surface Rupture Zone is composed of some subparallel shear faults showing a right-step en echelon form and many extensional cracks showing a left-step en echelon form. The southern segment consists of some discontinuous surface ruptures which are concentrated in a narrow zone a few tens of meters in width. This surface rupture zone shows a general trend striking north 30°-60° east, and dipping 75°-85° east. The deformational topographies and striations on the fault plane generated during the co-seismic displacement show that the Nojima Earthquake Surface Rupture Zone is a right-lateral strike-slip fault with some reverse component. Displacements measured at many of the outcrops are generally 100-200 em horizontally and 50-100 em vertically in the northern segment and a few em to 20 em both horizontally and vertically in the southern segment. The largest displacements are 180 em horizontally, 130 em vertically, and 215 em in netslip measured at the Hirabayashi fault scarp. The Matsuho Earthquake Surface Rupture Zone striking north 40°-60° west was also found along the coastline trending northwest-southeast in Awaji-cho for ～1 km at the northern end of Awaji Island. The Kusumoto Earthquake Surface Rupture Zone occurred along the pre-existing Kusumoto geological fault for ～ 1.5 km near the northeastern coastline, generally striking north 35°-60° east, dipping 60°-70° west. From the morphological and geomorphological characteristics, the Nojima Earthquake Surface Rupture Zone can be divided into four segments which form a right-step en echelon formation. The geological and geomorphological evidence and the aftershock epicenter distributions show clearly that the distributions and geometry of these four segments are controlled by the pre-existing geological structures.