Hydrodynamic forces on partly buried tandem, twin pipelines in current

This study extends the investigations of the forces on a cylinder, laid on, or partly buried in the bed with a parallel twin dummy cylinder nearby and without it, and were determined by measuring the pressure distribution on the cylinder in the case of a steady current. The pressure distribution around the cylinder was measured by using pressure transducers. The forces on the cylinder were calculated by the integration of the measured pressures on the surface of the cylinder. Force coefficients were obtained for the ranges of Re=0.8×10⁴–1.5×10⁴ for the burial depth to diameter RATIO=0:0.7. The distance between axis of the measurement and dummy cylinders to diameter ratio (x/D) was 2, 1.5 and 1. The dummy cylinder was replaced downstream and upstream of the measurement cylinder.     

潮流沙脊的水力学问题探讨

借用河流水力学顺直河道中有两个次生横向环流的假说来解释潮流沙脊的成因，水槽实验和实际观察也支持了这一观点．正是这一次生的纵轴横向环流（即螺旋流）将泥沙从沟槽带向脊顶，建造了大致与潮流方向平行的潮流沙脊．根据底质粒度成份和分布特点．可分为粗底质沙脊和细底质沙脊两类．前者组成物质偏粗，底质分布为脊细槽粗，后者组成物质偏细，底质分布为脊粗槽细．这是因为影响颗粒起动流速的主导因素不同，前者以重力为主，后者以颗粒间粘结力为主．它们都反映沟槽中流速大于脊顶处流速．     

成都地区大气平均温度建模及其在GPS/PWV计算中的应用研究

地基GPS气象学的关键技术是在于通过垂直方向上GPS信号的湿分量延迟值来确定大气可降水量-PWV,而这两个物理量间进行转换时需要用到一个关键性的参数——大气加权平均温度。本文首先讨论了估算加权平均温度的几种方法,然后利用成都地区2005年全年的大气探空数据,采用回归分析方法,建立了适合成都地区的大气加权平均温度模型,精度为±2.21K。最后将该公式应用到成都地区PWV的计算中,得到了非常理想的效果。     

利用Jason-1卫星确定全球平均海面高

介绍了卫星测高数据处理的基本方法,分析研究了卫星测高的主要误差,提出了Jason-1的数据编辑准则,并用其测高数据确定了全球平均海面高,与CLS01模型进行了比较分析.     

柴达木盆地三湖地区磁力异常形成机理研究与异常分析

柴达木盆地的油气资源丰富,近年来在该区发现了大量异常显示,但是各种异常形成机理各不相同,存在较大多解性,使得该区油气储量探明率很低.根据柴达木盆地以往开展的常规非地震勘探的现状及效果,以磁测找油机理为基础,采用磁力资料化极、剩余磁力异常提取和磁力平剖图等处理手段,对三湖地区生物气藏磁异常进行分析研究,取得明显的异常显示效果.     

河西走廊疏勒河流域地质灾害危险性现状评估方法的应用——以甘肃省河西走廊(疏勒河)农业灌溉暨移民安置综合开发建设项目8个移民社区及配套工程建设为例

依据“建设用地地质灾害危险性评估技术要求”、利用野外踏勘及相关资料,对“甘肃省河西走廊（疏勒河）农业灌溉暨移民安置综合开发建设项目8个移民社区及配套工程”进行地质灾害危险性现状评估。结果认为：评估区发育和分布的地质灾害类型有土壤盐渍化、风蚀沙埋和洪水冲蚀。现状评估结果：土壤盐渍化和洪水冲蚀危险性均小;风蚀沙埋有1处危险性中等,其它危险性小。     

城市大比例尺航测成图质量评定

主要从大比例尺航测成图质量评定角度出发,提出了既要满足相应规范和用户要求,又要最大限度的发挥航测成图的优势,对产品质量做出公正、客观、正确的质量评价方法。     

Estimation of covariance matrix from geochemical data with observations below detection limits

Multivariate statistical analyses have been extensively applied to geochemical measurements to analyze and aid interpretation of the data. Estimation of the covariance matrix of multivariate observations is the first task in multivariate analysis. However, geochemical data for the rare elements, especially Ag, Au, and platinum-group elements, usually contain observations the below detection limits. In particular, Instrumental Neutron Activation Analysis (INAA) for the rare elements produces multilevel and possibly extremely high detection limits depending on the sample weight. Traditionally, in applying multivariate analysis to such incomplete data, the observations below detection limits are first substituted, for example, each observation below the detection limit is replaced by a certain percentage of that limit, and then the standard statistical computer packages or techniques are used to obtain the analysis of the data. If a number of samples with observations below detection limits is small, or the detection limits are relatively near zero, the results may be reasonable and most geological interpretations or conclusions are probably valid. In this paper, a new method is proposed to estimate the covariance matrix from a dataset containing observations below multilevel detection limits by using the marginal maximum likelihood estimation (MMLE) method. For each pair of variables, sayY andZ whose observations containing below detection limits, the proposed method consists of three steps: (i) for each variable separately obtaining the marginal MLE for the means and the variances, , , , and forY andZ: (ii) defining new variables by and and lettingA=C+D andB=C–D, and obtaining MLE for variances, and forA andB; (iii) estimating the correlation coefficient _YZ by and the covariance _YZ by . The procedure is illustrated by using a precious metal geochemical data set from the Fox River Sill, Manitoba, Canada.     

弯道超高法在泥石流流速计算中的应用——以四川省汶川县G317国道磨子沟泥石流为例

选取四川省汶川至马尔康公路线的磨子沟作为试验对象,采用弯道超高法推算其泥石流流速。进而可以计算出该次泥石流的平均流量,为公路的改建工程提供设计依据。经过实地调查,用此方法计算磨子沟2005年8月17日暴发的泥石流流速为4.4m/s。同其他流速方法计算的结果相比较,前者值偏大,且偏向于工程安全值。弯道超高法可以解决泥石流观测的局限性和泥石流发生的不可重复性。此方法简便易行,对泥石流防治工程具有一定的实用价值。     

图像平滑算法比较研究及改进策略

图像平滑作为去除图像中含有噪声的图像增强处理技术，是各种与图像有关软件中必不可少的功能模块。文中在分析噪声模型的基础上，对均值平滑、中值平滑、边缘保持平滑等技术从图像处理空间域中的算法原理、实现方法及效率等方面进行了详细比较。针对图像中含有的不同噪声模型，通过多次试验，得出了值得从事图像处理研究者参考的结论。这将有助于提高图像处理软件开发的效率。