考虑颗粒破碎效应的堆石料静动力本构模型

为合理反映颗粒破碎对堆石料力学特性的影响,基于试验结果分析,得出了堆石料在压缩和剪切作用下的颗粒破碎特性规律。通过引入压缩破碎和剪切破碎的相关参数,借鉴已有本构模型的合理定义,吸收临界状态理论和边界面理论的优点,发展了考虑颗粒破碎和状态相关的堆石料静动力统一弹塑性本构模型,并阐述了模型参数的确定方法。该模型不仅能够反映堆石料在静力荷载作用下的低压剪胀、高压剪缩、应变软化和硬化等特性,还能够反映在循环荷载作用下应力-应变的滞回特性和残余变形的累积效应。最后为验证模型的合理性,分别对堆石料的静力三轴和循环三轴试验进行了数值模拟预测,结果表明：模型预测与试验数据吻合良好,所提出的本构模型能够合理地描述颗粒破碎对堆石料静动力变形特性的影响。     

双轴压缩条件下颗粒材料中力链的演化

针对无黏性颗粒材料,开展了柔性边界双轴压缩数值试验,分析了不同围压下力链的数量、方向概率等随轴向应变的变化。研究结果表明：不断加载使得游离的高应力颗粒有所减少,荷载更多的被力链承担;统计意义上,力链最大长度为9个颗粒。轴向±30o范围内力链概率随应变的发展与偏应力一致,而与其邻接的[40o,60o]和[120o,140o]两个方向上的力链概率随应变的发展与偏应力相反;双轴试样剪切破坏时有单剪切带和双剪切带两种模式,当[40o,60o]和[120o,140o]两个角度区间的力链概率有较大差异时,剪切带出现在力链较少的角度区间;当这两个角度区间力链概率接近时,试样中将出现两个剪切带。     

贵州上二叠统龙潭组煤系地层地球化学特征及物源分析:来自黔普地1井的证据

为厘清贵州上二叠统龙潭组煤系地层的物源,以黔西南地区黔普地1井为研究对象,采集了上二叠统龙潭组的岩心进行稀土元素分析。结果表明,龙潭组的稀土总量较高(177.03×10^-6～592.58×10^-6),轻、重稀土分馏明显,稀土元素配分模式呈轻稀土富集、重稀土相对亏损的右倾型;(La/Sm)_N为2.63～4.72,(Gd/Yb)_N值为1.47～2.218,表明轻稀土分馏较重稀土严重;δEu无异常。研究表明,其形成的构造环境与大陆边缘与大陆弧相近,推测黔普地1井二叠系龙潭组物质来源以玄武岩为主。     

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.     

地质雷达方法在上海市轨道交通明珠线工程中的应用

地质雷达方法在上海市轨道交通明珠线工程中的应用表明,此方法在探测地下障碍物中能依靠雷达图象识别其类型、材质、深度等,有利于快速、准确定位,有一定的优越性。     

Duluth Complex apatites: Age reference material for LA–ICP–MS‐based fission‐track dating

Anorthositic series apatites of the Duluth Complex, Minnesota, USA, have high spontaneous fission‐track densities of up to ~10⁷ cm^–2 and a homogeneous age of ~900 Ma, allowing high‐precision fission‐track dating based on LA–ICP–MS U analysis. Absolute fission‐track dating, track‐length measurement and chemical composition analysis were performed to evaluate a cooling history, which is essential for age reference materials. Preliminary inverse modelling for a sample with a shortened track‐length distribution yielded a monotonic cooling history from ~100°C at 925 Ma. The apatites incur an over‐etching problem when employing the commonly used etching protocol involving 5.5 M HNO₃.     

A method for evaluating the longitudinal functional connectivity of a river–lake–marsh system and its application in China

The longitudinal functional connectivity of a river–lake–marsh system (RLMS) refers to the actual water-mediated transport of material from upstream to downstream areas along a spatial gradient and is fundamental to understand hydrological and biogeochemical cycles. However, due to a lack of consensus on appropriate data and methods, the quantification of connectivity is still a challenge, especially at the catchment scale. We developed a new method to evaluate longitudinal functional connectivity based on fluxes of materials (water, sediment, and chemicals) along a RLMS. The calculation of fluxes is based on the longitudinal pattern of terrain gradient, which influences transport efficiency, and on contributions from hillslopes, which set the initial spatial template of material loading to the RLMS. We evaluate the contributions from hillslopes to RLMS based on a new modified version of the index of sediment connectivity (IC) proposed by Borselli et al. (2008) and revised by Chartin et al. (2017).We applied this method to the Baiyangdian Basin covering an area of 3.4 × 10⁴ km² in China and quantified longitudinal functional connectivity during normal, wet, and dry periods(April, July and December) in year 2016. We found that areas with good structural connectivity exhibited poor functional connectivity during the normal and dry periods. Modelling testing with discharge data from hydrological stations and measured chemicals from Baiyangdian Lake was satisfactory in test periods. We conclude that public data and Digital Elevation Model-derived information can be used to reliably map the longitudinal functional connectivity of RLMSs. The proposed method provides a useful tool for monitoring and restoring the longitudinal functional connectivity of RLMSs and our results indicate that efforts aimed at restoring functional connectivity in RLMSs should take into account landscape patterns that can greatly influence fluxes in the watershed.     

Modelling the time‐dependent behaviour of granular material with hypoplasticity

This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way.     

物质地理学的研究进展和启示：追踪物质(following the things)视角

伴随着“文化转向”与“再物质化”思潮的出现,物质地理学已经成为西方社会文化地理研究中新兴且活跃的研究分支之一,而追踪物质(following the things)是物质地理学中重要的方法论视角,它强调人文地理学所重视的“流动性”,通过追踪特定物质在流动过程中物质性的变化以及能动性,揭示物质流动中的社会关系与文化意义。论文通过梳理和分析西方学界中物质地理学的相关文献,阐述了近年来的研究进展,同时指出现阶段在追踪物质视角下该领域的主要议题为：物质的象征研究、物质与认同研究、生产与消费研究以及权力博弈与协商研究等内容。最后,论文归纳总结了当下物质地理学存在的研究局限与空白,展望了未来中国物质地理学研究可进一步探索的话题与方向,以期打开未来中国与西方国家物质地理学的对话窗口。     

初论成矿场与矿产勘查意义

成矿场是指地质历史时期某成矿地区引起岩石变形的应力场,承载成矿作用引起流体效应的流体场,以及成矿元素迁移、沉淀、富集、叠加改造形成的物质场的总称.分析了一个成矿地区应力场、流体场、物质场的空间关系、研究内容与研究方法.根据成矿背景、控制因素、成矿环境将其分为7类成矿场,即:逆冲(推覆)-后伸展构造背景成矿场、走滑-伸展(伸展-走滑)-后逆冲构造背景成矿场、中酸性火山(次火山)岩浆活动背景成矿场、基性-超基性岩浆活动背景成矿场、盆地裂谷-海底喷流环境成矿场、外生海相建造环境成矿场、外生陆相建造环境成矿场.对前5类成矿场(以内生矿产为主)进行了系统的内涵表述.在此基础上对前5类成矿场的矿产勘查过程中关键地质因素进行了归纳分析,这对具体矿产勘查工作具有现实的指导意义.