元素地球化学场及其地学意义

有关岩浆花岗岩成因的原地重熔说,揭示了各种化学元素在内生过程中的迁移规律。据此并结合元素在周期表中的位置,得出了元素地球化学场的概念,元素地球化学场不但总结了元素在原地重熔过程中的聚散趋势,而且揭示了元素自身组构与其空间分布规律的关系,展示出三个不同层次的地质断面,即花岗岩体上部和顶部盖层断面,大陆地壳断面及地球球体断面。     

云南金厂金矿床蚀变超基性岩体与金的成矿作用

金矿化与蚀变超基性岩体的空间关系、矿化特征、蚀变超基性岩体、成矿流体、微量元素、硫同位素组成、表明金主要来源于金厂蛇纹石化、滑石化、碳酸盐化超基性岩体。在岩体蚀变过程中,在碱性相对还原的介质条件下,金主要以硫络合物的形式进入成矿溶液,在Ｔ、Ｐ、ＰＨ、Ｅｈ等物理化学参数发生变化的条件下沉淀。     

硫化物矿物标准物质的研制

研制的黄铁矿、黄铜矿、方铅矿和闪锌矿４个标准物质是国内首次成功研制的硫化物矿物成分分析标准物质,样品采用重选,磁选和电磁选等选矿技术提纯矿物,获得纯度大于９５％的单矿物样品。黄铁矿和闪锌矿用棒磨机少量多级粉碎至０．１４７ＭＭ,方铅矿和黄铜矿用于小型玛瑙球磨机粉碎至０．０９７ＭＭ。经单因素方差分析检验,均匀性符合要求,采用小包装在干燥,充氩气气氛中保存样品,使样品稳定性有足够保证。连续４年定期监测了     

The Material Sourece of a New Type of Copper Deposits—Evidence from Stable Isotopes

The new type of copper deposits concerned with in this paper are vein copper deposits found in the Lanping-Simao Rift Basin, Yunnan,China. As is indicated by H,O,C,S,Pb and Sr isotopes, water and mineralizers in the ore-forming fluids were derived from heated meteoric water and mantle, respectively.The metallic elements(Cu,Ag,Pb,Zn,As,Sb,Fe,REE,etc.)are characterized by a mixed source from the crust and the mantle.     

钒矿床研究进展与展望

钒是工业国家重点关注和争夺的资源,已被部分国家列为关键金属。本文对矿床类型、地质特征、时空分布以及成矿机制等方面进行了系统总结和分析,以期丰富钒成矿理论研究,为提高钒资源的预测和勘查效率提供支撑,为钒资源储备提供保障。研究发现,钒矿床主要分为岩浆型和沉积型,其中岩浆型钒矿床（主要指钒钛磁铁矿床）成矿与铁镁质–超铁镁质岩及部分斜长岩侵位密切相关,成矿年龄与成岩年龄一致,钒可能来自上地幔并在岩浆演化过程中结晶析出赋存于含钒钛磁铁矿中;沉积型钒矿床多形成于黑色岩系及部分砂岩中,成矿多集中于上寒武世,钒可能来自海水和赋矿围岩,由于氧化还原电位降低,以吸附和类质同象等形式赋存于有机质和硅酸盐矿物中。同时,钒矿床的成因研究存在较多问题,如成矿物质钒的来源、迁移过程、赋存形式及富集条件等。笔者建议在今后研究中通过分析钒化学行为、围岩沉积物理–化学–生物条件及岩浆演化的地质动力背景来解析钒矿床成因机制。     

绵阳地区白垩系岩石风化过程的生态效应

论述了四川绵阳地区白垩系七曲寺组砂岩、泥岩风化过程的信息动态及其对森林植被的生态效应，为长江上游水土保持防护林提供开发信息。     

Genesis study of high abundant 17a（H）-diahopanes in Lower Cretaceous lacustrine source rocks of the Lishu Fault Depression,Songliao Basin,Northeast China

Relatively abundant 17α（H）-diahopanes have been detected in the lower cretaceous lacustrine source rocks from the Lishu Fault Depression in the Songliao Basin Northeast China. Rich long chain tricyclic terpanes （carbon number up to C35） and gammacerane have been observed in those source rocks with relatively abundant 17α（H）-diahopanes, which is rarely seen in previous reports. In this paper, the formation of 17α（H）-diahopanes has been discussed from three aspects including maturity, oxidation-reduction nature of depositional environment and parent material composition by the GC/MS analyses. The results reveal that maturity and oxidation-reduction nature of depositional environment have little effect on the formation of 1 7α（H）-diahopanes in the investigated area. How- ever, the positive correlation between long-chain tricyclic terpanes and 17α（H）-diahopanes argues strongly for a common origin, and the origin is related to the algaes in saline water environment. The algaes in saline water envi- ronment may be a kind of origin of 1 7α（H）-diahopanes.     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

不同卸荷速率下岩石强度特性研究

卸荷条件下的岩石强度特性研究对于分析开挖作用下岩石工程的安全性具有极为重要的意义。卸荷试验中影响岩石强度的因素很多,包括岩性、卸荷点的位置、卸荷应力路径和卸荷速率等,以锦屏大理岩为对象,重点研究卸荷速率对强度的影响。提出用屈服接近速率来统一表征加荷和卸荷下的应力增加或减小的速率,通过比较加荷和卸荷条件下的屈服接近速率表明,当围压卸荷速率为常规试验轴向应力加荷速率的0.2～0.3倍时,两种应力路径下接近破坏时的屈服接近速率相当。通过2D弹塑性细胞自动机的数值试验和大理岩的室内卸围压试验来验证理论分析的结果,表明:围压卸荷速率越大,岩样的强度就越高;当卸荷速率为常规轴向加荷速率的0.2～0.3倍时,卸荷和加荷路径下的强度相当。从而得出结论:对于各种卸荷应力路径,如果卸荷点处于弹性范围内,当接近破坏时的屈服接近速率一定时,应力路径对强度的影响不明显。     

Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.