关于海域面积精确计算的若干问题探讨

海域面积精确计算是实现海洋功能区划的基础和关键之一。本文通过对江苏省海洋功能区划工作中误差的分析 ,并针对其产生原因 ,在地图投影的选择和坐标的变换、扫描精度的控制、配准精度的控制、图象的数字化和图形编辑等方面 ,提出了相应的优化处理方法 ,提高了海域面积计算的精度 ,将其中误差控制在估计值范围内 ,从而在实际工作中有一定的应用价值。     

Wave reflection from partially perforated-wall caisson breakwater

In 1995, Suh and Park developed a numerical model that computes the reflection of regular waves from a fully perforated-wall caisson breakwater. This paper describes how to apply this model to a partially perforated-wall caisson and irregular waves. To examine the performance of the model, existing experimental data are used for regular waves, while a laboratory experiment is conducted in this study for irregular waves. The numerical model based on a linear wave theory tends to over-predict the reflection coefficient of regular waves as the wave nonlinearity increases, but such an over-prediction is not observed in the case of irregular waves. For both regular and irregular waves, the numerical model slightly over- and under-predicts the reflection coefficients at larger and smaller values, respectively, because the model neglects the evanescent waves near the breakwater.     

The dynamic behaviour of a river-dominated tidal inlet, River Murray, Australia

Australia's largest river, the River Murray, discharges to the southern ocean through a coastal lagoon and river-dominated tidal inlet. Increased water extractions upstream for irrigation have led to significantly reduced flows at the mouth and, as a result, the area is undergoing rapid change, particularly with regard to the rate at which sediment is being transported into the lagoon. Based on detailed and accurate bathymetric surveys it has been possible to estimate that the rate of lagoon in-filling is of the order of 100,000 m³ per year for the period June 2000 to May 2003, although the actual rate shows significant year to year variability. Dredging of the lagoon commenced in 2000 in an attempt to reverse the trend.In an effort to understand the behaviour of the inlet a one-dimensional numerical model of the inlet has been developed. The model extends the original of van de Kreeke by including a dynamic inlet throat area based on predicted river flows and a sediment transport module to predict the resulting net sediment transport. Comparisons with water level data collected on both the ocean and lagoon sides of the mouth have shown that the model is able to predict the attenuation and lag of the tidal signal reasonably well. The sediment transport model was based on predicted sediment concentrations in the surf zone and was found to predict the rate of sediment in-filling to an acceptable level of accuracy. It is envisaged that the model will be a useful management tool, especially since it is possible to manipulate river discharges to the mouth.     

计算域的选取对风暴潮数值模拟的影响

作者以 72 0 3号台风过程中引起的黄海沿岸水文测站的风暴潮过程为例 ,选取不同计算域 ,模拟计算的同一测站的风暴潮增水值有很大差异。只有选取整个黄渤海海域 ,才能得到较精确的风暴潮增水结果。从而揭示在封闭或半封闭海域中由风暴过程激发的区域自由振荡 ,是风暴潮增水中不容忽视的量。说明该海域中的风暴潮过程是海域整体效应的响应 ,因此认为数值模拟中计算域应选取整个封闭或半封闭海域     

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.     

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.     

任意曲线曲面上重磁位场转换的B样条函数法

提出用B样条函数求解曲线、曲面上重磁位场的向上延拓,水平、垂向导数计算,磁异常分量互换的方法。该方法的特点是:原理简明,程序通用性强,计算精度高。     

哀牢山-红河断裂带中段应变分析

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。     

A singular evolutive extended Kalman filter to assimilate ocean color data in a coupled physical–biochemical model of the North Atlantic ocean

Within the European DIADEM project, a data assimilation system for coupled ocean circulation and marine ecosystem models has been implemented for the North Atlantic and the Nordic Seas. One objective of this project is to demonstrate the relevance of sophisticated methods to assimilate satellite data such as altimetry, surface temperature and ocean color, into realistic ocean models. In this paper, the singular evolutive extended Kalman (SEEK) filter, which is an advanced assimilation scheme where three-dimensional, multivariate error statistics are taken into account, is used to assimilate ocean color data into the biological component of the coupled system. The marine ecosystem model, derived from the FDM model [J. Mar. Res. 48 (1990) 591], includes 11 nitrogen and carbon compartments and describes the synthesis of organic matter in the euphotic zone, its consumption by animals of upper trophic levels, and the recycling of detritic material in the deep ocean. The circulation model coupled to the ecosystem is the Miami isopycnic coordinate ocean model (MICOM), which covers the Atlantic and the Arctic Oceans with an enhanced resolution in the North Atlantic basin. The model is forced with realistic ECMWF ocean/atmosphere fluxes, which permits to resolve the seasonal variability of the circulation and mixed layer properties. In the twin assimimation experiments reported here, the predictions of the coupled model are corrected every 10 days using pseudo-measurements of surface phytoplankton as a substitute to chlorophyll concentrations measured from space. The diagnostics of these experiments indicate that the assimilation is feasible with a reduced-order Kalman filter of small rank (of order 10) as long as a sufficiently good identification of the error structure is available. In addition, the control of non-observed quantities such as zooplankton and nitrate concentrations is made possible, owing to the multivariate nature of the analysis scheme. However, a too severe truncation of the error sub-space downgrades the propagation of surface information below the mixed layer. The reduction of the actual state vector to the surface layers is therefore investigated to improve the estimation process in the perspective of sea-viewing wide field-of-view sensor (SeaWiFS) data assimilation experiments.