正、反演结合对川东石炭系储层地震响应特征的分析

川东地区石炭系碳酸盐岩储层是油气勘探开发的重点及难点储层之一。该储层以厚度小且变化大、低孔、低渗、非均质特点强为特征；地震响应上表现为典型的薄层响应特点。这里综合考虑了石炭系储层和上覆梁山组地层不同的地质特征，建立了地质、测井分析控制下的精细模型及正、反演，探讨了檀木场气田石炭系储层的地震响应特征。其正演结果表明，梁山组地层对石炭系的地震响应具有重要的影响，时差较振幅更为敏感。在正演结论指导下，运用考虑了时差和梁山组地层的初始模型，获得了较高精度的反演结果。     

由电法勘探资料计算地下水矿化度的软件系统

地下水矿化度是划分地下咸淡水的重要参数，过去人们常用手工计算。但由于涉及的参数众多，计算过程烦琐，人工计算不仅速度慢，而且容易出错。一种利用Visual Fortrain和C^ 编制的批量计算地下水矿化度的软件系统，可有效地解决这类烦恼。该系统根据事先由电(磁)测深资料反演出的真电阻率数据，借助水文地质资料划分出不同区块的孔隙度、水质类型及温度等参数，自行判别计算公式，在数秒内可算完一条电(磁)测深剖面下的地下水矿化度。经实际试算，效果令人满意。     

浅水方程数值计算方法的研究

求解以水位为变量的连续方程,并根据Navier-Stokes方程压力修正算法的基本思想,建立了浅水方程的水位修正算法,放宽了对离散时间步长的限制.通过对离散方程系数矩阵的重新构造,建立了高分辨率有限元格式,该格式既具有较高的离散精度又避免了数值解的伪振荡.对动量方程的阻力项做负坡线性化处理,提高了露滩计算的稳定性.数值模拟结果与解析解吻合良好,表明所建立的数值计算方法是正确的和可靠的.     

岩石受压破裂的ULF和LF电磁前兆信号

实验观测到了4类岩性、18块样品在单轴压力下直至破裂发生全过程中的ULF和LF电磁前兆信号。这些不同频率的信号是零散出现的，其形态为一组组脉冲，宽度为4ms～16ms，幅度为0．1mV～1．4mV。实验发现具同一谐振频率的天线收到的信号频次与其相对于裂缝的位置和方位有关。结果还表明，电磁前兆信号的频度与岩样强度有关，抗压强度高的岩样电磁前兆信号多。微破裂可能产生了偶电层，在破裂过程中向外辐射，产生了LF频段的磁信号，ULF磁信号则主要由压磁效应产生。     

地震周期的存在及形成机制讨论

根据1900～2000年中国大陆、台湾及全球地层记录及前人的研究，论证了地层周期存在的可能性及形成机制。作者认为，是太阳活动、月球运动轨道及各行星运动轨道的周期性变化，通过磁力及万有引力改变地球内部物质的分布，从而引起地球自转速度的周期性变化，最终致使地展出现周期性的活跃期及平静期。     

Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).     

Post-emplacement tilting of lava flows inferred from magnetic fabric study: the example of Oligocene lavas in the Jeanne d’Arc Peninsula (Kerguelen Islands)

Statistical analysis of the magnetic fabric of samples from several successive lava flows emplaced under similar conditions can allow determination of the mean flow direction when magnetic fabric data from individual flows do not lead to reliable results. A difference between the obtained flow direction and the present dip direction indicates that the flows were tilted after emplacement. For 2 successive series of flows on the Jeanne d’Arc Peninsula presently NNW dipping, this method shows lava emplacement along a SSW–NNE direction. This indicates a gentle tilting acquired during a period of weak deformation in the whole archipelago. Additionally, the magnetic fabric data allow the reconstruction of the different conditions of emplacement of these two series of lava flows and of formation of the local thick conglomerate interbedded between these series.     

An Mw based earthquake Catalogue for central, northern and northwestern Europe using a hierarchy of magnitude conversions

Data from 25 local catalogues and 30special studies of earthquakes in central,northern and northwestern Europe have beenincorporated into a Databank. The dataprocessing includes discriminating eventtypes, eliminating fake events and dupletsand converting different magnitudes andintensities to M_w if this is not givenby the original source. The magnitudeconversion is a key task of the study andimplies establishment of regressionequations where no local relations exist.The Catalogue contains tectonic events fromthe Databank within the area44°N–72°N,25°W–32°E and the time period1300–1993. The lower magnitude level forthe Catalogue entries is setat M_w == 3.50. The area covered by thedifferent catalogues are associated withpolygons. Within each polygon only datafrom one or a small number of the localcatalogues, supplemented by data fromspecial studies, enter the Catalogue. Ifthere are two or more such catalogues orstudies providing a solution for an event,a priority algorithm selects one entry forthe Catalogue. Then M_w is calculatedfrom one of the magnitude types, or frommacroseismic data, given by the selectedentry according to another priority scheme.The origin time, location, M_w magnitude and reference are specified for eachentry of the Catalogue. So is theepicentral intensity, I₀, if providedby the original source. Following thesecriteria, a total of about 5,000earthquakes constitute the Catalogue.Although originally derived for the purposeof seismic hazard calculation within GSHAP,the Catalogue provides a data base for manytypes of seismicity and seismic hazardstudies.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

基于Voronoi图的空间方向关系形式化描述模型

运用认知心理学信息加工的观点，建立了基于Voronoi图的空间方向关系形式化描述模型，并详细阐述了模型的逻辑结构、数据结构和空间方向的计算过程。为了验证模型的正确性，列举了该模型计算空间方向的几个例子，并总结了模型的优、缺点。