Magnetically-aided evolution of protoplanetary disks

We investigate the global evolution of a turbulent protoplanetary disk incorporating the effects of Maxwell stress due to a large-scale magnetic field permeating the disk. A magnetic field is produced continuously by an dynamo and the resultant Maxwell stress assists the viscous stress in p roviding the means for disk evolution. The most striking feature of magnetized disk evolution is the presence of the surface density bulge located in the magnetic gap, the region of the disk where the degree of ionization is too low to allow for coupli ng between the magnetic field and the gas. The bulge persists for a time of the order of 10⁵–10⁶ yr. The presence and persistence of the surface density bulge may have important implications for the process of planet formation and the overall characteristics of resultant planetary systems.Operated by USRA under contract No. NASW-4574 with NASA.     

Using numerical modelling to evaluate tsunami hazard near the Kuril Island

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.     

中国三个大地震的震源参数及讨论

大地震的震源机制及地震矩、应力降等参数,不(又对认识地震的破裂过程,而且对预报强地面运动都是非常重要的。一些文章对板内地震应力降的特点、地震矩与高频源谱的关系及区域特征的讨论,使我们可直接由长周期体波或面波得出的地震矩M₀估计出不同地区中大地震的高频源谱,以供强地面运动预报参考。 由于对发生在中国板内的1976年11月6日盐源地震（M_s=6.5）和1976年11月15日宁河地震（M_s=6.3）的震源参数还没有详尽的报道;另外,对1973年7月14日     

220 ka以来萨拉乌苏河流域地层磁化率与气候变化

 萨拉乌苏河流域滴哨沟湾剖面磁化率变化结果表明:近220 ka来我国北方气候变化极不稳定,存在着不同尺度的频繁变化,特别是寒冷气候阶段变化尤为频繁,其中倒数第二次冰期存在5个气候旋回,末次冰期存在10个气候旋回。这些气候变化与深海氧同位素、极地冰芯反映的全球变化具有良好的对应关系,反映了该区气候变化与全球变化的一致性。控制本区气候变化的主要因素是全球冰量变化及太阳辐射影响的东亚季风变化。     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

Effects of magnetic interactions in anisotropy of magnetic susceptibility: Models, experiments and implications for igneous rock fabrics quantification

Besides granites of the ilmenite series, in which the anisotropy of magnetic susceptibility (AMS) is mainly controlled by paramagnetic minerals, the AMS of igneous rocks is commonly interpreted as the result of the shape-preferred orientation of unequant ferromagnetic grains. In a few instances, the anisotropy due to the distribution of ferromagnetic grains, irrespective of their shape, has also been proposed as an important AMS source. Former analytical models that consider infinite geometry of identical and uniformly magnetized and coaxial particles confirm that shape fabric may be overcome by dipolar contributions if neighboring grains are close enough to each other to magnetically interact. On these bases we present and experimentally validate a two-grain macroscopic numerical model in which each grain carries its own magnetic anisotropy, volume, orientation and location in space. Compared with analytical predictions and available experiments, our results allow to list and quantify the factors that affect the effects of magnetic interactions. In particular, we discuss the effects of (i) the infinite geometry used in the analytical models, (ii) the intrinsic shape anisotropy of the grains, (iii) the relative orientation in space of the grains, and (iv) the spatial distribution of grains with a particular focus on the inter-grain distance distribution. Using documented case studies, these findings are summarized and discussed in the framework of the generalized total AMS tensor recently introduced by Cañon-Tapia (Cañon-Tapia, E., 2001. Factors affecting the relative importance of shape and distribution anisotropy in rocks: theory and experiments. Tectonophysics, 340, 117–131.). The most important result of our work is that analytical models far overestimate the role of magnetic interaction in rock fabric quantification. Considering natural rocks as an assemblage of interacting and non-interacting grains, and that the effects of interaction are reduced by (i) the finite geometry of the interacting clusters, (ii) the relative orientation between interacting grains, (iii) their heterogeneity in orientation, shape and bulk susceptibility, and (iv) their inter-distance distribution, we reconcile analytical models and experiments with real case studies that minimize the role of magnetic interaction onto the measured AMS. Limitations of our results are discussed and guidelines are provided for the use of AMS in geological interpretation of igneous rock fabrics where magnetic interactions are likely to occur.     

大变形有限元法分析边坡稳定性

边坡稳定性分析的重要任务是确定边坡潜在滑面的位置及相应的安全系数,鉴于坡体位移可在现场监测中直接得到,提出边坡潜在滑面确定的位移判据,采用大变形有限元首先计算出边坡的位移场,然后在开挖面的不同高度作塑性区内的水平位移参考线,依次连接参考线上的位移突变点即得到边坡失稳的潜在滑面位置,分析滑面上的应力以及岩体抗剪强度即得到边坡的整体安全系数。     

Hydrogeology of thermal waters in Viterbo area, central Italy

A conceptual hydrogeological model of the Viterbo thermal area (central Italy) has been developed. Though numerous studies have been conducted on its geological, geochemical and geothermal features, there is no generalized picture defining the origin and yield of the hydrothermal system. These latter aspects have therefore become the objectives of this research, which is based on new hydrogeological and geochemical investigations. The geological setting results in the coexistence of overlapped interacting aquifers. The shallow volcanic aquifer, characterized by fresh waters, is fed from the area around the Cimini Mountains and is limited at its base by the semiconfining marly-calcareous-arenaceous complex and low-permeability clays. To the west of Viterbo, vertical upflows of thermal waters of the sulphate-chloride-alkaline-earth type with higher gas contents, are due to the locally uplifted carbonate reservoir, the reduced thickness of the semiconfining layer and the high local geothermal gradient. The hot waters (30–60°C) are the result of deep circulation within the carbonate rocks (0.5–1.8 km) and have the same recharge area as the volcanic aquifer. The upward flow in the Viterbo thermal area is at least 0.1 m³/s. This flow feeds springs and deep wells, also recharging the volcanic aquifer from below.     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

New Generation of Probabilistic Seismic Hazard Assessment for the Area Cologne/Aachen Considering the Uncertainties of the Input Data

A new earthquake catalogue for central, northern and northwestern Europe with unified M_w magnitudes, in part derived from chi-square maximum likelihood regressions, forms the basis for seismic hazard calculations for the Lower Rhine Embayment. Uncertainties in the various input parameters are introduced, a detailed seismic zonation is performed and a recently developed technique for maximum expected magnitude estimation is adopted and quantified. Applying the logic tree algorithm, resulting hazard values with error estimates are obtained as fractile curves (median, 16% and 84% fractiles and mean) plotted for pga (peak ground acceleration; median values for Cologne 0.7 and 1.2 m/s² for probabilities of exceedence of 10% and 2%, respectively, in 50 years), 0.4 s (0.8 and 1.5 m/s²) and 1.0 s (0.3 and 0.5 m/s²) pseudoacclerations, and intensity (I₀ = 6.5 and 7.2). For the ground motion parameters, rock foundation is assumed. For the area near Cologne and Aachen, maps show the median and 84% fractile hazard for 2% probability of exceedence in 50 years based on pga (maximum median value about 1.5 m/s²), and 0.4 s (>2 m/s²) and 1.0 s (about 0.8 m/s²) pseudoaccelerations, all for rock. The pga 84% fractile map also has a maximum value above 2 m/s² and shows similarities with the median map for 0.4 s. In all maps, the maximum values fall within the area 6.2–6.3° E and 50.8–50.9° N, i.e., east of Aachen.