A new approach for vegetation change detection in urban areas

IntroductionVegetation distribution and change is regardedas ani mportant sign of urban environment . Withcity expanding and population increasing, herecomes a series of problems on environment ,andmoreover ,greening ratio is regarded as a stand-ard of ci…     

PLANETARY BOUNDARY LAYER HEIGHT MEASURED BY A WIND PROFILER BASED ON THE WAVELET TRANSFORM

Planetary boundary layer height (PBLH) is an important input parameter for any boundary layer study or model, either climate or atmospheric. The variation of the PBLH is also of great significance to the physical processes of numerical prediction, diagnosis of weather forecasting and monitoring urban pollutants. However, effective ways to monitor the PBLH continuously are lack. Wind profilers are commonly used in monitoring PBLH continuously because of its high temporal and spatial resolution, coupled with capability of continuous detection. In this paper, the covariance wavelet transform (CWT) is used to analyze the range-corrected signal-to-noise ratio (SNR) of the wind profiler to determine the PBLH, which is then compared with the results measured by the gradient method and the radiosonde. The conclusions are as follows: (1) The scaling parameter a and translation parameter b of the wavelet are critical in determination of the PBLH by applying the CWT as different values may get completely different results, which requires to select appropriate values in the calculation carefully. (2) Quality control is crucial in determining the PBLH because good quality control can help remove mutation points, which makes the determined PBLH more consistent with the actual situation. (3) In clear-air, the gradient method is not applicable if the boundary layer turbulence is inhomogeneous and the impact of noise is large for that it is easy to be impacted by the mutation of SNR caused by the atmosphere turbulence instability and other factors, which will cause large errors, while the CWT method as an improvement of the gradient method can determine the PBLH quite well. (4) Through quality control, the PBLHs determined by the CWT are consistent with those of radiosonde, and the correlation coefficient between them is 0.87.     

Automatic Location of Swarm Earthquakes from Local Network Data

An advanced method of automated seismic phase picking and exact location and magnitude determination of swarm micro-earthquakes from local network data is presented. The phase picker is applied in two steps: first, S-wave groups are identified using a polarisation detector, and then corresponding P-wave groups are searched for. The times of maximum P- and S-amplitudes are then used as starting points for the determination of accurate P- and S-arrival times. The maximum S-wave amplitudes are utilised for determining local magnitudes. The whole procedure is checked by simultaneous preliminary hypocentre location providing estimates of local magnitudes and a compatibility check of the candidate P- and S-phases. The closest station to the earthquake cluster is used as a master, and the phase search at the remaining stations is governed by the P- and S-phases identified at the master station. Thanks to the use of apriori information on the approximate position of hypocentres, the procedure is also capable of picking the individual P- and S-phases of sequences of overlapping swarm events. The performance of the procedure was tested by comparison of the automatically and interactively created catalogues of the January 1997 NW-Bohemia micro-earthquake swarm. With stations located at epicentral distances between 0 and 20 km, the difference between hypocentre coordinates obtained by automatic and interactive processing did not exceed 80 m for 86% events. All events above magnitude 0.5 were identified, and the automatically determined polarity of first P-wave motion proved to be correct in 89% of them.     

复杂环境下地基SAR粗差探测及应用

雷达视线受施工机械等的间断遮挡导致部分影像产生相位奇异值,从而造成解缠错误及误差传递,简单的相关影像处理难以识别受遮挡影像。本文提出了改进的基于小波变换的信号奇异性检测方法,通过对地基SAR PS点时序相位特征进行分析,将遮挡影像识别转化为粗差探测问题;由PS点相位序列与影像位置关系,根据测区PS点相位序列的奇异点集合得到受遮挡影像集;最后将受遮挡影像剔除后得到的地基SAR监测结果与精密全站仪、水准与游标卡尺数据进行对比分析。结果表明：本文提出的方法用于受遮挡影像的识别是可行的,解决了地基SAR在实际工程应用中可能存在的影像遮挡带来的测量数据含有粗差的问题,提高了监测区域伪影像检测的效率与准确性。     

基于民用航空规章的结冰气象条件探测数据分析方法

我国极度缺乏结冰气象条件中的云层数据,我国民用航空规章第25部附录C结冰条件只能复制于美国航空规章,对飞行探测得到的结冰云层数据进行附录C符合性分析的方法也少有研究。附录C结冰条件形成于20世纪40年代末,当时的探测手段与如今采用先进探测仪器所获取的数据形式有很大差异,因此首先明确附录C结冰条件参数的具体定义,根据当前探测仪器测量数据的高分辨率特性,对数据处理与分析方法进行研究。最后基于该方法对安庆结冰气象探测数据进行了分析,从分析结果看,该方法能够清晰呈现所探测结冰云层的结冰条件基本特征及其与附录C的符合性程度。     

数学形态滤波在大坝安全监控数据粗差检测中的应用

为了有效地判别和定位大坝安全监控数据中的粗差,将数学形态滤波应用于粗差检测,针对大坝监控数据的变化特点研究了其算法和结构元素的选取。首先根据实测数据的特点选择合适的结构元素,然后根据所选的结构元素对数据进行数学形态滤波处理,最后根据实测值与滤波结果之间差值的大小应用四分点法拟定门限来判别粗差。对某混凝土坝裂缝开度数据加入粗差以模拟实际的情况,并采用该方法来检测加入的粗差,滤波得到的结果有效抵挡了粗差的影响,加入的粗差全部被检测出。     

基于位置点统计的时空异常检测与分析

探讨了位置数据异常分析的一种新思路,给出了面向异常的时空表达模型,建立了基于区域位置点统计的异常检测和分析框架,探寻异常在事件影响下的时空发展趋势和分布特征。通过纽约两个月的出租车出行数据的实验分析验证了框架的有效性,并发现一些有趣的规律,为公共安全、交通管控应急、城市功能区分析等提供指导信息。     

联合升降轨InSAR 与高分辨率光学遥感的滑坡隐患早期识别

宁夏隆德县地处六盘山西麓,地质条件复杂,受季节性强降雨影响,滑坡地质灾害频发,给当地人民生命财产安全造成了严重威胁。针对宁夏东部和南部植被覆盖率高的特点,文章利用合成孔径雷达升降轨差分干涉测量（Synthetic Aperture Radar Difference Interferometry, D-InSAR）技术与高分辨率光学遥感相结合,对隆德县展开滑坡隐患早期识别与探测研究。首先通过干涉叠加技术（Stacking）分别获得2019年1月—2020年5月隆德县升轨和降轨方向的雷达视向形变速率,然后结合高分辨率光学遥感影像产品和数字高程模型（DEM）,基于专家判识经验建立适用于该研究区的滑坡隐患形态和变形解译标志,完成全县范围的滑坡隐患综合遥感识别和地面调查工作。本次遥感调查工作共识别滑坡隐患47处,野外调查验证21处,其中核实16处,准确率为71.4%。实地调查结果验证了综合遥感识别与探测技术在宁夏南部地质灾害隐患遥感调查的适用性和可行性,同时也验证了识别结果的准确性,为宁夏南部地区滑坡防治和突发地质灾害应急提供了重要的科学依据。     

多特征差分核支持向量机模型的湿地变化检测

文章通过对不同特征空间、不同时相信息和不同类别引入多核函数组合和类别加权方式,构建了基于多特征差分核的加权支持向量机变化检测模型,能够获得平衡样本大小、综合多特征空间的变化检测结果.以上海崇明岛东端地区为例,利用4期ETM+/TM影像数据,基于构建的SVM变化检测模型,最终得到研究区湿地资源的空间变化格局,结果表明检测模型能够有效、准确地提取多种湿地变化类别的空间分布信息;并从景观水平上对检测结果进行格局分析,为湿地保护和管理提供科学参考.     

复杂断裂体系识别技术研究与应用

随着勘探的深入,现在的很多勘探目标都是断裂体系非常发育的圈闭,这样针对圈闭里断层的识别和刻画就变得尤为重要。通过对尼日尔三角洲盆地深水区的复杂断裂圈闭的研究认为：（1）利用分频超道数据体估计结构倾角,将相干体分析方法与超道技术相结合,可使大型断层成像更为清晰。（2）利用小断层主频段地震数据,对不同尺度的体曲率数据进行融合,可显著提高小断层的识别能力。（3）利用梯度矢量来描述地质体的倾角和方位,可剥除大倾角地层信息,使断层成像更为清晰。（4）本技术方法在研究区取得了比较好的效果,各类特征的断层能够清晰识别,降低了断裂系统解释的多解性。（5）本技术体系对其他类似区域的断层识别具有借鉴意义。