潜艇疲劳载荷的概率模型

探讨了建立潜艇疲劳载荷概率模型的方法，引入了正态分布和两参数威布尔分布两种概率模型。两参数威布尔分布较适合于用来描述潜艇下潜深度分布的概率特征。可根据潜艇的设计参数、任务及航行区域等因素来选取最可能的分布形式获得潜深分布密度函数。潜艇疲劳热点部位的应力(应变)幅值分布，可由应力(应变)和潜深的关系通过相应的变换得到。     

渤、黄、东海内潮的数值模拟

在全球的海洋中,中国东海和临近海域是最显著的内潮生成地之一。本文采用NODC(Levitus) World Ocean Atlas 1998提供的季平均温、盐资料,计算海水的密度,并计算垂向密度梯度的最大值点,得到一个较符合海水实际的密度分层。使用三维非线性数值模型(将海洋分为2层)研究了潮汐(M2,S2,K1,O1分潮)作用下渤黄东海的内潮,揭示了整个海区内潮起伏的空间分布,结果发现大振幅的波动均发生在台湾东北(冲绳海槽)海域和中国近海地形突变之处,其中前者更显著。对于各分潮模拟得到的表面潮与TOPEX/Poseidon高度计资料基本一致。研究结果表明上层海水的深度和厚度的梯度对内潮有一定的影响;冬季分布区域比夏季小,强度比夏季大。     

Rain-Flow and Reverse Rain-Flow Counting Method for the Compilation of Fatigue Load Spectrum

The rain-flow counting method is widely used to compile the fatigue load spectrum. The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reverse rain-flow counting method is proposed in this paper. In this counting method, the rule for counting of the rain-flow method is modified, so that the sequence of load-time need not be adjusted. This is a valid and useful method to count cycles and compile the load spectrum and it can be widely used in ocean engineering.     

湍流数值模拟中封闭模式应用的局限性

通过对琼州海峡的潮流场特征进行数值模拟，指出了选择不同的特征混合长度表达式对数值模拟结果的影响，表明了基于特征混合长度理论的流封闭模式在近海湍流数值模拟中应用的局限性。     

1994年发生在台湾海峡的一次地震海啸的数值模拟

建立了一个地震海啸数值模式,模式包含越洋海啸传播部分和近岸海啸变形部分,在越洋海啸传播部分中采用线性浅水方程,使用蛙跃格式求解,并且选择合适的空间步长与时间步长,使差分格式中产生的数值频散与包辛尼斯克方程中的物理频散一致,这样在不影响海啸数值计算精度的前提下,节省了计算机的机时与内存.在近岸海啸变形部分的计算中,考虑了非线性对流项与海底摩擦项.同时该模式采用了多重网格嵌套技术,提高了所关心地区的计算精度.利用这个地震海啸模式模拟了1994年发生在台湾海峡的一次地震海啸,结果与观测记录较吻合.这个模型已用于我国沿海核电站可能最大地震海啸的数值计算.     

Research on Maneuverability and Simulation of Underwater Vehicles for Pipeline Detection and Maintenance

1 .IntroductionWiththe advent of underwater vehicle technology in the offshore industry, major survey and in-spectiontasks can be done at lower cost withfaster execution.Pipe inspection is of major interest inthat respect because thousands of meters of pi…     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

塘沽海区海底地形的SAR影像仿真与反演研究

利用袁业立、金梅兵(1997)提出的海底地形SAR影像仿真与反演模型，对渤海塘沽海区的一张Radarsat SAR影像进行了仿真和水深反演研究。研究结果表明：仿真影像与真实SAR影像基本吻合，反演水深与实际水深也有较好的一致性；进一步证实了袁业立(1997)SAR成像机理的正确性和在中国近海利用SAR影像进行浅海水深探测的可行性。     

Dynamics and control of a towed underwater vehicle system, part I: model development

Autonomous vehicles are being developed to replace the conventional, manned surface vehicles that tow mine hunting towed platforms. While a wide body of work exists that describes numerical models of towed systems, they usually include relatively simple models of the towed bodies and neglect the dynamics of the towing vehicle. For systems in which the mass of the towing vehicle is comparable to that of the towed vehicle, it becomes important to consider the dynamics of both vehicles. In this work, we describe the development of a numerical model that accurately captures the dynamics of these new mine hunting systems. We use a lumped mass approximation for the towcable and couple this model to non-linear numerical models of an autonomous surface vehicle and an actively controlled towfish. Within the dynamics models of the two vehicles, we include non-linear controllers to allow accurate maneuvering of the towed system.     

底部浮泥表层推移速度分布的ADCP—GPS估测方法

ADCP对底跟踪走航观测的流速数据中包含水体底部浮泥、底沙运动信息,对比GPS定位方法算出的水体流速数据可以分离出浮泥相对于GPS定位的运动信号,从而达到对底质推移观测的目的。