1970—2016年阿尔金山冰川长度变化

长度是冰川的重要几何参数,对于认识冰川动态特征和模拟冰川厚度具有重要价值.基于阿尔金山第一次和第二次冰川编目数据及Landsat OLI遥感影像,利用冰川中流线方法提取了阿尔金山1970年、2010年和2016年的冰川长度数据,并结合气象资料分析了冰川长度对气候变化的响应.结果表明:2016年阿尔金山共有冰川507条,...     

多种降阻材料搭配在变电站接地网改造中应用

在北海市三塘110KV变电站接地网系统改造工程实践中,通过不等长接地体技术及多种将阻材料搭配使用,克服了原接地网接地电阻值增大因素,并对变电站接地网改造和施工工艺进行设计。     

Cartographic Design and the Space–Time Cube

This paper reports on the results of an empirical evaluation that aimed to define the effectiveness and efficiency of different visual variables in depicting the Space–Time Cube’s (STC) content. Existing STC applications demonstrate that the most used visual variables are size and colour hue. Less is known, however, about their usability metrics. The research sets design criteria for STC contents, such as space–time paths, based on the cartographic design theory. The visual variables colour hue, colour value, colour saturation, size and orientation have been applied in two different use case studies. Besides, to support the three-dimensional visual environment, depth cues such as shading and transparency were considered too. User tests have been executed based on real-world problems with particular attention for the visualization strategy and data complexity. The outcomes revealed the most efficient and effective visual variables to represent data of various complexities in the STC.     

Cartographic Symbol Design Considerations for the Space–Time Cube

The cartographic representation of geographic phenomena in the space–time cube comes with special challenges and opportunities when compared with two-dimensional maps. While the added dimension allows the display of attributes that vary with time, it is difficult to display rapidly varying temporal data given the limited display height. In this study, we adapt 2D cyclic point symbols to construct 3D surfaces designed along a helical path for the space–time cube. We demonstrate how these complex?3D helical surfaces can display detailed data, including data reported daily over 100 years and data reported in four-hour intervals over a year. To create the point symbols, each value is plotted along the curve of a helix, with each turn of the helix representing one year or week, respectively. The model is modified by varying the radii from the time axis to all points using the attribute value, in these cases maximum daily temperature and four-hourly ridership, and then creating a triangulated surface from the resulting points. Using techniques common to terrain representation, we apply hue and saturation to the surface based on attribute values, and lightness based on relief shading. Multiple surfaces can be displayed in a space–time cube with a consistent time interval facing the viewer, and the surfaces or viewer perspective can be rotated to display synchronized variations. We see this method as one example of how cartographic design can refine or enhance operations in the space–time cube.     

Hydrodynamic performance of a T-shaped floating breakwater

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.     

CFD modelling of a small–scale fixed multi–chamber OWC device

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.     

An efficient and robust approach to predict ship self-propulsion coefficients

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.     

海州湾4种鱼类生长特征的空间异质性

传统的渔业资源评估均假设鱼类的生长参数是匀质的,然而近年来越来越多的研究表明海洋鱼类生长存在空间异质性。为探究海州湾鱼类生长参数的空间异质性现象,本研究分析了2013–2018年海州湾及其邻近海域方氏云鳚(Pholis fangi)、尖海龙(Syngnatus acus)、小黄鱼(Larimichthys polyactis)和赤鼻棱鳀(Thryssa kammalensis)的空间分布,使用电子体长频率分析方法结合Bootstrap重抽样方法估算了这4种鱼类的生长参数及其在深、浅水区域中的差异。结果显示,这4种鱼类生长参数均表现出一定的空间异质性,其中尖海龙和小黄鱼生长参数的空间异质性表现较为明显。这种差异可能是由于空间上的理化条件、群落结构以及物种本身洄游分布的差异而产生的。     

基于低成本单频u-blox接收机的GPS/BDS定向性能分析

针对高精度GNSS定向应用场景,通过实验对比对低成本单频u-blox接收机的数据质量和解算精度。结果表明,u-blox接收机GPS、BDS观测值的信噪比略低于测量型接收机;伪距精度分别为0.91 m、0.56 m,相位精度分别为1.35 cm、1.20 cm。在静态观测环境下,u-blox的定向精度可以达到航向0.2°/m和俯仰0.4°/m;动态环境下解算结果稍差,但也可以达到航向0.3°/m和俯仰0.6°/m,略低于高成本测量型接收机单频数据的实时动态定向精度。     

一种海洋混合层深度的智能识别方法研究

文章提出了一种识别混合层深度的人工智能方法。该方法在温度(密度)与压强(或深度)间建立线性模型, 并且将其系数和方差做成一组表征廓线特征的统计量。初始时为模型设定一个主观的先验分布, 在一个自海表向下移动的窗口内通过贝叶斯链式法则和最小描述长度原理学习新数据, 得到系数均值的最大后验概率估计。用F-检验识别系数发生突变的位置, 以此确定混合层的存在性及其深度。通过2017年2月太平洋海域的地转海洋学实时观测阵(Array for Real-time Geostrophic Oceanography, ARGO)数据进行测试, 并且以质量因子(Quality Index, QI)值作为判断识别混合层深度结果准确性的依据, 发现该方法相比于梯度法、阈值法、混合法、相对变化法、最大角度法和最优线性插值法在识别结果上具备更大的QI值。表明该方法能够准确识别混合层深度。