A filtering approach for estimating lake water quality from remote sensing data

In this paper we consider the estimation of lake water quality constituent distributions from hyperspectral remote sensing data. We present a computational approach that can be used to assimilate information from mathematical evolution models into data processing. The method is based on a reduced order iterated extended Kalman filter, and a convection–diffusion model is used to describe the movement of the water quality constituents. The performance of the technique is evaluated in a simulation study. The results show that the filter approach with an appropriate evolution model yields estimates that have better spatial and temporal resolutions than those obtained with conventional methods. Furthermore, the use of a feasible evolution model may make it possible to obtain information also on the concentrations in the lower parts of the lake.     

Spatio-temporal characteristics of small-scale wave–current ripples on the Ameland ebb-tidal delta

Ebb-tidal deltas are highly dynamic environments affected by both waves and currents that approach the coast under various angles. Among other bedforms of various scales, these hydrodynamics create small-scale bedforms (ripples), which increase the bed roughness and will therefore affect hydrodynamics and sediment transport. In morphodynamic models, sediment transport predictions depend on the roughness height, but the accuracy of these predictors has not been tested for field conditions with strongly mixed (wave–current dominated) forcing. In this study, small-scale bedforms were observed in the field with a 3D Profiling Sonar at five locations on the Ameland ebb-tidal delta, the Netherlands. Hydrodynamic conditions ranged from wave dominated to current dominated, but were mixed most of the time. Small-scale ripples were found on all studied parts of the delta, superimposed on megaripples. Even though a large range of hydrodynamic conditions was encountered, the spatio-temporal variations in small-scale ripple dimensions were relatively small (height 0.015 m, length 0.11 m). Also, the ripples were always highly three-dimensional. These small dimensions are probably caused by the fact that the bed consists of relatively fine sediment. Five bedform height predictors were tested, but they all overestimated the ripple heights, partly because they were not created for small grain sizes. Furthermore, the predictors all have a strong dependence on wave- and current-related velocities, whereas the ripple heights measured here were only related to the near-bed orbital velocity. Therefore, ripple heights and lengths in wave–current-dominated, fine-grained coastal areas ( mm) may be best estimated by constant values rather than values dependent on the hydrodynamics. In the case of the Ameland ebb-tidal delta, these values were found to be m and m. ©2019 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.     

Geology of the Acropolis prospect,South Australia,constrained by high-precision CA-TIMS ages

Abstract

Acropolis is an Fe-oxide–copper–gold prospect ～20?km from Olympic Dam, South Australia, and marked by near-coincident gravity and magnetic anomalies. Prospective Fe-oxide–apatite?±?sulfide veins occur in Mesoproterozoic and Paleoproterozoic volcanic and granitoid host units beneath unmineralised sedimentary formations. We have produced a geological map and history of the prospect using data from 16 diamond drill holes, including LA-ICPMS and high-precision CA-TIMS ages. The oldest unit is megacrystic granite of the Donington Suite (ca 1850?Ma). A non-conformity spanning ca 250 My separates the Donington Suite and felsic lavas and ignimbrites of the Gawler Range Volcanics (GRV; 1594.03?±?0.68?Ma). The GRV were intruded by granite of the Hiltaba Suite (1594.88?±?0.50?Ma) and felsic dykes (1593.88?±?0.56?Ma; same age as the Roxby Downs Granite at Olympic Dam). The felsic dykes are weakly altered and lack Fe-oxide–apatite–sulfide veins, suggesting that they post-date the main hydrothermal event. If correct, this relationship implies that the main hydrothermal event at Acropolis was ca 1594?Ma and pre-dated the main hydrothermal event at Olympic Dam. The GRV at Acropolis are the same age as the GRV at Olympic Dam and ca 3–7 My older than the GRV exposed in the Gawler Ranges. The gravity and magnetic anomalies coincide with sections through the GRV, Hiltaba Suite and Donington Suite that contain abundant, wide, Fe-oxide veins. The GRV, Hiltaba Suite and Donington Suite are unconformably overlain by the Mesoproterozoic Pandurra Formation or Neoproterozoic Stuart Shelf sedimentary formations. The Pandurra Formation shows marked lateral variations in thickness related to paleotopography on the underlying units and post-Pandurra Formation pre-Neoproterozoic faults. The Stuart Shelf sedimentary formations have uniform thicknesses.

1. KEY POINTS

2. Fe-oxide–apatite?±?sulfide veins are hosted by the Gawler Range Volcanics (1594.03?±?0.68?Ma), the Hiltaba Suite granite (1594.88?±?0.50?Ma) and Donington Suite granite (ca 1850?Ma).

3. The age of felsic dykes (1593.88?±?0.56?Ma) interpreted to be post-mineralisation implies that the main hydrothermal event at Acropolis was ca 1594?Ma.

4. The Gawler Range Volcanics at Acropolis are the same age as the Gawler Range Volcanics at Olympic Dam and ca 3 to 7 My older than the Gawler Range Volcanics exposed in the Gawler Ranges.

     

西昆仑卡日巴生岩体和苦子干岩体的隆升：来自磷灰石裂变径迹分析的证据

笔者对采自青藏高原西北部塔什库尔干县城西侧卡日巴生花岗岩体和苦子干碱性花岗岩体的7个不同高程的样品进行了磷灰石裂变径迹年龄和径迹长度的测试分析。结果表明,自5Ma以来,这一地区经历了脉动式的,总体由缓慢到快速的隆升过程。通过“径迹年龄—高程”法等计算的隆升速率表明,5～2Ma隆升速率为0.1mm/a±;2Ma后,隆升速率增至2mm/a±。同时对样品进行了径迹长度的分析,表明5Ma以来的隆升并不是一个持续抬升过程,存在着相对稳定的阶段,总体表现为一脉动式隆升。并结合区域地质资料分析,认为早期的隆升与印度板块与欧亚大陆的碰撞挤压有关,2Ma后的隆升是由青藏高原内部热均衡调整造成的。所测试的样品中,6个样品的磷灰石裂变径迹年龄在2.14～5.19Ma,显示出随着样品高程的增加,裂变径迹年龄增大的规律。而其中一个样品的单颗粒径迹年龄较为分散,揭示了早期与隆升有关的热历史的信息。     

Drainage density changes during rainfall

Observations of stream behaviour during rainfall indicate that previous notions of a simple expanding and contracting network need review and refinement. In a small rural catchment near Armidale, N.S.W. changes in flowing stream length during rainfall have been depicted on flow length graphs which indicate a varied network response to similar rainfall amounts. Channel flow phenomena include discontinuous flow, the generation of flow points within the channel and movement of water downslope from saturated depression sources. Localized physical controls have a significant effect on stream growth which is a sensitive indicator of the catchment response to rainfall. During rapid changes in stream length total flowing length and discharge are highly correlated. A model of the pattern of network expansion and contraction involves several phases of flow contraction.     

Estimation of Sensible Heat Flux from Surface Temperature Wave and One-Time-of-Day Air Temperature Observation

By means of the algorithm presented here, the temporal course H(t) and the daily mean H¯ of the sensible heat flux H can be estimated from measurements of the thermodynamic surface temperature (as a function of time) and from a one-time-of-day air temperature observation. In addition to these temperatures, one needs estimates for daily mean wind speed, for the roughness lengths of momentum and heat transfer, and for the displacement height. First, a quite general solution of the equation for heat conductance (equation for the vertical profile of potential temperature (z,t)) in the dynamic sublayer will be presented. The undetermined parameters in this solution will be defined with the aid of the above mentioned measurements. The influence of horizontal advection will be taken into account. After that, the sensible heat flux can be evaluated from the temperature difference between surface and air with the well known resistance formulae. In this paper the algorithm is derived for areas with homogeneous surfaces, i.e., with uniform surface temperatures. Finally, the method will be verified by measurements taken during the field campaigns HIBE 89 (Hildesheimer Börde in Germany) and EFEDA 91 (Spain). The root mean square errors (RMSE) for the comparison between measurement and model with regard to the temperature difference of surface and air amount to one or two degrees Kelvin, and the error of H¯ reaches 10 to 25 per cent. The method can be used to determine the sensible heat flux from measurements of surface temperatures by satellites (e.g., METEOSAT), but can also be applied to ground based measurements. For instance, horizontal temperature advection can be estimated from measurements at a single location, especially if more than one near-surface air temperature is available. The procedure can be generalized for larger areas, which consist of various surface types with different surface temperatures. This generalization of the algorithm is in progress and will be addressed in a subsequent paper. It will allow us to improve the estimates for H(t) by means of temperature measurements from, e.g., NOAA/AVHRR or LANDSAT/TM, taking into account the heterogeneity of the area that is contained in one METEOSAT pixel.     

Non-Darcian groundwater flow in leaky aquifers

Abstract

A simplified method has been developed for solving leaky aquifer non-Darcian flow hydraulics. The principle of volumetric approach is combined with the confined-aquifer, time-dependent drawdown equation in an observation well. The groundwater flow in the leaky aquifer is assumed to obey a non-Darcian flow law of exponential type. The results are obtained in the form of type-curve expressions from which the necessary bundles of curves are drawn for a set of selective non-Darcian flow aquifer parameters. Although application of the methodology appears as rather limited but it provides a scientific contribution and extension of leaky aquifer theory towards nonlinear flow conditions. The methodology developed herein is applied to some actual field data from the eastern sedimentary basin in the Kingdom of Saudi Arabia.     

Application of linear and nonlinear techniques in river flow forecasting in the Kilombero River basin,Tanzania / Application de techniques linéaires et non-linéaires à la prévision des débits dans le bassin de la Rivière Kilombero,en Tanzanie

Abstract

Modelling of the rainfall–runoff transformation process and routing of river flows in the Kilombero River basin and its five sub-catchments within the Rufiji River basin in Tanzania was undertaken using three system (black-box) models—a simple linear model, a linear perturbation model and a linear varying gain factor model—in their linear transfer function forms. A lumped conceptual model—the soil moisture accounting and routing model—was also applied to the sub-catchments and the basin. The HEC-HMS model, which is a distributed model, was applied only to the entire Kilombero River basin. River discharge, rainfall and potential evaporation data were used as inputs to the appropriate models and it was observed that sometimes the system models performed better than complex hydrological models, especially in large catchments, illustrating the usefulness of using simple black-box models in datascarce situations.     

Non‐local damage modelling of concrete: a procedure for the determination of model parameters

This paper presents a procedure for the determination of parameters of non‐local damage models. This is to assure a consistent response of a non‐local damage model, as choice of the internal length and other parameters of the model are varied. Correlations between the internal length and other parameters governing the local constitutive behaviour of the model are addressed and exploited. Focus is put on the relationship between the internal length of the non‐local model and the width of the fracture process zone. Numerical examples are used to demonstrate the rigour of the proposed method. Copyright © 2006 John Wiley & Sons, Ltd.