Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

Optimal design of viscoelastic dampers using eigenvalue assignment

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluating accuracy for two empirical methods in predicting settlement of drilled shafts

Several theoretical, empirical and semi-empirical methods are available in the literature to predict settlement of drilled shafts in sandy soils. In the Arabian Gulf countries, specifically in the United Arab Emirates, equations and procedure from the rest of the world are being used in analysis and design of drilled shafts without proper validation. It is the aim of this study to assess the applicability and evaluate the accuracy of two well known, and commonly used methods for pile prediction in the United Arab Emirates (UAE), namely Vesic (1977) and Poulos (1979), via comparison with data from field pile load tests conducted on shafts drilled in the region. Some of these tests were conducted for the purpose of this study, while others were made available through the courtesy of International Piling Contractors who are active in the region (e.g. Bauer International and Swiss Borings). Pile load test data were analyzed to back-calculate the model parameters related to settlement under different loading stages. Geological data and soil properties were obtained from studies conducted at the relevant sites. An effort is made to correlate soil properties with the prediction models. Statistical analysis is conducted to assess the accuracy of the results obtained from the two methods at different stages of loading via those obtained from pile load tests. Moreover, a detailed parametric study is conducted to assess the effect of the related parameters on the predicted pile settlement and the estimated settlement at different stages of loading. The study concluded with a recommendation of the most appropriate models and procedures to be followed for predicting the settlement of drilled shafts in the UAE, together with useful charts and correlation relations. Results showed that settlement values predicted by Vesic (1977) and Poulos (1979) overestimates the true values. This revised version was published online in July 2006 with corrections to the Cover Date.     

Design of backfilled thin-seam coal pillars using earth pressure theory

In underground coal mining any increase in coal recovery rate is dependent on a decrease in pillar size. Backfilling is one way of reducing the required size of pillars and hence the volume of coal left underground. Therefore any comparisons made between a self-supported mine layout and backfill supported mine layout are based directly on pillar design. The most effective way to examine the effect of backfill on pillar support, and subsequently the rate of recovery, would be to incorporate the mechanisms of backfill support directly into the current design procedure for coal pillars. This paper presents a review of the mechanics of backfill support, a method of estimating the magnitude of that support based on earth pressure theory, and an example that incorporates backfill support into current coal pillar design.     

电子地图中线状要素移动注记关键问题研究

探讨了电子地图移动注记的几个关键问题 ,提出了将分段注记和移动注记相结合的思想 ,并在此基础上提出了采用回溯法解决注记之间的冲突 ,从而较好地解决了图幅移动之后某些屏幕内线状要素注记不可见或表达模糊的问题 ,实现了注记输出的完整性和美观性的统一 ,提高了图形输出的效率 ,节省了存储空间 ,在实际应用中取得了较好的效果 ,充分体现了电子地图在线状要素注记显示这一环节的优越性     

Efficient analysis of pile-group effect on seismic stiffness and strength design of buildings

A new efficient method is developed for the analysis of pile-group effects on the seismic stiffness and strength design of buildings with pile foundations. An efficient continuum model consisting of a dynamic Winkler-type soil element and a pile is used to express the dynamic behavior of the structure-pile-soil system with only a small numerical error. The pile-group effect is taken into account through the influence coefficients among piles which are defined for interstory drifts and pile-head bending moments. It is shown that, while the pile-group effect reduces the interstory drift of buildings in general, it may increase the bending moment of piles at the head. This means that the treatment without the pile-group effect results in the conservative design for super-structures and requires a revised member design for piles.     

Statistical Analysis on the Corner Period of Site-Related Design Spectra

INTRODUCTIONFromTJ1 1 74 ,theseismicdesignforbuildingshasbeenbasedontheaccelerationresponsespectruminChina (HuYuxian ,1 988) .ThevalueofTgoftheresponsespectrumvariesbecauseofdifferentsiteclassesanddifferentearthquakeenvironments .Designresponsespectrainc…     

Evolutionary aseismic design and retrofit of structures with passive energy dissipation

A new computational framework is developed for the design and retrofit of building structures by considering aseismic design as a complex adaptive process. For the initial phase of the development within this framework, genetic algorithms are employed for the discrete optimization of passively damped structural systems. The passive elements may include metallic plate dampers, viscous fluid dampers and viscoelastic solid dampers. The primary objective is to determine robust designs, including both the non‐linearity of the structural system and the uncertainty of the seismic environment. Within the present paper, this computational design approach is applied to a series of model problems, involving sizing and placement of passive dampers for energy dissipation. In order to facilitate our investigations and provide a baseline for further study, we introduce several simplifications for these initial examples. In particular, we employ deterministic lumped parameter structural models, memoryless fitness function definitions and hypothetical seismic environments. Despite these restrictions, some interesting results are obtained from the simulations and we are able to gain an understanding of the potential for the proposed evolutionary aseismic design methodology. Copyright © 2005 John Wiley & Sons, Ltd.     

三峡水库区巫山新县城库岸综合治理设计回顾

三峡水库区巫山新县域库岸综合治理工程范围内涉及到滑坡、泥石流、塌岸等多种地质灾害。治理工程综合运用了多种技术与结构措拖，工程的复杂性和典型性在整个三峡库区具有极强的代表意义。笔者对整个治理方案的布置情况进行了归纳总结，并以翔实的第一手资料对治理工程设计过程中出现的几种典型问题一一进行了分析与论述．提出了相应的解决方案与合理化建议。结论认为，库岸综合治理工作，必须根据不同的地形特征，结合城区总体布局及沿线市政工程建设，综合考虑，有机结合，做到治理和利用相结合，最大限度地改善新城建设用地环境和城市生态环境。设计人员必须依照现场实际条件进行动态设计，确保工程方案合理、可靠、经济。文中讨论的问题和实践经检对同类工程具有一定的借鉴意义。     

上海市公共卫生中心空调设计

介绍了上海市公共卫生中心空调通风的设计特点,突出反映在呼吸道传染病区、呼吸道门诊、呼吸道临检、生物安全实验室的系统设计中,并介绍了空调水系统的特殊要求。