Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.     

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1--9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks.     

喷涂聚脲弹性体技术在海港码头预应力大管桩上的应用

针对北仑电厂预应力大管桩表面潮湿,需候潮作业,施工条件复杂,施工作业时间短的特点,从表面处理、参数的设定、喷涂施工、质量控制及验收和存在问题及解决方案等方面,介绍了喷涂聚脲弹性体技术在已建海港码头预应力大管桩表面防腐保护工程中的应用情况。可为类似结构物的设计、施工、维护及管理提供参考。     

�������Ƶ��𲨼�¼����

????????????????????????????????????????????????????????????????????????????????????????????????????У?1??????????????????????e ^-1.5????????????(<20 km)?????(>20 km)?????????????;2????????????????????????????????????????1?????????????????Ч????????У???????Щ???????????ε???Ч???3???????S???????????????????????P???????С,?????????????????в???????й??     

基于GNSS的单波束测深系统在大中型水库水下地形测量中的应用

随着水库在经济社会发展中所起的作用日趋明显,对水库的开发、治理更加重视,获取高精度的水库水下地形数据变得更加急迫.随着测深技术、差分GNSS技术以及姿态传感器的不断发展,基于GNSS的测深系统为水下地形测量提供了全新的解决方案.通过合理规划测线,经过声速改正、吃水改正,利用船载GNSS导航定位和测深仪采集测深数据,经转...     

A constitutive model for mechanical and chemo‐mechanical compaction in sedimentary basins and finite element analysis

Compaction and associated fluid flow are fundamental processes in sedimentary basin deformation. Purely mechanical compaction originates mainly from pore fluid expulsion and rearrangement of solid particles during burial, while chemo‐mechanical compaction results from Intergranular Pressure‐Solution (IPS) and represents a major mechanism of deformation in sedimentary basins during diagenesis. The aim of the present contribution is to provide a comprehensive 3D framework for constitutive and numerical modeling of purely mechanical and chemo‐mechanical compaction in sedimentary basins. Extending the concepts that have been previously proposed for the modeling of purely mechanical compaction in finite poroplasticity, deformation by IPS is addressed herein by means of additional viscoplastic terms in the state equations of the porous material. The finite element model integrates the poroplastic and poroviscoplastic components of deformation at large strains. The corresponding implementation allows for numerical simulation of sediments accretion/erosion periods by progressive activation/deactivation of the gravity forces within a fictitious closed material system. Validation of the numerical approach is assessed by means of comparison with closed‐form solutions derived in the context of a simplified compaction model. The last part of the paper presents the results of numerical basin simulation performed in one dimensional setting, demonstrating the ability of the modeling to capture the main features in elastoplastic and viscoplastic compaction. Copyright © 2016 John Wiley & Sons, Ltd.     

An improved SPH method for saturated soils and its application to investigate the mechanisms of embankment failure: Case of hydrostatic pore‐water pressure

The method of smoothed particle hydrodynamics (SPH) has recently been applied to computational geomechanics and has been shown to be a powerful alternative to the standard numerical method, that is, the finite element method, for handling large deformation and post‐failure of geomaterials. However, very few studies apply the SPH method to model saturated or submerged soil problems. Our recent studies of this matter revealed that significant errors may be made if the gradient of the pore‐water pressure is handled using the standard SPH formulation. To overcome this problem and to enhance the SPH applications to computational geomechanics, this article proposes a general SPH formulation, which can be applied straightforwardly to dry and saturated soils. For simplicity, the current work assumes hydrostatic pore‐water pressure. It is shown that the proposed formulation can remove the numerical error mentioned earlier. Moreover, this formulation automatically satisfies the dynamic boundary conditions at a submerged ground surface, thereby saving computational cost. Discussions on the applications of the standard and new SPH formulations are also given through some numerical tests. Furthermore, techniques to obtain the correct SPH solution are also proposed and discussed throughout. As an application of the proposed method, the effect of the dilatancy angle on the failure mechanism of a two‐sided embankment subjected to a high groundwater table is presented and compared with that of other solutions. Finally, the proposed formulation can be considered a basic formulation for further developments of SPH for saturated soils. Copyright © 2011 John Wiley & Sons, Ltd.     

闽粤台沿海北西西向最新构造带与大震构造背景

闽粤台沿海自台湾运动以来逐渐形成了多条北西西向隆起—拗陷的最新活动构造带,与已知的北东—北北东向隆起、拗陷带构成了区域性镶嵌构造格局。 研究区内除板块相互碰撞、俯冲及上地幔物质上涌形成大震构造背景外,莫霍面隆起或隆起断距大、低速层厚、地壳变薄、近两、三千年地表抬升差异活动显著以及台东近海有北西西向构造活动等,也都是发生大震的重要构造背景     

磁偶源频率测深视电阻率曲线的正演计算

磁偶源频率测深法是一种有效的地球物理勘探方法。多年来,人们对这种方法的正演理论和反演解释进行了研究。文中利用快速汉克尔数值滤波算法计算了层状介质上直立磁偶极子的电磁场响应以及频率测深视电阻率的振幅响应,这种计算方法与常用的数值积分算法相比,具有计算速度快、精度高等特点。同时详细地讨论了磁偶源频率测深的特点及视电阻率理论曲线的特征。