Contribution of Local Seismic Networks To The Regional Velocity Model of The Bohemian Massif

The routine location of regional seismic events using data from the Czech National Seismological Network (CNSN) is based on Pn, Pg, Sn, Sg phases. A simple velocity model derived from Kárník's (1953) interpretation of an earthquake in Northern Hungary in 1951 has hitherto been used. At present, numerous local seismic networks record and locate local events, which are occasionally recorded at regional distances as well. Due to the relatively small dimensions of local networks, hypocenters (and origin times) determined by a local network might be considered as nearly exact from the point of view of regional-scale CNSN. The comparison of common locations performed by CNSN and by a local network enables us to estimate the accuracy of CNSN locations, as well as to optimize a simple velocity model. The joint interpretation of the CNSN bulletin and the catalogues of four local seismic networks WEBNET, OSTRAVA, KLADNO and LUBIN produced a new ID velocity model. The most frequent epicentral error in this model is less than 5 km, and most foci lie up to 15 km from the true position. The performed analysis indicates bimodal distribution of Sn residuals.     

华北文安-蔚县-察哈尔右翼中旗剖面S波资料的地质解释

通过对文安—蔚县—察哈尔右翼中旗深地震测深剖面S波资料的处理解释 ,获得本区二维壳幔速度结构和波速比结构。该区的上、中地壳主要由花岗岩组成 ,整体呈脆性 ,其速度比γ值为 1 72左右 ;下地壳的γ值一般为 1 78;上地幔顶部的γ值在 1 82左右 ,表明下地壳与上地幔顶部整体呈塑性的特征。根据波组及γ值横向变化特征 ,推断了该区的几条深大断裂 ,结合本地区的地震活动 ,推测地震的孕育发生不仅与构造相关 ,而且与该区的岩石性质有关     

论基桩完整性检测技术

阐述桩的分类,产生缺陷的多重因素及完整性检测的必要性。论述一维杆件中反射波理论依据。激振及接收传感器是检测技术的关键;说明了反射波信号的频率解释和瞬态机械阻抗法的一致性并均以工程实例加以佐证。文中还论述了声波透射法检测基桩完整性的理论及依据,检测的判据,还给出了检测实例。介绍最新声CT技术及检测成果。     

Determination of 3-D Velocity Anomalies of the Nanbei Tectonic Zone of China Based on Local Earthquakes

In this paper, 3-D velocity images of the crust and upper mantle beneath the Nanbei tectonic zone of China are constructed using P-wave travel time residuals of earthquakes, with the data supplied by China's seismic networks and the International Seismic Centre.During the model parameterization in the tomographic inversion the interpolation function of grid node velocities is used as the space function of velocity, and the velocity function is allowed to be discontinuous. The difficulties caused by large memory demand and high computing cost in solving the system of equations are avoided by utilizing the least squares QR decomposition algorithm. Thus, the stability of the algorithm is ensured. Though resolution images are not derived in the inversion process based on the resolution theory of Backus and Gilbert, a covariance resolution method is put forward by the authors. The resolution analyses have proved the reliability of the image results. 3-D ray tracing is conducted to obtain the ray paths in a s     

Incipient Motion of Sediment Under Currents

Summarized in the paper are the author's studies on incipient motion of sediment in recent 40years.In addition to the forces of gravity,drag and lift,the cohesive force and the additional static pres-sure are important for fine particles.The relations between three stages of incipient motion are defined byuse of instantaneous velocity.Formulas for initial velocity and critical shear stress are given and overallverified by the author's and others'experimental data.     

Group Settling Velocity of Non-Cohesive Sediment Mixtures

Settling velocity is a fundamental parameter in sediment transport dynamics.For uniform Par-ticles,there are abundant formulas for calculation of their settling velocities.But in natural fields,sedi-ment consists of non-uniform particles.The interaction among particles is complex and should not be neg-lected.In this paper,based on the analysis of settling mechanism of non-cohesive and non-uniform parti-cles,a theoretical model to describe settling mechanism is proposed.Besides suspension concentration andupward turbulent flow caused by other particles,collision among particles is another main factor influ-encing settling velocity.By introducing the collision theory,equations of fall velocity before collision,colli-sion probability,and fall velocity after collision are established.Finally,a formula used to calculate the set-tling velocity of non-cohesive particles with wide grain gradation is presented,which agrees well with theexperimental data.     

一个边缘耀斑(后)环系速度场的近似计算

利用“多云模型”方法,从云南天文台二维多波段太阳光谱仪观测到的Ｈβ光谱资料中导出１９８９年８月１７日太阳西边缘的一个大的耀斑环系不同时间的视向速度场．为了解释观测速度场的主要特征,本文采用如下假设和近似：环内物质在太阳重力、磁场应力和环内气压梯度力联合作用下由环足沿螺旋磁力线上升运动．应用ＭＨＤ理论计算了它的理论速度场．通过两者的比较发现,计算出的速度场与第一时段的观测速度场基本相似,这似乎对耀斑物质蒸发模型提供了支持．     

An anomalous high-velocity layer at shallow crustal depths in the Narmada zone, India

The Narmada zone in central India is a zone of weakness that separates the region of Vindhyan (Meso-Neoproterozoic) deposition to the north from Gondwana (Permo-Carboniferous–lower Cretaceous) deposits to the south. The reinterpretation of analogue seismic refraction data, acquired during the early 1980s, using 2-D ray-tracing techniques reveals a basement (velocity 5.8–6.0 km s⁻¹ ) topography suggesting that the Narmada zone, bounded by the Narmada North and Narmada South faults is a region of basement uplift. A layer of anomalously high velocity (6.5–6.7 km s⁻¹ ) at depths between 1.5 and 9.0 km appears to be present in the entire region. Within the Narmada zone this layer occurs at shallower depths than outside the Narmada zone. At two places within the Narmada zone this layer is at a depth of about 1.5 km. This layer cannot be considered as the top of the lower crust because in this case it should have produced large positive gravity anomalies at the shallowest parts. Instead, these parts correspond to Bouguer gravity lows. Furthermore, lower crust at such shallow depths has not been reported from any other part of the Indian shield. Therefore, this layer is likely to represent the top of a high-velocity mafic body that has different thicknesses in different places.     

圆形断面管道非满流流速计算表达式

工程实际中,常需要计算某一充满度下管道非满流的流量及流速。目前大多数计算模型均采用水力半径作为反映过流断面形状及几何尺寸的特征参数。针对不同充满度的研究结果表明,这种类型模型的计算结果与真实的流动特性并不相符,尤其当水深接近管顶时。根据水动力学基本原理及试验研究手段,对圆形断面管道无压均匀流流量-充满度非单一性进行了探索,并提出了以流量作为形状特征参数的更为合理且简单实用的水流流速计算表达式。     

南海东北部下地壳高速层的成因探讨

通过对南海北部大陆边缘地壳结构分析,指出南海东北部存在下地壳高速层,大致分布在112°E~120°E,19°N~22°N的陆坡和拉张程度大的陆架地区,呈NEE向延伸,在海底地震仪剖面上最大的厚度有8km,向南海海盆方向减薄。通过对比综合分析认为,高速层物质组成是底侵作用形成的熔岩垫,由于伸展作用,南海海底扩张（30Ma）前后底侵作用形成了熔岩垫,并促使南海北部大陆边缘地壳抬升,导致区域性抬升剥蚀。