Geospatially based distributed rainfall‐runoff modelling for simulation of internal and outlet responses in a semi‐forested lower Himalayan watershed

This study presents a Geographic Information System (GIS)‐based distributed rainfall‐runoff model for simulating surface flows in small to large watersheds during isolated storm events. The model takes into account the amount of interception storage to be filled using a modified Merriam ( 1960 ) approach before estimating infiltration by the Smith and Parlange ( 1978 ) method. The mechanics of overland and channel flow are modelled by the kinematic wave approximation of the Saint Venant equations which are then numerically solved by the weighted four‐point implicit finite difference method. In this modelling the watershed was discretized into overland planes and channels using the algorithms proposed by Garbrecht and Martz ( 1999 ). The model code was first validated by comparing the model output with an analytical solution for a hypothetical plane. Then the model was tested in a medium‐sized semi‐forested watershed of Pathri Rao located in the Shivalik ranges of the Garhwal Himalayas, India. Initially, a local sensitivity analysis was performed to identify the parameters to which the model outputs like runoff volume, peak flow and time to peak flow are sensitive. Before going for model validation, calibration was performed using the Ordered‐Physics‐based Parameter Adjustment (OPPA) method. The proposed Physically Based Distributed (PBD) model was then evaluated both at the watershed outlet as well as at the internal gauging station, making this study a first of its kind in Indian watersheds. The results of performance evaluation indicate that the model has simulated the runoff hydrographs reasonably well within the watershed as well as at the watershed outlet with the same set of calibrated parameters. The model also simulates, realistically, the temporal variation of the spatial distribution of runoff over the watershed and the same has been illustrated graphically. Copyright © 2011 John Wiley & Sons, Ltd.     

深水锚在海床中复杂动力行为的分析模型

深水锚是深水系泊系统的核心组成,随着新概念和新技术在深水系泊领域的不断涌现和发展,深水锚在海床中的动力行为变得更为复杂,这给既有的分析方法带来极大的挑战。将深水锚的复杂动力行为视为拔出、旋转、嵌入三种典型行为的组合,分别给出明确定义并建立力学模型。提出最小力准则以确定锚的拔出、嵌入方向和旋转中心,该准则同时可作为拔出、旋转、嵌入行为是否发生的判定条件,从而建立起可以描述深水锚在海床中复杂动力行为的分析模型。为检验所提出的分析模型,将其应用于预测拖曳锚在海床中的嵌入运动轨迹,并与已有分析方法和离心机试验结果进行对比,验证了该分析模型的有效性。     

A method for assessing kinematic bending moments at the pile head

The conventional design methods for seismically loaded piles still concentrate in providing adequate resistance from the pile to withstand only the inertial bending moments generated from the oscillation of the superstructure, thus neglecting the effect of kinematic interaction between pile and soil. By contrast there has been extensive research on kinematic effects induced by earthquakes and a number of simplified methods are available for a preliminary evaluation of kinematic bending moments at the interface between two soil layers. Less attention has been paid to the effects of kinematic interaction at the pile‐head. The paper summarizes recent research work on kinematic response analysis of fixed‐head piles aimed at the performance evaluation of a piled foundation. Results from an extensive parametric study, undertaken by means of three‐dimensional FE analyses, suggest a new criterion to predict kinematic bending effects at the pile head, where the combination of kinematic and inertial effect may be critical. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of moving storms on attainment of equilibrium discharge

Although rainfall is assumed spatially uniform in conventional hydrological modelling for rainfall–runoff simulations, moving storms have been shown to have substantial influence on flow hydrographs. In this study, criteria for attainment of the equilibrium discharge from watersheds subjected to moving storms were examined. Non-linear numerical kinematic-wave models were developed to simulate runoff from an overland plane and from a V-shaped catchment. Dimensional analysis was applied to obtain the independent variables to be used as control factors in performing a series of numerical tests. The results indicate that, for storms moving downstream, runoff can attain equilibrium discharge even though the storm length is shorter than the watershed length and the rainfall duration is less than the time to equilibrium of the watershed for stationary uniform storms. The phenomenon of attainment of equilibrium discharge from watersheds subjected to moving storms is contradictory to conventional hydrologic design, which assumes the storm duration must equal the time to equilibrium to attain the maximum discharge. Copyright © 2007 John Wiley & Sons, Ltd.     

大蒲柴河地区韧性剪切带特征

大蒲河地区地处龙岗地块北缘活动带内，发育四条规模较大的韧性剪切带。韧性剪切带总体呈北西向平行带状展布，分别形成于不同时期，发育在不同的地质体中。其运动学特征以左旋斜滑为主，兼有左旋斜冲和右旋斜冲特征，均为地壳中部层次绿片岩相条件下动力变质作用的产物。     

Kinematic and Block Theory Analyses for Shiplock Slopes of the Three Gorges Dam Site in China

The granitic rock mass that exists in the shiplock region of the Three Gorges dam site contains a number of major discontinuities and about four sets of minor discontinuities. One hundred and thirty three major discontinuities have been mapped around the shiplock covering an area of 1740×600 m. These major discontinuities were used to perform rock slope kinematic and block theory analyses. Kinematic analyses were performed under the following two cases: (1) assuming all the mapped discontinuities cross the shiplock; (2) using only discontinuities that actually intersect the shiplock. Under case (1) and case (2) the shiplock faces in the proposed permanent shiplock region in fresh rock were found to be stable up to a cut slope of about 45° and 58°, respectively. Block theory was applied to identify different block types that exist on the shiplock faces and to estimate the maximum safe slope angles on the shiplock faces. The orientations of the major discontinuities that actually intersect the shiplocks were considered in this analysis. The total length of the shiplock (1750 m) was divided into 50 m segments. From the stereo-plots, the key blocks (Type I) and/or potential key blocks (Type II) were found for only five segments of the shiplock slopes. It was found that the dip of the cut slope should be less than about 60° to avoid creation of a key block on the proposed shiplock slopes. However, it is important to keep in mind that these conclusions are based on the kinematic analyses performed using only the major discontinuities. Further kinematic as well as kinetic analyses are recommended incorporating minor discontinuities, water forces, earthquake forces etc. before making the final conclusions about the maximum safe slope angle for the shiplock region.     

黄土坡面细沟侵蚀发生的临界条件

通过玻璃水槽试验和径流冲刷试验，研究了坡面径流的流速分布和坡面细沟侵蚀发生的临界条件。研究表明：径流在坡面上并非是以均匀流形式运动，而是以滚波的形式运动的，同时本文运用能量守恒原理分析了坡面土壤侵蚀率（Dr）与径流能耗（△E）之间的关系，建立了给定土壤条件下坡面土壤侵蚀率估算模型：Dr=0.0026（In△E-2）。结果表明坡面土壤侵蚀的发生具有一定的临界能量条件，当径流能耗大于7.38（J）时坡面开始有细沟侵蚀发生。     

动态平差概括模型与假设检验

建立了包括各种静态平差模型和线性动态平差模型的动态平差概括模型，推导了其主要求解公式。对动态平差概括模型下的形变检验和形变与粗差的可区分性检验作了公式推导和理论分析，丰富了形变监测数据处理理论。     

Fault kinematic and Plio-Quaternary paleostress evolution of the Bakırçay Basin,Western Turkey

ABSTRACT

At the end of the Cenozoic, western Turkey was fragmented by intense intra-continental tectonic deformation resulting in the formation of two extensional areas: a transtensional pull-apart basin systems in the northwest, and graben systems in the central and southwest areas. The question of the connection of this Late Cenozoic extensional tectonics to plate kinematics has long been an issue of discussion. This study presents the results of the fault slip data collected in Bak?rçay Basin in the west of Turkey and addresses changes in the direction of extensional stresses over the Plio-Quaternary. Field observations and quantitative analysis show that Bak?rçay Basin is not a simple graben basin that has evolved during a single phase. It started as a graben basin with extensional regime in the Pliocene and was transformed into a pull-apart basin under the influence of transtensional forces during the Quaternary. A chronology of two successive extensional episodes has been established and provides reasoning to constrain the timing and location of subduction-related back-arc tectonics along the Aegean region and collision-related extrusion tectonics in Turkey. The first NW–SE trending extension occurred during the Pliocene extensional phase, characterized by slab rollback and progressive steepening of the northward subduction of the African plate under the Anatolian Plate. Western Turkey has been affected, during the Middle Quaternary, by regional subsidence, and the direction of extension changed to N–S, probably in relation with the propagation of the North Anatolian Fault System. Since the Late Quaternary, NE–SW extension dominates northwest Turkey and results in the formation and development of elongated transtensional basin systems. Counterclockwise rotation of Anatolian block which is bounded to the north by the right-lateral strike-slip North Anatolian Fault System, accompanies to this extensional phase.     

On strong ground motion synthesis with k −2 slip distributions

This study deals with the methodical aspects of k ^–2(Bernard et al., 1996) kinematic strong motions modelling: (1) it is shown how to incorporate the k-dependent rise time for 2D fault geometry in the strong motion synthesis according to the representation theorem, (2) it is suggested how to produce realistic k ^–2 slip models including asperity(ies), (3) modifications are introduced concerning the typeof used slip velocity function and the corner wave number in the slip distribution. High frequency effects of these generalized models are discussed.It is shown that, assuming the rise time proportional to the spatial slip wavelength at high wave numbers, the spectral decay of displacement at frequencies higher than the corner frequency is given just by the decay ofthe slip distribution spectrum, regardless of the type of slip velocity function. It is shown numerically that this model provides -squared source spectrum even in a vicinity of a 2D normal fault buried in 1D structure, which is an agreement with previous studies.