从江翁浪金矿中的构造变形特征研究

从江翁浪金矿是一个受构造控制明显的金矿床,金矿主要富集在受顺层剪切控制的强变形带内。本文通过对翁浪金矿控矿构造中变形岩石的宏观和微观变形特征分析,得出研究区顺层剪切带的运动学特征为逆冲型剪切,控制金矿产出的强变形带以韧性变形为主的认识。     

GPS-RTK监测大范围地面沉降的试验研究

在各种不同监测距离和监测时段,采用GPS-RTK测量模式对大范围地面沉降进行了现场监测。通过对试验结果的分析研究,获取了GPS-RTK监测大范围地面沉降时距离和时间的长短对监测结果影响的一些重要技术参数,这对GPS- RTK测量模式应用于实际地面沉降监测以及GPS-RTK的测量立法具有重要参考意义。     

Mean Structure of Tropical Cyclones Making Landfall in Mainland China

The mean kinematic and thermodynamic structures of tropical cyclones （TCs） making landfall in main-land China are examined by using sounding data from 1998 to 2009. It is found that TC landfall is usually accompanied with a decrease in low-level wind speed, an expansion of the radius of strong wind, weakening of the upper-level warm core, and drying of the mid-tropospheric air. On average, the warm core of the TCs dissipates 24 h after landfall. The height of the maximum low-level wind and the base of the stable layer both increase with the increased distance to the TC center;however, the former is always higher than the latter. In particular, an asymmetric structure of the TC after landfall is found. The kinematic and thermodynamic structures across various areas of TC circulation diff er, especially over the left-front and right-rear quadrants （relative to the direction of TC motion）. In the left-front quadrant, strong winds locate at a smaller radius, the upper-level temperature is warmer with the warm core extending into a deep layer, while the wet air occupies a shallow layer. In the right-rear quadrant, strong wind and wet air dwell in an area that is broader and deeper, and the warmest air is situated farther away from the TC center.     

动态定位自适应滤波解的性质

自适应抗差滤波具有控制观测异常及状态方程信息异常干扰的能力。着重研究自适应滤波解的性质。首先推导了动态自适应滤波与经典Kalman滤波解的解差，继而给出了状态向量估值的数学期望和均方误差，并分析了在自适应因子调控下解的偏差和均方误差的变化规律。由状态解向量的数学期望和均方误差的表达式可以看出，自适应因子能够控制状态异常对状态估值和均方误差的影响。     

自适应换站算法及其在长距离机载GPS动态相对定位中的应用

提出采用＂自适应换站＂法来解决单基线处理模式难以满足长距离动态定位的问题。该方法的主要思想是：整个解算过程始终保持单基线的动态定位模式,当发现流动站与原参考站间的距离大于流动站与其他参考站间的距离时,自动更换周围最近的参考站作为新参考站;对换站前后的数据设置一定时间的重叠段,利用等价消参法将换站前后的数据进行严格的自适应融合,以保持整个解算过程的连续性。通过对实测机载数据的解算,证明该方法不仅可以克服因载体飞行距离过远而导致的定位精度下降,而且能够避免因换站所引起的前后解的不连续,计算结果表明该方法的定位精度约为2 cm。     

Accuracy of kinematic wave and diffusion wave approximations for time-independent flows

Errors in the kinematic wave and diffusion wave approximations for time-independent (or steady-state) cases of channel flow were derived for three types of boundary conditions: zero flow at the upstream end, and critical flow depth and zero depth gradient at the downstream end. The diffusion wave approximation was found to be in excellent agreement with the dynamic wave approximation, with errors in the range 1–2% for values of KF (? 7.5), where K is the kinematic wave number and F₀ is the Froude number. Even for small values of KF (e.g. KF²₀ = 0.75), the errors were typically less than 15%. The accuracy of the diffusion wave approximation was greatly influenced by the downstream boundary condition. The error of the kinematic wave approximation was found to be less than 13% in the region 0.1 ? x ? 0.95 for KF = 7.5 and was greater than 30% for smaller values of KF (? 0.75). This error increased with strong downstream boundary control.     

Numerical modelling of seismic slope failure using MPM

The Finite Element Method (FEM) is widely used in the simulation of geotechnical applications. Owing to the limitations of FEM to model problems involving large deformations, many efforts have been made to develop methods free of mesh entanglement. One of these methods is the Material Point Method (MPM) which models the material as Lagrangian particles capable of moving through a background computational mesh in Eulerian manner. Although MPM represents the continuum by material points, solution is performed on the computational mesh. Thus, imposing boundary conditions is not aligned with the material representation. In this paper, a non-zero kinematic condition is introduced where an additional set of particles is incorporated to track the moving boundary. This approach is then applied to simulate the seismic motion resulting in failure of slopes. To validate this simulation procedure, two geotechnical applications are modelled using MPM. The first is to reproduce a shaking table experiment where the results of another numerical method are available. After validating the present numerical scheme for relatively large deformation problem, it is applied to simulate progression of a large-scale landslide during the Chi-Chi earthquake of Taiwan in which excessive material deformation and transportation is taking place.     

新疆准噶尔含煤盆地基本构造格架与认识

基于盆地煤田构造与赋煤特征的综合分析,辅以准噶尔盆地西北、东北、东部和南部典型构造剖面的解析分析,厘清了准噶尔盆地的基本构造形态,呈现出如下规律:一是准噶尔现今构造格局于喜山运动中晚期定格,长期处于近南北向构造挤压应力场环境,总体具隆坳相间、南北分带、东西分块的构造格局;二是盆缘四周构造变形强烈,向盆内逐渐减弱且层次变浅,整体呈"环带"构造,反映出准噶尔盆地主体受控于周缘造山带和自盆缘向盆内挤压应力场的动力学、运动学和几何学特征;三是准噶尔盆地大规模聚煤作用是在早中侏罗世短暂的引张或弱挤压的区域构造应力场背景下完成的;四是准噶尔盆地周缘推覆带为可能的煤炭资源勘查开发远景区。     

一种联合载波相位观测值的GPS/BDS滤波导航算法

提出了一种基于历元间相位差分的GPS/BDS单机实时动态定位算法。该方法采用历元间载波相位差分数据准确计算出载体的位置变化量;并以此描述载体的运动状态变化,建立动态定位滤波模型的状态方程。同时以历元间载波相位差分数据与伪距数据作为主要观测值,采用扩展Kalman滤波实时估计载体的位置和钟差。采用自主编制的软件对静态与车载GPS/BDS实测数据进行处理,结果表明:采用该方法,定位结果精度优于传统的标准单点定位算法与载波相位平滑伪距算法;而且算法具有较好的稳定性,与载体的运动状态无关。     

从东亚大陆中、新生代的运动探讨南海的形成演化

根据古地磁、古生物地理和地质构造分析，东亚大陆在中生代中晚期至新生代初期大幅度向南运动；新生代中晚期以来大幅度向北运动。运动学模式发生巨大转变的时期，大致在始新世与渐新世之间，这与全球运动学和动力学发生的重大改组的时间相一致。由此提出大陆后退这一新的南海形成演化的运动学模式。