Seafloor spreading, obduction and triple junction tectonics of the Mineoka Ophiolite, Central Japan

The Tertiary Mineoka ophiolite occurs in a fault zone at the intersection of the Honshu and Izu forearcs in central Japan and displays structural evidence for three major phases of deformation: normal and oblique-slip faults and hydrothermal veins formed during the seafloor spreading evolution of the ophiolite at a ridge-transform fault intersection. These structures may represent repeated changes in differential stress and pore-fluid pressures during their formation. The second series of deformation is characterized by oblique thrust faults with Riedel shears and no significant mineral veining, and is interpreted to have resulted from transpressional dextral faulting during the obduction of the ophiolite through oblique convergence and tectonic accretion. This deformation occurred at the NW corner of a TTT-type (trench–trench–trench) triple junction in the NW Pacific rim before the middle Miocene. The third series of deformation of the ophiolite is marked by contractional and oblique shear zones, Riedel shears, and thrust faults that crosscut and offset earlier structures, and that give the Mineoka fault zone its lenticular (phacoidal) fabric at all scales. This deformation phase was associated with the establishment and the southward migration of the TTT Boso triple junction and with the kinematics of oblique subduction and forearc sliver fault development. The composite Mineoka ophiolite hence displays rocks and structures that evolved during its complex geodynamic history involving seafloor spreading, tectonic accretion, and triple junction evolution in the NW Pacific Rim.     

海南博螯沿岸地貌与人类活动的潜在影响

The Boao coastal system along the eastern coast of Hainan Island is a dynamic delta-tidal inlet-barrier formed during the late Holocene. The delta developed inside a shallow lagoon barred by a sandy barrier with a narrow, shallow tidal inlet opening. Two major distributary channels separated by small islands characterize the delta. The lagoon is silting up receiving and trapping sediments from both the river and, in minor measure during storms, through the tidal inlet opening and barrier washovers. The barrier at the tidal inlet is highly dynamic and changes its form, accreting (migrating spit) against the inlet during fair-weather conditions and being eroded during storms and river floods.The delta has almost completely filled the lagoon and major concerns exist on the effect that ongoing large development plans may have on the environment. These concerns include the effect on floods and rate of siltation once banks of the islands have been stabilized and floodwater and sediment load are impeded from spreading over the lowlands, and the effect of increasing pollutant loads from the new facilities on the ecosystems of the increasingly restricting lagoon water and on the seashores.     

热屏障井对地下水源热泵换热影响模拟

对于场地受限的地下水源热泵项目,随着系统运行时间的增加易引发热贯通现象进而降低机组运行效率。地下水源热泵设计中,在抽灌水井连线间布设热屏障井可改变地下水流场,降低热量在抽灌井间的运移速度,有利于延长热贯通发生时间并缓解热贯通程度。通过构建地下水换热模型,模拟计算夏季制冷工况条件下36组热泵运行场景,分析了热屏障井的位置,过滤管长度及回灌量对热贯通和含水层温度场的影响规律。结果表明:热屏障井回灌量的增加有利于提升热屏障效果,但提升幅度随回灌量的增加逐渐减弱;最大水位降深值随着热屏障井回灌量的增加呈线性增长;增加热屏障井滤管长度可提升热屏障效果,提升效果随屏障井回灌量的增加逐渐增强。通过模型多周期、长时间模拟计算发现,热屏障井的运行可促使回灌的冷热量集中在回灌井一侧,对于采用冬夏季抽灌井交换运行模式的热泵系统,可充分利用含水层储能,提升机组运行效率。     

Indian Ocean Dipole-related Predictability Barriers Induced by Initial Errors in the Tropical Indian Ocean in a CGCM

利用GFDL CM2p1模式, 本文探讨了初始海温误差对印度洋偶极子(IOD)事件可预报性的影响. 当热带印度洋存在初始海温误差时, IOD预报发生了冬季预报障碍(WPB)现象和夏季预报障碍(SPB)现象. WPB发生与否与正IOD事件发展位相冬季的厄尔尼诺-南方涛动(ENSO)有关. 即当冬季存在ENSO时, IOD预测不发生WPB现象, 反之亦然. 相比之下, SPB发生与否和ENSO没有必然联系. 此外, 进一步探讨了最容易导致SPB现象的初始海温误差的主要模态, 指出该模态在热带印度洋上表现为东-西偶极子型, 这和前人研究中最容易导致WPB现象的初始海温误差模态相似. 当在热带印度洋上叠加这些初始海温误差后, 热带太平洋上出现了海表温度异常和风场异常, 进而通过大气桥和印尼贯穿流的作用影响热带印度洋, 使之在夏季出现了东-西偶极子型的海表温度异常, 该异常在Bjerknes作用下快速发展, 加强, 最终导致SPB现象的发生.     

赤道东印度洋和孟加拉湾障碍层厚度的季节内和准半年变化

利用2002—2015年ARGO网格化的温度、盐度数据, 结合卫星资料揭示了赤道东印度洋和孟加拉湾障碍层厚度的季节内和准半年变化特征, 探讨了其变化机制。结果表明, 障碍层厚度变化的两个高值区域出现在赤道东印度洋和孟加拉湾北部。在赤道区域, 障碍层同时受到等温层和混合层变化的影响, 5—7月和11—1月受西风驱动, Wyrtki急流携带阿拉伯海的高盐水与表层的淡水形成盐度层结, 同时西风驱动的下沉Kelvin波加深了等温层, 混合层与等温层分离, 障碍层形成。在湾内, 充沛的降雨和径流带来的大量淡水产生很强的盐度层结, 混合层全年都非常浅, 障碍层季节内变化和准半年变化主要受等温层深度变化的影响。上述两个区域障碍层变化存在关联, 季节内和准半年周期的赤道纬向风驱动的波动过程是它们存在联系的根本原因。赤道东印度洋地区的西风(东风)强迫出向东传的下沉(上升)的Kelvin波, 在苏门答腊岛西岸转变为沿岸Kelvin波向北传到孟加拉湾的东边界和北边界, 并且在缅甸的伊洛瓦底江三角洲顶部(95°E, 16°N)激发出向西的Rossby波, 造成湾内等温层深度的正(负)异常, 波动传播的速度决定了湾内的变化过程滞后于赤道区域1~2个月。     

南海中部海域障碍层特征及其形成机制

南海中部海域(10°~19°N,108°~122°E)存在显著的季节变化的障碍层.障碍层发生概率夏季最大(52.8%),秋季次之(41.0%),春季最小(10.5%).夏季(2000年8~9月)障碍层最显著,平均厚度约为14.2m;除114°E以东、吕宋岛以西海域为障碍层的多发区外,中南半岛东南海域(12°~14°N,110°~114°E)也存在显著的障碍层;春季(1998年4~6月)和秋季(1998年12月)障碍层平均厚度分别为6.8和11.2m,障碍层多位于114°E以东、吕宋岛以西海域.此外,吕宋岛以西海域(12°~16°N,116°~120°E)及中沙和西沙群岛附近(16°~18°N,110°~116°E)海域障碍层年发生几率超过20%,相对而言,其他海域障碍层年发生几率偏小.降水机制和层结机制分别是南海中部海域春、夏季和秋季障碍层形成的主要原因.其中,降水机制及东南向的Ekman平流较好的解释了春、夏季吕宋岛以西附近海域成为障碍层多发区的原因;此外,强降水是夏季中南半岛东南海域(12°~14°N,110°~114°E)障碍层产生的关键,反气旋涡(暖涡)有助于形成更强的障碍层,上升流对障碍层的影响有待进一步研究.     

赤道东印度洋和孟加拉湾障碍层厚度的年际变化及其影响机制

Interannual variability(IAV) in the barrier layer thickness(BLT) and forcing mechanisms in the eastern equatorial Indian Ocean(EEIO) and Bay of Bengal(BoB) are examined using monthly Argo data sets during 2002–2017. The BLT during November–January(NDJ) in the EEIO shows strong IAV, which is associated with the Indian Ocean dipole mode(IOD), with the IOD leading the BLT by two months. During the negative IOD phase, the westerly wind anomalies driving the downwelling Kelvin waves increase the isothermal layer depth(ILD). Moreover, the variability in the mixed layer depth(MLD) is complex. Affected by the Wyrtki jet, the MLD presents negative anomalies west of 85°E and strong positive anomalies between 85°E and 93°E. Therefore, the BLT shows positive anomalies except between 86°E and 92°E in the EEIO. Additionally, the IAV in the BLT during December–February(DJF) in the BoB is also investigated. In the eastern and northeastern BoB, the IAV in the BLT is remotely forced by equatorial zonal wind stress anomalies associated with the El Ni?o-Southern Oscillation(ENSO). In the western BoB, the regional surface wind forcing-related ENSO modulates the BLT variations.     

1998年5-6月南海上混合层、温跃层 不同定义的比较

本文根据混合层和温跃层的两种不同定义，对1998年南海南北部和西太平洋混合层和温跃层的定点观测资料进行了计算和分析，比较了不同定义确定的混层，温跃层的共同点和差异。在此基础上，得出南海和西太平洋的障碍层厚度。     

Improving performances of ITO/GaP contact on AlGaInP light-emitting diodes

In this paper AlGaInP light emitting diodes with different types of electrodes: Au/Zn/Au-ITO Au/Ti-ITO Au/Ge/Ni-ITO and Au-ITO are fabricated. The photoelectricity properties of those LEDs are studied. The results show that the Au/Zn/Au electrode greatly improves the performance of LEDs compared with the other electrodes. Because the Au/Zn/Au electrode not only forms a good Ohmic contact with indium tin oxide (ITO), but also reduces the specific contact resistances between ITO and GaP, which are 1.273×10^-6 Ω · cm² and 1.743×10^-3 Ω ·cm² between Au/Zn/Au-ITO and ITO-GaP respectively. Furthermore, the textured Zn/Au-ITO/Zn electrode is designed to improve the performances of LEDs, reduce the forward-voltage of the LED from 1.93 to 1.88 V, and increase the luminous intensity of the LEDs from 126 to 134 mcd when driven at 20 mA.     

Parameter analysis for gate metal—oxide—semiconductor structures of ion-implanted 4H silicon carbide metal—semiconductor field-effect transistors

From the theoretical analysis of the thermionic emission model of current--voltage characteristics, this paper extracts the parameters for the gate Schottky contact of two ion-implanted 4H-SiC metal--semiconductor field-effect transistors (sample A and sample B for three and four times multiple ion-implantation channel region respectively) fabricated in the experiment, including the ideality factor, the series resistance, the zero-field barrier height, the interface oxide capacitance, the interface state density distribution, the neutral level of interface states and the fixed space charge density. The methods to improve the interface of the ion-implanted Schottky contact are given at last.