Comparing grain size distribution of sediment and original soil under raindrop detachment and raindrop-induced and flow transport mechanism

The grain size distribution (GSD) of sediment in comparison with the original soil GSD is discussed under different slopes (5, 15 and 25%) and rainfall intensities (30, 60 and 90 mm h^–1 with respective duration of 30, 15 and 10 min) but identical runoff (15 mm). The sediment quantification was carried out by raindrop-induced flow transport (RIFT) or/and transport by flow (FT) using a rainfall simulator and a 6 × 1 m² erosion plot and a silt loam. The results show a high degree of enrichment for size classes of 2–4 and 4–8 μm and a high degree of depletion for size classes of >63 μm under different slopes and rainfall intensities. In addition, the results show that the experimental enrichment ratio (ER) for particle size <16 μm under different slopes and rainfall intensities was greater than 1, while the ER for particle size >32 μm was less than 1.     

Effect of thickness of planar nozzles on erosion depth of levee soils subjected to plunging water

In this study, the effect of the thickness of a planar jet on the erosion depth when the jet impinges on a surface composed of cohesive soil was analytically and numerically evaluated. The results showed that the erosion depth was practically independent of the nozzle thickness for erosion depths shallower than the potential core length (i.e. the region of the jet in which the central flow velocity is the same as the nozzle velocity). The relation between nozzle thickness and erosion depth was non-linear with continuously variable slope for erosion depths deeper than the potential core length. Finally, the relation was approximately linear when the erosion depth converged to the equilibrium erosion depth. The findings of this study indicate that direct and fast prediction of the erosion depth in the field is possible using the data from a small scale soil erosion test with similar flow velocities.     

城郊"水土流失带"的结构、特征与治理模式研究

从生态学和地理学的角度提出“水土流失带”的概念,及其在城市边缘地区的分布,剖析了它的空间结构,物质组成结构,指出其域界范围,宽度、“环状”;分布,垂直结构特征及物质组成结构的多元性。     

现代黄河三角洲海岸演化研究

通过不同年代海图或地形图对比、不同年代的卫片对比、野外地质调查、不同年代潮滩剖面测量及对比等,研究了现代黄河三角洲海岸带不同时期的冲淤速率及其发展演化趋势。黄河尾闾1996年6月进行人工改道向东流入海,开始堆积现代黄河三角洲的第11个叶瓣,推测这次改道可能是第3个亚三角洲形成的开始,使黄河三角洲的发展呈第一、第二、第三亚三角洲逐次向东偏北方向推进之势。现代黄河三角洲及莱州湾海岸带可分成7个冲淤状态不同的岸段：大口河至顺江沟岸段为相对稳定海岸段;顺江沟至挑河口岸段为弱蚀退岸段;挑河口至106站岸段为强蚀退岸段;106站至孤东油田段为石堤护岸强制稳定海岸段;孤东油田至大汶流海堡岸段为强淤进岸段：大汶流海堡至淄脉沟岸段为弱淤进海岸段;淄脉沟口至胶莱河口岸段为稳定海岸段。预测10a内,各海岸段的冲淤状态基本保持不变,但各海岸段的蚀退或淤进速率有逐渐减缓之趋势。人类活动对岸线的变迁有明显影响。     

The effect of riparian tree roots on the mass‐stability of riverbanks

Plants interact with and modify the processes of riverbank erosion by altering bank hydrology, flow hydraulics and bank geotechnical properties. The physically based slope stability model GWEDGEM was used to assess how changes in bank geotechnical properties due to the roots of native Australian riparian trees affected the stability of bank sections surveyed along the Latrobe River. Modelling bank stability against mass failure with and without the reinforcing effects of River Red Gum (Eucalyptus camaldulensis) or Swamp Paperbark (Melaleuca ericifolia) indicates that root reinforcement of the bank substrate provides high levels of bank protection. The model indicates that the addition of root reinforcement to an otherwise unstable bank section can raise the factor of safety (F _s) from F _s = 1·0 up to about F _s = 1·6. The addition of roots to riverbanks improves stability even under worst‐case hydrological conditions and is apparent over a range of bank geometries, varying with tree position. Trees growing close to potential failure plane locations, either low on the bank or on the floodplain, realize the greatest bank reinforcement. Copyright © 2000 John Wiley & Sons, Ltd.     

Measuring drop size distribution and kinetic energy of rainfall using a force transducer

The relatively high cost of commercially available raindrop spectrometers and disdrometers has inhibited detailed and intensive research on drop size distribution, kinetic energy and momentum of rainfall which are important for understanding and modelling soil erosion caused by raindrop detachment. In this study, an approach to find the drop size distribution, momentum and kinetic energy of rainfall using a relatively inexpensive device that uses a piezoelectric force transducer for sensing raindrop impact response is introduced. The instrument continuously and automatically records, on a time‐scale, the amplitude of electrical pulses produced by the impact of raindrops on the surface of the transducer. The size distribution of the raindrops and their respective kinetic energy are calculated by analysing the number and amplitude of pulses recorded, and from the measured volume of total rainfall using a calibration curve. Simultaneous measurements of the instrument, a rain gauge and a dye‐stain method were used to assess the performance of the instrument. Test results from natural and simulated rainfalls are presented. Copyright © 2000 John Wiley & Sons, Ltd.     

The use of caesium‐137 to estimate agricultural erosion on steep slopes in a tropical watershed

The estimation of erosion and sediment delivery rates in tropical mountain watersheds is difficult and most of the methods widely used for estimating soil erosion over large areas have serious limitations. The ¹³⁷Cs approach has potential for quantifying soil erosion because it can provide retrospective estimates of long‐term (since 1963) net sediment redistribution relatively quickly. Despite its great potential, ¹³⁷Cs has not yet been used in an extensive, reconnaissance level survey of erosion in complex tropical mountain environments. The objective of this study was to examine the applicability of the ¹³⁷Cs method to estimate erosion on steep tropical agricultural lands (23 to 80% slopes) in the Nizao watershed, a humid, tropical mountain area of the Dominican Republic. In this study we (i) examine the variation of ¹³⁷Cs in ten reference sites—eight coffee groves and two forested sites—and (ii) estimate erosion from 14 cultivated fields. The soil pool of ¹³⁷Cs ranged from to 150 to 192 mBq cm⁻² on reference sites with minimal erosion. Variability among reference sites was less than expected for such complex mountain terrain. The variability within coffee and forested reference (average CV=28%) sites was similar to the variability found on grassland and forested reference sites in the temperate zone. The estimated annual soil loss from 14 sampled fields ranged from 6 to 61 t ha⁻¹ year⁻¹ with an overall mean of 26 t ha⁻¹ year⁻¹. Overall, the soil erosion estimates found using the ¹³⁷Cs method were much lower than those often assumed for such steep tropical hillsides. These erosion estimates account for soil loss since 1963 only and it seems likely that soil losses may have been much higher in earlier decades immediately after initial forest clearing earlier in the 20th century. Copyright © 2000 John Wiley & Sons, Ltd.     

Sensitivity analysis of EUROSEM using Monte Carlo simulation I: hydrological,soil and vegetation parameters

Knowledge about model uncertainty is essential for erosion modelling and provides important information when it comes to parameterizing models. In this paper a sensitivity analysis of the European soil erosion model (EUROSEM) is carried out using Monte Carlo simulation, suitable for complex non‐linear models, using time‐dependent driving variables. The analysis revealed some important characteristics of the model. The variability of the static output parameters was generally high, with the hydrologic parameters being the most important ones, especially saturated hydraulic conductivity and net capillary drive followed by the percentage basal area for the hydrological and vegetation parameters and detachability and cohesion for the soil erosion parameters. Overall, sensitivity to vegetation parameters was insignificant. The coefficient of variation for the sedigraph was higher than for the hydrograph, especially from the beginning of the rainstorm and up to the peak, and may explain difficulties encountered when trying to match simulated hydrographs and sedigraphs with observed ones. The findings from this Monte Carlo simulation calls for improved within‐storm modelling of erosion processes in EUROSEM. Information about model uncertainty will be incorporated in a new EUROSEM user interface. Copyright © 2000 John Wiley & Sons, Ltd.     

Soil erosion modelled with USLE and PESERA using QuickBird derived vegetation parameters in an alpine catchment

The focus of soil erosion research in the Alps has been in two categories: (i) on-site measurements, which are rather small scale point measurements on selected plots often constrained to irrigation experiments or (ii) off-site quantification of sediment delivery at the outlet of the catchment. Results of both categories pointed towards the importance of an intact vegetation cover to prevent soil loss. With the recent availability of high-resolution satellites such as IKONOS and QuickBird options for detecting and monitoring vegetation parameters in heterogeneous terrain have increased. The aim of this study is to evaluate the usefulness of QuickBird derived vegetation parameters in soil erosion models for alpine sites by comparison to Cesium-137 (Cs-137) derived soil erosion estimates. The study site (67 km²) is located in the Central Swiss Alps (Urseren Valley) and is characterised by scarce forest cover and strong anthropogenic influences due to grassland farming for centuries. A fractional vegetation cover (FVC) map for grassland and detailed land-cover maps are available from linear spectral unmixing and supervised classification of QuickBird imagery. The maps were introduced to the Pan-European Soil Erosion Risk Assessment (PESERA) model as well as to the Universal Soil Loss Equation (USLE). Regarding the latter model, the FVC was indirectly incorporated by adapting the C factor. Both models show an increase in absolute soil erosion values when FVC is considered. In contrast to USLE and the Cs-137 soil erosion rates, PESERA estimates are low. For the USLE model also the spatial patterns improved and showed “hotspots” of high erosion of up to 16 t ha⁻¹ a⁻¹. In conclusion field measurements of Cs-137 confirmed the improvement of soil erosion estimates using the satellite-derived vegetation data.     

The influence of geomorphological position and vegetation cover on the erosional and hydrological processes on a Mediterranean hillslope

Soil erosion and runoff rates are assumed to be highly dependent on slope position. However, little knowledge exists about the hydrogeomorphological processes at the pedon scale that support this idea. In order to assess the hydrological and erosional behaviour of soils at different slope positions, simulated rainfall experiments (55 mm was applied during one hour) were carried out on a south-facing slope with underlying limestone in south-east Spain. In the mean terms, the erosion rates (9 g m² hr⁻¹) and the runoff coefficients (12%) were very low at the scale of measurement (0·25 m²). The slope position does not affect erosion rates when the measurements are carried out under extreme dry conditions during summer. The low runoff rates found in summer under thunderstorms of high intensity (5 year return period) and the runon into surfaces with higher infiltration rates resulted in no detectable direct surface runoff (Hortonian) at the slope scale. This implies that erosion as a consequence of surface overland flow will only take place during events of high magnitude (55 mm hr⁻¹) and low frequency (>5 years). Vegetation is the most important factor determining the soil erosion and runoff rates within the slope. © 1998 John Wiley & Sons, Ltd.