基于3S技术和USLE的深圳市茜坑水库流域土壤侵蚀强度预测研究

基于RS、GPS和GIS(3S技术)的集成提出了USLE 6大因子的算法,在建立的专题地理信息数据库基础上,运用USLE对深圳市茜坑水库流域的土壤侵蚀强度进行预测和估算.结果表明:整个流域90.5%的区域土壤流失强度为中度以下,强度侵蚀以上的区域虽然仅占整个流域面积的9.5%,但是年土壤侵蚀量达到了整个流域土壤侵蚀量的49.4%.流域土壤侵蚀强度和植被覆盖情况明显相关,茜坑水库流域的东北山区部分是整个流域的严重侵蚀区.研究证明:在3S技术集成支持下,采用USLE对流域的土壤流失强度进行预测和估算的方法具有直观、方便、快捷的优点,成果能充分满足小流域水土保持工作的需要.     

EFFECTS OF RIVER NETWORK WORKS AND SOIL CONSERVATION MEASURES ON RESERVOIR SILTATION

Knowledge of the morphological dynamics of a water course is essential for management of reservoir siltation. With an example of sedimentation in a reservoir in Basilicata, Italy, this paper demonstrates the effect on reservoir siltation of the hydraulic works, which are aimed to reduce sediment transport along the fluvial network and to prevent part of the sediment discharge from reaching the lake. The effect depends on the river type and on the the geological features of river basin slopes. The paper also shows how mass erosion can significantly contribute to development of reservoir siltation. Finally, preliminary results are provided about the time needed for river training works to be effective.     

Field‐based and spectral indicators for soil erosion mapping in semi‐arid mediterranean environments (Coastal Cordillera of central Chile)

The Coastal Cordillera of central Chile is naturally sensitive to soil erosion due to moderate to steep slopes, intense winter rains when the vegetation cover is scarce, and deeply weathered granitic rocks. In 1965, 60 per cent of its surface was moderately to very severely eroded. Today this process is still largely active, but no data are currently available to evaluate the real extent, distribution and severity of soil degradation on a regional scale. This information is vital to support efficient soil conservation plans. A multi‐scale approach was implemented to produce regional land degradation maps based on remote sensing technologies. Fieldwork has shown that the surface colour or ‘redness’ and the density of coarse fragments are pertinent erosion indicators to describe a typical sequence of soil degradation in the context of mediterranean soil developed on granitic materials and micaschists. Field radiometric experiments concluded that both factors influence the reflectance of natural surfaces and can be modelled using radiometric indices accessible from most satellites operating in the optical domain, i.e. redness index and brightness index. Finally the radiometric indices were successfully applied to SPOT images to produce land degradation maps. Only broad classes of erosion status were discriminated and the detection of the degradation processes was only possible when most of the fertile layer had already been removed. This technology provides decision‐making information required to develop regional soil conservation plans and to prioritize actions between catchment areas, especially in vast inter‐tropical regions where spatialized data are not always readily available. Copyright © 2006 John Wiley & Sons, Ltd.     

Wind erosion of blanket peat during a short period of surface desiccation (North Pennines,Northern England)

Strong winds are a characteristic feature of UK upland areas. Despite this, understanding of aeolian processes in upland environments of the UK is limited. This paper presents direct measurements and observations of blanket peat erosion by wind action during a two week period of desiccation in the North Pennines, Northern England. A circular configuration of mass flux sediment samplers was used to collect peat eroded by wind action from 16 cardinal compass directions. Meteorological conditions (wind speed, wind direction, precipitation and temperature) were recorded by an automatic weather station set up adjacent to the site. Surface desiccation led to peat crust erosion and dust deflation. During short (≤1 hour) periods of precipitation, wind‐driven rainfall also caused erosion. Typically, dust flux rates were up to two orders of magnitude lower than recorded during periods of sustained wet weather. Measurements demonstrate the hitherto unreported rapid switch in process regime between wind‐driven rainfall and dry blow deflation in blanket peat environments. Dry blow processes of blanket peat erosion may become more important in UK upland areas if climate change promotes more frequent surface desiccation. Copyright © 2006 John Wiley & Sons, Ltd.     

Study of the erosion rates in the upper Maracujá Basin (Quadrilátero Ferrífero/MG,Brazil) by the in situ produced cosmogenic 10Be method

The present work quantifies the erosive processes in the two main substrates (schists–phyllites and granites–gneisses) of the upper Maracujá Basin in the Quadrilátero Ferrífero/MG, Brazil, a region of semi‐humid tropical climate. Two measuring methods of concentration were used: (i) in situ produced ¹⁰Be in quartz veins (surface erosion rates) and (ii) ¹⁰Be in fluvial sediments (basin erosion rates). The results confirm that (i) erosion tends to be more aggressive close to the headwaters than in the lower parts of the basin and (ii) the region is now affected by dissection. Copyright © 2006 John Wiley & Sons, Ltd.     

The effect of single vegetation elements on wind speed and sediment transport in the Sahelian zone of Burkina Faso

Soil loss caused by wind erosion is a widespread phenomenon in the Sahelian zone of West Africa. According to Sahelian farmers, scattered vegetation standing in amongst the crop has the potential for a wind erosion control strategy. This study was conducted to study the effect of single vegetation elements on the pattern of average wind speed and sediment transport. This was done by two experiments that were carried out during the rainy seasons of 2002 and 2003 in north Burkina Faso, West Africa. Wind speeds were measured using three sonic anemometers, at a sampling frequency of 16 Hz. Sediment transport was determined by calculating the mass fluxes from 17 MWAC catchers. In this study, a shrub was defined as a vegetation element with branches until ground and a tree as a vegetation element with a distinctive trunk below a canopy. Behind shrubs wind speed near the soil surface was reduced up to approximately seven times the height of the shrub. The observed reduction in wind speed in the area where wind speed was reduced was 15 per cent on average. At the sides of the shrub, wind speed was increased, by on average 6 per cent. As the area of increase in wind speed is one‐third of the area of decrease in wind speed, the net effect of a shrub is a reduction in wind speed. A similar pattern was visible for the pattern of sediment transport around a shrub. Downwind of a shrub, sediment transport was diminished up to seven times the height of the shrub. Probably most of this material was trapped by the shrub. Trees showed a local increase of wind around the trunk, which is expected to relate to an increase in sediment transport around the trunk. Mass flux measurements of sediment transport were not made, but visual observations in the field substantiate this. Behind the canopy of a tree, a tree acts similarly to a shrub regarding its effects on average wind speed, but as a tree is generally a larger obstacle than a shrub the extent of this effect is larger than for shrubs. Thus, whereas shrubs are more effective than trees regarding their direct effect on soil loss by trapping sand particles near the soil surface, trees are more effective in affecting soil loss indirectly by reducing the wind speed downwind more effectively than shrubs. Therefore, to reduce soil loss in an area, the presence of both trees and shrubs is crucial. Copyright © 2007 John Wiley & Sons, Ltd.     

Evaluation of the SEDD model for predicting sediment yield at the Sicilian experimental SPA2 basin

In this paper a spatially distributed model of the hillslope sediment delivery processes, named the sediment delivery distributed (SEDD) model, is initially reviewed; the model takes into account the sediment delivery processes due to both the hillslope sediment transport and the effects of slope curvature. Then the rainfall and sediment yield events measured at the experimental SPA2 basin, in Sicily, are used both to calibrate the SEDD model and to verify the predictive capability of the distributed sediment delivery approach at event scale. For the SPA2 basin discretized into morphological units and stream tubes, the SEDD model is calibrated at event scale using the measurements carried out at the outlet of the experimental basin in the period December 2000–January 2001. The model calibration is used to determine a relationship useful for estimating the unique coefficient β_e of the model by rainfall erosivity factor R_e at event scale. To test the predictive capability of the β_e = f(R_e) relationship, 20 events measured in the period September 2002–December 2005 are used; the comparison between measured sediment yield values and calculated ones for all monitored events shows that the sediment delivery distributed approach has a good predictive ability at event scale. The analysis also shows that estimating β_e by the relationship β_e = f(R_e) gives a better agreement between measured and calculated sediment yields than obtained with the median value β_e,m of all 27 calculated β_e values. Finally the analysis at annual scale, for the period 2000–2005, allows the estimation of the median value β_a,m representative of the annual behaviour. This analysis shows that the sediment delivery distributed approach also has a good predictive ability at annual scale. Copyright © 2006 John Wiley & Sons, Ltd.     

Impact of root architecture on the erosion‐reducing potential of roots during concentrated flow

Many studies focus on the effects of vegetation cover on water erosion rates, whereas little attention has been paid to the effects of the below ground biomass. Recent research indicates that roots can reduce concentrated flow erosion rates significantly. In order to predict this root effect more accurately, this experimental study aims at gaining more insight into the importance of root architecture, soil and flow characteristics to the erosion‐reducing potential of roots during concentrated flow. Treatments were (1) bare, (2) grass (representing a fine‐branched root system), (3) carrots (representing a tap root system) and (4) carrots and fine‐branched weeds (representing both tap and fine‐branched roots). The soil types tested were a sandy loam and a silt loam. For each treatment, root density, root length density and mean root diameter (D) were assessed. Relative soil detachment rates and mean bottom flow shear stress were calculated. The results indicate that tap roots reduce the erosion rates to a lesser extent compared with fine‐branched roots. Different relationships linking relative soil detachment rate with root density could be established for different root diameter classes. Carrots with very fine roots (D < 5 mm) show a similar negative exponential relationship between root density and relative soil detachment rate to grass roots. With increasing root diameter (5 < D < 15 mm) the erosion‐reducing effect of carrot type roots becomes less pronounced. Additionally, an equation estimating the erosion‐reducing potential of root systems containing both tap roots and fine‐branched roots could be established. Moreover, the erosion‐reducing potential of grass roots is less pronounced for a sandy loam soil compared with a silt loam soil and a larger erosion‐reducing potential for both grass and carrot roots was found for initially wet soils. For carrots grown on a sandy loam soil, the erosion‐reducing effect of roots decreases with increasing flow shear stress. For grasses, grown on both soil types, no significant differences could be found according to flow shear stress. The erosion‐reducing effect of roots during concentrated flow is much more pronounced than suggested in previous studies dealing with interrill and rill erosion. Root density and root diameter explain the observed erosion rates during concentrated flow well for the different soil types tested. Copyright © 2007 John Wiley & Sons, Ltd.     

Feedbacks between erosion and sediment transport in experimental bedrock channels

Natural bedrock rivers flow in self‐formed channels and form diverse erosional morphologies. The parameters that collectively define channel morphology (e.g. width, slope, bed roughness, bedrock exposure, sediment size distribution) all influence river incision rates and dynamically adjust in poorly understood ways to imposed fluid and sediment fluxes. To explore the mechanics of river incision, we conducted laboratory experiments in which the complexities of natural bedrock channels were reduced to a homogenous brittle substrate (sand and cement), a single sediment size primarily transported as bedload, a single erosion mechanism (abrasion) and sediment‐starved transport conditions. We find that patterns of erosion both create and are sensitive functions of the evolving bed topography because of feedbacks between the turbulent flow field, sediment transport and bottom roughness. Abrasion only occurs where sediment impacts the bed, and so positive feedback occurs between the sediment preferentially drawn to topographic lows by gravity and the further erosion of these lows. However, the spatial focusing of erosion results in tortuous flow paths and erosional forms (inner channels, scoops, potholes), which dissipate flow energy. This energy dissipation is a negative feedback that reduces sediment transport capacity, inhibiting further incision and ultimately leading to channel morphologies adjusted to just transport the imposed sediment load. Copyright © 2007 John Wiley & Sons, Ltd.     

A device for measuring downwearing rates on cohesive shore platforms

The device described in this paper, known as the traversing erosion beam, is believed to be the first to be designed specifically for measuring rates of downwearing of cohesive foreshores, such as clay shore platforms, under high‐energy wave conditions. It is primarily constructed of Flexlink Aluminium Structural System components and consists of a horizontal beam with a main leg and two further support legs. A sliding ‘dolly’ module is moved along the beam at precise intervals using a longitudinal scale as a reference. The topographic profile of the measurement surface is transferred to the dolly by a vertical sliding steel alloy rod, from which the relative height differences are measured by a separate engineer's digital height gauge placed on the dolly. The main leg of the device fits into a marine grade stainless steel box, which is deeply embedded into the foreshore or shore platform to act a permanent datum. The box is robust and can be expected to have a lifetime of at least a year, and possibly even five years or more. Sample data are provided from a clay shore platform at Warden Point in the Isle of Sheppey, Kent (UK), which demonstrate that the TEB can provide information on seasonal as well as annual rates of downwearing. The device has also been tested successfully on a peat and clay foreshore at Pett Level in Sussex and on a shore platform cut in glacial till at Easington, Yorkshire. Copyright © 2007 John Wiley & Sons, Ltd.