Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.     

Torsionally coupled dynamic performance analysis of asymmetric offshore platforms subjected to wave and earthquake loadings

The dynamic equations of motion of asymmetric offshore platforms under three different environmental conditions:seismic action,wave action and their combination are established in this paper. In establishing these motion equations,three typical eccentricity types including mass eccentricity,rigidity eccentricity and their combination were considered,as are eccentricities that occur un-idirectionally and bi-directionally. The effects of the eccentricity type,the dynamic characteristics and the environmental conditions on the torsional coupling response of platforms are investigated and compared. An effort has also been made to analyze the inffluence of accidental eccentricity on asymmetric platforms with different eccentricity in two horizontally orthogonal directions. The results are given in terms of non-dimensional parameters,accounting for the uncoupled torsional to lateral frequency ratio. Numerical results reveal that the eccentricity type has a great inffluence on the torsionally coupled response under different environmental conditions. Therefore,it is necessary to consider the combination of earthquake and wave action in the seismic response analysis of some offshore platforms.     

新疆西克尔地区下奥陶统鹰山组岩溶分带性研究

塔里木盆地岩溶缝洞型储层作为重要的油气储层备受关注,而目前预测此类型储层的方法较有限。在新疆伽什县西克尔野外露头区地表岩溶现象丰富,志留系地层以填平补齐的方式充填在一系列的溶沟和溶槽中,部分洼地中还有志留系地层残留,表明该区发育加里东中期岩溶。在本区岩溶古地貌的基础上,基于排泄基准面的分析,划分出3级岩溶台面并对应发育3期岩溶。据现代地貌学和岩溶学理论,按照水动力条件的不同并结合本区岩溶发育特征,运用岩溶旋回的观点将第二期岩溶剖面分为表层岩溶带、垂直渗滤带和水平潜流带,认识到西克尔地区古岩溶地下水发育规律及洞穴发育程度。构造运动是垂向岩溶分带性的主控因素;因此,在大的构造背景的前提下,可以有效地预测巴楚地区的缝洞型储层。     

挤密条件下U型地埋管换热器换热效率的理论分析及数值模拟

土层的导热系数是影响地源热泵地埋管换热器换热效率的重要因素之一,与土样的密度密切相关。为了提高地源热泵换热器换热效率,本文基于柱热源理论,建立了挤密钻进条件下换热器的传热理论模型,对换热器的换热效率进行了计算,并利用Ansys有限元软件对土层挤密条件下换热器的换热效果进行了数值分析。结果表明,与传统方法相比,土层挤密可有效降低钻孔周围的热阻,U型管换热器的换热效率可提高17%~20%。     

大庆朝阳沟油田浅层水平井钻井技术

介绍朝阳沟油田98区浅层水平井的井身结构特点、地层岩性特点以及该区水平井轨迹控制的难点。针对这些特点以及不同地层的造斜率,制定有效轨迹控制方案,选取合理的造斜工具及钻具组合,实施合理的钻井参数及技术措施,完成浅层水平井的施工。     

矿用高强度钻杆关键制造工艺技术分析

在瓦斯抽采钻孔施工过程中,钻杆承受复杂交变应力的作用,往往从焊缝区断裂,选用合理的摩擦焊接工艺和热处理工艺生产钻杆,增强钻杆焊缝区的机械性能,是延长钻杆服役时间的有效技术途径。     

梧桐庄矿大直径排水孔工程钻探施工技术

介绍了梧桐庄矿区孔深646m、终孔直径526mm两口排水孔的钻探施工技术。该2口排水孔深度大,孔径大,垂直度要求高,地层软硬互层变化较大,易缩径,穿层钻进时易形成孔斜,施工难度大,通过采用先用小径钻进、后扩孔的施工方法,并采取合理的钻具组合和泥浆,制定有效的防斜技术措施等,顺利完成排水孔施工,施工质量满足设计要求。     

非开挖导向钻机中几种主要结构的设计

近年来非开挖钻机飞速发展,水平定向钻进及导向钻进技术在管道建设中占主导地位。着重介绍了目前国内外水平定向钻机的动力头传动和驱动方式,给进机构的给进方式,夹持-拧卸装置、底盘、钻杆装卸装置的机构,并分析了它们的优缺点。     

500 kV输电线路黄河大跨越塔基工程施工实践

500 kV输电线路黄河大跨越塔基工程分地下和地上两大部分,集多种施工工艺方法于一体。重点阐述了钻孔桩施工,支撑系统的选择,高桩承台模板的支护,地脚螺栓的安放和大体积承台砼的浇注等施工关键工序、技术难点和重点的具体控制方法。     

水包油钻井液在梨深1井欠平衡段的应用

采用何种流体作为携岩介质,既能保护油气层又能保持井壁的稳定是欠平衡钻井的关键。梨深1井在四开欠平衡井段采用了水包油钻井液体系,这是该区域首次使用此体系。通过配方的优选,科学的维护处理,不但能够发现和保护了油气层,同时对较长泥岩段的井壁稳定起到了良好的防塌效果,为以后该区域的欠平衡钻井施工提供了一个较好的携岩体系。