南京市首级高程控制网的建立及跨江水准的研究

本文首先介绍了南京市首级高程控制网的概况,接着重点讨论了跨江水准测量方法的选择,并全面分析了测距三角高程法影响精度的三个因素,结合南京市首级高程控制网全面介绍了数据处理的有关问题。     

Hybrid seismic modeling based on discrete-wave number and finite-difference methods

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Blind prediction of the site effects at Ashigara Valley,Japan, and its comparison with reality

Weak and strong ground motions were numerically predicted for three stations of the Ashigara Valley test site. The prediction was based on the records from a rock-outcrop station, one weak-motion record from a surface-sediments station, and the standard geotechnical model. The data were provided by the Japanese Working Group on the Effects of Surface Geology as a part of an international experiment. The finite-difference method for SH waves in a 2-D linear viscoelastic medium (a causalQ model) was employed.Comparison with the real records shows that at two stations the predictions fit better than at the third one. Strangely, the two better predictions were for stations situated at larger distances from the reference rock station (one station was on the surface, the other in a borehole). The strong ground motion (the peak acceleration of about 200 cm s^–2) was not predicted qualitatively worse than the weak motion (8 cm s^–2). A less sophisticated second prediction (not submitted during the experiment), in which we did not attempt to fit the available weak-motion record at the sedimentary station, agrees with the reality significantly better.     

勘查油气田化探新方法——土壤相态烃测量法

烃气测量是油气化探最主要的方法。目前应用的烃气测量方法有两类:一类是测量土壤中游离烃气如K—V指纹法、吸附丝法、物上气法及直接取土壤气测量法等。此类方法由于需特殊设备及壤气测量方法本身固有的缺陷,目前还未得到普遍应用,另一类为土壤吸附烃气法即国内外目前普遍使用的酸解烃气法、此法在多数油气田上取得好效果,但也有相当多的地区如黄土、荒漠及水网发育等特殊景观区效果不好或不显著。本文介绍一种新的烃气测量法──土壤相态烃测量法。这是用一种特殊的技术,只选择性提取由油气藏渗漏过程中保存在运移通道围岩及近地表土壤各种次生矿物结构中以"穴居"态存在的轻烃组分。"穴居"态烃为累积性的指标,不受外界温度、修水等的影响,保存较牢固,测定结果稳定。相态烃法避免了酸解烃法存在的生物成因烃、矿物同生烃及碳酸盐的干扰影响,提高了测量指标的信噪比,突出了应有的异常。本方法已在黄土厚覆盖区两个已知油气田和一个风成沙覆盖的断裂发育油田上试验获得成功,结果表明相态烃法优于酸解烃法。     

重要找矿指示元素的野外快速分析法——金的野外快速分析

近年来,作者发展了七种以上重要找矿指示元素的野外快速分析法,此乃其一。文中提出一种新的金样冷浸技术,引进了新的光导光度检测方法,样品经溴化钠—硫酸—过氧化氢冷浸,用经丙酮—MIBK处理的泡沫塑料富集金,经混合解脱剂解脱并直接取解脱液用改进的微珠析出法或用光导光度法测定。取10g样品,可测定0.0005-50g/t范围内的金。方法简便、快速,可在普查分队驻地进行,每一工作日可测定80多个样品,由于废弃了王水分解样品和泡沫塑料的灰化,具有广阔的应用前景。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

Infinitesimal orbits around lagrange points in the elliptic,restricted three-body problem

This study presents a method of obtaining asymptotic approximations for motions near a Lagrange point in the planar, elliptic, restricted three-body problem by using a von Zeipel-type method. The calculations are carried out for a second-order escape solution in the proximity of the equilateral Lagrange point, L ₄, where the primaries' orbital eccentricity is taken as the small parameter .     

FS方法及其在综合多项震兆中的应用

本文提出了一种模式识别方法--FS方法.该方法的特征取为某些论域上的模糊子集.先以每三个原始特征组成子分类器的特征集,“训练”这些分类器,然后对子分类器进行筛选,最后用筛选出的子分类器的“软”分类结果的加权平均作为判别函数,形成总的分类决策.将FS方法应用于综合多项震兆,并进行了一系列控制试验,还与地震学中几种常用的方法进行了对比试验.结果表明,FS方法是稳定和有效的.     

20世纪末广东省三大城市大气环境质量综合评价——改进密切值法的扩展应用

大气环境质量综合评价是一个城市环境质量考核的重要指标，改进的密切值法是其中一种切实可行的评价方法。通过对1991-2000年10年间广东省三大城市——广州、深圳和珠海的大气环境质量进行综合评价，发现20世纪末，大气环境质量最好的是珠海市，最差的是广州市。与广东省平均水平相比、三大城市中。广州市污染程度高于全省平均水平。从空气环境质量的变化趋势来看，自1997年开始，三大城市大气环境质量趋于好转，为新世纪城市空气环境质量改善提供了良好的基础。