Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

华北克拉通北缘隆化地区S型花岗岩的独居石年龄图谱

位于华北克拉通北缘中段的隆化S型花岗岩由石榴石黑云母花岗岩、石榴石花岗岩以及片麻理化的黑云母花岗岩组成。其主体岩性石榴石黑云母花岗岩SiO_2和Al_2O_3含量分别为64.09%～69.6%以及14.6%～16.13%,K_2O/Na_2O>1.0,A/CNK>1,0,Mg~#在20.76～34.89之间变化,具有明显的Nb、Ta、P、Ti和Sr亏损以及Rb、K和Th富集。石榴石黑云母花岗岩(样品JB6031-1)采用独居石电子探针U-Th-Pb化学法进行测年,获得了2553±120Ma、2180±42Ma和1854±24Ma三个年龄峰值。一颗独居石内部成分分带上6个分析点定年结果构成2553±120Ma的峰值年龄,这一年龄与我们最新获得的2506±7Ma和2541±8Ma(继承锆石年龄)LA-ICP-MS锆石U-Pb同位素年龄相似,我们将这一独居石年龄解释为继承独居石的年龄,表明在赤城-隆化断裂以北存在太古宙陆块,并且在后期构造-热事件中发生部分熔融形成S型花岗岩。该独居石颗粒幔部成分分带上10个分析点的测年结果揭示的峰值年龄为2181±42Ma,该年龄也是出现频率最高的年龄值,我们建议2181±42Ma为S型花岗岩的结晶年龄,反映了S型花岗岩的侵位时代。独居石颗粒外部成分分带上8个分析点的测年结果构成1854±24Ma的峰值年龄,该年龄与华北克拉通中部带的变质年龄接近,我们将其解释为S型花岗岩的变质年龄,表明华北克拉通北缘的构造演化与中部带的构造演化密切相关。     

柴达木盆地北缘侏罗系两类不同有机质丰度泥岩的 生物标志物特征对比研究

在柴达木盆地北缘地区,分别选取有机碳含量很低和较高的侏罗系泥岩样品,对比分析了它们在生物标志物组成上的差异。结果发现,高有机质丰度泥岩的生标组成与我国西北地区侏罗纪煤系有机质的特征差异不大,相比而言,低有机质丰度泥岩的正烷烃以前主峰为特征,Pr/Ph比值在1.0左右,三环萜烷和伽马蜡烷丰度较高,并在部分样品中检出了25 降藿烷系列。结合泥岩的有机岩石学特征,认为这些差异可能反映了泥岩沉积环境和生烃母质的不同:高有机质丰度泥岩的有机显微组分以相对弱还原条件下的形态有机质为主,包括藻类体、孢子体和角质体等,而低有机质丰度泥岩的有机显微组分以相对强还原条件下的矿物沥青基质为主,其母质可能来源于低等显微菌藻类。进一步通过对比不同有机质丰度泥岩,以及区内原油生标组成之间的相互关系,讨论了研究区的油源问题。     

三峡库区生基包滑坡监测及成果分析

生基包滑坡监测属于三峡库区奉节县三期地质灾害监测预警项目之一,该滑坡位于长江左岸,临近人口稠密的安坪乡集镇,地理位置重要。三峡水库175 m蓄水后,其变形破坏特征有何表现？对航道安全运营有无潜在威胁？是否会对滑坡体上的重要建筑及村民生产生活构成危害？针对这些问题,首先分析了滑坡的工程地质特征及主要的影响因素;其次,确立以4种监测手段为主、人工巡查为辅的监测方案;通过对大地变形GPS、深部位移、滑坡推力等几种监测方法的运用及对其成果进行分析研究,以实例说明其在滑坡监测中的应用;再次,结合宏观人工巡查进行对照分析,以充分说明大地变形、深部位移和滑坡推力监测在实际运用中的可行性;最后,根据监测结论提出对生基包滑坡防治的建议。     

手掘式顶管在市政排水工程中的应用

从混凝土管材的选定、工作坑的设计及施工、顶管顶进中若干关键问题入手,介绍了手掘式顶管施工技术在成都市中心城水环境综合整治工程G标段管道排水工程中的应用。     

饱和软黏土动力学特性循环扭剪试验研究

以饱和软黏土的循环扭剪试验研究为基础,阐明不固结不排水条件下饱和软黏土的动力学特性。在循环扭剪和循环三轴两种不同试验应力状态下,通过研究不同围压和不同静、动应力组合下饱和软黏土的应力等效破坏关系和应变等效破坏关系,提出在循环荷载作用下饱和软黏土的循环破坏同样遵循Mises屈服准则,且在Mises屈服准则下,饱和软黏土的循环强度趋于不变量。循环破坏的过程可以等效为一种拟静力弹塑性循环蠕变,建立了饱和软黏土循环累积变形随静荷载、循环荷载以及循环破坏振次之间的关系式。上述结论分别从应力和变形两个方面阐述饱和软黏土的动力学特性,与试验应力状态和围压无关,可以推广到一般应力状态下。     

长江三角洲北翼J9孔揭示地层和古地磁特征

长江三角洲北翼地区缺少较长尺度的第四纪海陆变迁及环境演变的深入探讨,深达423m的海安县基岩标J9孔为此提供了较好的研究对象。通过观察该孔松散层岩心,总结其沉积特征,认为岩心可明显地划分为6个特征岩性段。同时,地层古地磁测试结果显示:0～200m为布容正极性世,200～334m为松山负极性世,334m以下为高斯正极性世。综合分析岩心沉积特征并参考古地磁测试结果对地层进行了初步划分,认为:0～39m为全新世地层,39～153m为晚更新世地层,153～200m为中更新世地层,200-334m为早更新世地层,之下为新近纪地层。地层中存在晚更新世晚期特征的硬粘土标志层,指示本地不是冰后期古河谷的发育地。     

阿尔金南缘构造带西段辉绿岩墙群的地球化学特征及构造环境

对阿尔金南缘构造带西段辉绿岩墙群的岩石学和地球化学的详细研究表明,该区辉绿岩墙群为拉斑系列岩石,其主量元素以中等TiO2(1.19%～1.59%)、高MgO(5.51%～7.88%)、贫K2O(0.04%～0.84%)和P2O5(0.10%～0.20%)、Na2OK2O为特征;高场强元素(HFSE)丰度特征显示其为E-MORB型或过渡型玄武岩质岩石;稀土元素总量相对较高,轻重稀土元素分馏不显著[(La/Yb)N=1.93～3.61,LREE/HREE=3.01～4.10],在球粒陨石标准化配分模式图上呈略富集型.结合玄武岩构造环境判别图解综合分析推测,它们可能形成于一种裂谷向MORB环境过渡的构造环境,即初始小洋盆构造环境.     

采用碳氮稳定同位素技术对黄海中南部鳗鱼食性的研究

根据2005年4～5月在黄海和长江口海域进行的春季底拖网调查，应用稳定同位素方法研究了黄海中南部鯷鱼（Engraulis　japonicus）及其可能摄食饵料的碳氮稳定同位素比值，结果表明：（1）黄海中南部鯷鱼的食物组成为不同粒径的浮游动物、太平洋磷虾（Euphausia pacifuca）和仔稚鱼，其中以粒径为500-900μm的浮游动物为主，贡献比例占61％～84％；仔稚鱼贡献比例占16％～21％，较传统胃含物方法分析的结果小；（2）黄海中部海域鯷鱼的碳氮稳定同位素比值平均值较南部海域高，原因可能与各海域的能量来源不同或存在微食物环有关，也可能与不同海域鯷鱼的能量转换途径不一样，即与食物链长短不一有关．