Structurally controlled fluid flow associated with breccia vein formation

A breccia vein sampled from a shear zone in greenschist facies metapelites at Mount Isa, Queensland, Australia, shows a systematic variation in vein geometry that is related to the geometry of folding and faulting within the sample. Calcite vein-fill is coarse grained and equigranular, suggesting precipitation in a fluid-filled space. Partially folded veins suggest that veining occurred during folding and faulting. The breccia vein contains a central zone in which dilation has occurred simultaneously in all directions in the plane of section, implying that this was a zone of high fluid pressure and nearly isostatic differential stress during folding and faulting. From these observations, it can be inferred that the breccia vein was a zone of high permeability and a likely fluid channel during deformation. This hypothesis was tested by stable isotope analysis of veins and host rocks. The calcite veins have δ¹³C values of -11.1 ± 0.1% and δ¹⁸O values of 6-10%_o, whereas the host metapelite has δ¹³C values of -10.62 and -10.11% and δ¹⁸O values of 14-15%_o. These values are consistent with an igneous-derived, H₂O-dominated fluid that exchanged little oxygen with the host rocks, but derived much of its carbon from the wall rock. The isotopic disequilibrium between the veins and the wall rock confirms that the fluid was externally derived, and that the breccia vein acted as a channel for large-volume fluid flow within the shear zone.     

Crustal growth in south-eastern Australia—evidence from lower crustal eclogitic and granulitic xenoliths

Mafic and ultramafic xenoliths in a basaltic cone at The Anakies in south-eastern Australia are geochemically equivalent to continental basaltic magmas and cumulates. The xenolith microstructures range from recognizably meta-igneous for intrusive rocks to granoblastic for garnet pyroxenites. Contact relationships between different rock types within some xenoliths suggest a complex petrogenesis of multiple intrusive, metamorphic and metasomatic events at the crust/mantle boundary during the evolution of south-eastern Australia. Unaltered spinel lher-zolite, typical of the uppermost eastern Australian mantle, is interleaved with or veined by the metamorphosed intrusive rocks of basaltic composition. Geothermobarometry calculations by a variety of methods show a concordance of equilibration temperatures ranging from 880°C to 980°C and pressures of 12 to 18 kbar (1200-1800 mPa). These physical conditions span the gabbro to granulite to eclogite transition boundaries. The water-vapour pressure during equilibration is estimated to be about 0.5% of the load pressure, using amphibole breakdown data. Large fluid inclusions of pure CO₂ are abundant in the mineral phases in the xenoliths, and it is suggested that flux of CO₂ from the mantle has been an important heat source and fluid medium during metamorphism of the mafic and ultramafic protoliths at the lower crust/upper mantle boundary. The calculated pressures and temperatures suggest that the south-eastern Australian crust has sustained a high geothermal gradient. In addition, the nature of the mineral assemblages and the contact relationships of granulitic rock with spinel lherzolite, characteristic of mantle material, suggest that the Moho is not a discrete feature in this region, but is represented by a transition zone approximately 20 km thick. These inferences are in agreement with geophysical data (including seismic, heat-flow and electrical resistivity data) determined for south-eastern Australia. Underplating at the crust/mantle boundary by continental basaltic magmas may be an important alternative or additional mechanism to the conventional andesite model for crustal accretion.     

Model for large strain consolidation with compressible pore fluid

A numerical model, called CCPF1 (C onsolidation with C ompressible P ore F luid 1 ), is presented for one‐dimensional large strain consolidation of a saturated porous medium with compressible pore fluid. The algorithm includes all the capabilities of a previous large strain consolidation code, CS2, written for incompressible pore fluid. In addition, fluid density and fluid viscosity are functions of fluid pressure in CCPF1. Generalization of the numerical approach to accommodate these functions requires several modifications to the CS2 method, including phase relationships, intrinsic permeability, pore pressure, fluid potential, and mass flux. Inertial forces are neglected and isothermal conditions are assumed. The development of CCPF1 is first presented, followed by an example that illustrates the effects of pore fluid compressibility on the mechanics of consolidation of saturated porous media. Copyright © 2004 John Wiley & Sons, Ltd.     

Fluid inclusion evidence for basement decompression during Permo-Triassic extension, SE New England, USA

Abstract CO₂-bearing fluid inclusions in strongly lineated but weakly foliated late Precambrian gneisses within the Hope Valley Shear zone of Connecticut and Rhode Island are of mixed composition ( X _co2± 0.1; 7 wt% NaCl equivalent) and variable density (0.59–0.86 g/ml) and occur mainly as isolated inclusions. Also present are dilute (3 wt% NaCl equivalent) aqueous inclusions which occur on healed fractures related to greenschist facies retrograde metamorphism. Isochores for dense isolated CO₂-bearing inclusions indicate pressures of 7.5–9 kbar at 500–600° C, the estimated temperature conditions of peak metamorphism. Published ⁴⁰Ar/³⁹Ar hornblende plateau age spectra indicate cooling through about 500° C at 265 ± 5 Ma. Isochores for low-density CO₂-bearing inclusions and aqueous inclusions intersect at the conditions of retrograde metamorphism (325–400° C) and indicate pressures of 3–4 kbar. Published ⁴⁰Ar/³⁹Ar biotite plateau ages indicate cooling through about 300° C at 250 ± 5 Ma. These data define a P–T uplift curve for the region which is convex towards the temperature axis and indicate uplift rates between 0.4 and 3.3 mm/year in Permian time. Exhumation of basement gneisses was coeval with normal (west-down) motion along the regional basement–cover contact (Honey Hill–Lake Char–Willimantic fault system), and is interpreted as due to post-orogenic extensional collapse of the Alleghanian orogeny.     

Endogreisen, brecciation and fluid activity at the Mount Bischoff Sn-deposit, north-west Tasmania, Australia

Abstract Endogreisens which replace K-feld-spar-quartz dykes in a Devonian (360 Ma) tin deposit at Mt Bischoff, north-west Tasmania, formed from the interaction of unusual solutions, probably derived from an underlying leucogranite pluton, porphyry dykes and limited quantities of local dolomitic country rock components. The intensity of greisenization and pH of the solutions increase inward to the greisenized dykes'cores and downward. The following types of greisen assemblages indicate increasing degrees of greisenization: 'sericite'muscovite + quartz ± tourmaline ± fluorite, topaz + quartz ± tourmaline ± fluorite, weberite, prosopite, ralstonite, Ca-ralstonite; and quartz ± topaz ± fluorite. Where the solutions interacted with dolomite, exogreisens consisting of topaz- or tourmaline-bearing assemblages were formed. The greisens were subsequently overprinted to varying degrees by siderite, sulphides and hydrous silicates (talc, serpentine, chlorite, micas).
The temperature during greisenization ranged from 180 to 414°C, based on fluid inclusions in topaz, quartz, fluorite, sellaite and cassiterite. The main greisen-forming event occurred at temperatures of 360±20°C. The fluids boiled intermittently. Their salinities ranged from 31.5 to 38.9 wt% total dissolved salts, consisting of Ca–K–Na–Fe–Cl±hydrocarbon species. Fluid inclusion data indicate that only 0.5–1.5 km of cover were present above this deposit at the time of formation.
The greisenized dykes were intruded by and intrude different stages of breccias. The breccias consist mainly of country rock and greisenized dyke fragments, with rock-flour and later tourmaline alteration. The Mt Bischoff greisen system is possibly part of a 'porphyry tin'style deposit formed at near-surface conditions (0.5–1.0 km).     

Metagabbro and associated eclogites in the Lubrin area, Nevado-Filabride Complex, Spain

Abstract Several small bodies of metabasite (maximum dimensions of 1000 m x 500 m) are included in the metamorphic rocks of the Nevado-Filabride Complex in the Betic Cordilleras (Almeria Region). The body of 400 m x 100 m, located 200 m due west of the Lubrin village, contains troctolitic gabbro with well-preserved igneous textures and mineral compositions, wholly amphibolitized gabbro, garnet-bearing metagabbro eclogite. Along with the textural and mineral changes, sensible and regular geochemical variations can be observed, where the content of MgO decreases from 24% to 11%, while that of CaO and Na₂O increases from 7% to 11% and from 2% to 3%, respectively. In addition, the content of some minor elements such as Sr, Y, Nb, Zr and Sc increases while that of Ni and Cr decreases from troctolitic gabbro to the eclogite. The amphibolitized gabbro shows values scattered around those of the troctolitic gabbro. These geochemical variations are ascribed to inherited differences in the pre-metamorphic protolith, i.e. a fractionated gabbro which varies from olivine-rich to clinopyroxene-rich gabbro. Nevertheless, some metasomatism affected the Lubrin body without changing the main chemical trends, as documented by the significantly different ⁸⁷Sr/⁸⁶Sr ratios of each rock-type. This points to a metasomatism which involved the introduction of crustal radiogenic strontium. The petrographical and mineral chemical features are interpreted to be the result of syn-metamorphic fluid circulation possibly combined with deformation by shearing. The igneous texture and mineral chemistry have been retained wherever both fluid circulation and shearing were ineffective. On the contrary, where both events were effective, the formation of eclogite occurred. Later, the entire body underwent a retrogressive amphi-bolitic stage under greenschist facies conditions, which was probably responsible for the formation of the amphibolitized gabbro portion and for the retrogression of the eclogite.     

Mixing caused by lateral internal seiching within a partially mixed estuary

The salinity fluctuations at an STD near the halocline in Southampton Water have been spectrally analysed. Mixing is shown to commence at a layer Richardson number of about 20. The predominant energy inputs have periods of 7–9 and 3·5–4·5 min. These motions arise from lateral internal seiching and it is considered that they are produced by interaction of the surface seiche with the shallow side of the estuary. The wavelengths of the standing wave are calculated to be about 120 and 60 m respectively, and these compare well with echo-sounding surveys of the elevation of the halocline.     

On the origin of CO2-rich fluid inclusions in migmatites

Abstract Nearly pure CO₂ fluid inclusions are abundant in migmatites although H₂O-rich fluids are predicted from the phase equilibria. Processes which may play a role in this observation include (1) the effects of decompression on melt, (2) generation of a CO₂-bearing volatile phase by the reaction graphite + quartz + biotite + plagioclase = melt + orthopyroxene + CO₂-rich vapour, (3) selective leakage of H₂O from CO₂+ H₂O inclusions when the pressure in the inclusion exceeds the confining pressure during decompression, and (4) enrichment of grain-boundary vapour in CO₂ by subsolidus retrograde hydration reactions.     

Dehydration melting, fluid buffering and decompressional P–T path in a granulite complex from the Eastern Ghats, India

A suite of metapelites, charnockites, calc-silicate rocks, quartzo-feldspathic gneisses and mafic granulites is exposed at Garbham, a part of the Eastern Ghats granulite belt of India. Reaction textures and mineral compositional data have been used to determine the P–T–X evolutionary history of the granulites. In metapelites and charnockites, dehydration melting reactions involving biotite produced quartzofeldspathic segregations during peak metamorphism. However, migration of melt from the site of generation was limited. Subsequent to peak metamorphism at c . 860° C and 8 kbar, the complex evolved through nearly isothermal decompression to 530–650° C and 4–5 kbar. During this phase, coronal garnet grew in the calc-silicates, while garnet in the presence of quartz broke down in charnockite and mafic granulite. Fluid activities during metamorphism were internally buffered in different lithologies in the presence of a melt phase. The P–T path of the granulites at Garbham contrasts sharply with the other parts of the Eastern Ghats granulite belt where the rocks show dominantly near-isobaric cooling subsequent to peak metamorphism.     

南海北部不同涡旋对内潮的影响

南海北部吕宋海峡是内潮最为活跃的区域之一,且涡旋种类繁多,不同特性的涡旋对内潮的影响不同。基于近岸与区域海洋共同模式(coastal and regional ocean community model,CROCO),模拟探究理想涡旋存在时,涡旋位置、极性、峰值流速和半径对内潮的影响。结果表明:涡旋位置是影响内潮的直接因素,位于涡旋区域内的内潮是主要影响对象,涡旋中心以西内潮方向变化的角度是以东的3倍。气旋涡和反气旋涡分别使潮能通量的方向向南和向北偏转,最大偏转角度超过12°,当涡旋所致背景流与内潮传播方向一致时,内潮群速度增强,反之减弱。涡旋对内潮的影响范围和幅度随着涡旋的半径和峰值流速的增大而变大。当涡旋峰值速度变大时,反气旋涡心以北的潮能通量增长量超过15 kW/m。当涡旋半径增大时,涡旋峰值速度的位置发生变化,涡旋的峰值流速和半径共同影响潮能通量水平分布结构,使其呈现纬向单峰或多峰结构。