Optimisation de la quantification des flux de matière en suspension d'un cours d'eau alpin : l'Isère à Grenoble (France)

This study seeks to determine suspended-matter flux of the Isère at Grenoble, one of the most important rivers of the northern French Alps. Since 1994, and especially 1996, systematic samplings of the left bank make it possible to follow in one point the variations of suspended particles and matter (SPM) of this river. But from a single measurement, sometimes not very representative of the whole observable concentrations within the section, it remains still difficult to estimate precisely the SPM flux. The results of this study show in particular the successive appearance of several turbidity gradients, whose occurrence is explained mainly by the hydrological and hydro-sedimentary dynamics of this river. The estimate of these gradients thus makes it possible to extrapolate specific measurements more easily and consequently to daily define the quantities of suspended matter exported by the Isère. Since 1996, the results show a very high flow, specific of the Isère at Grenoble, variable between 124 and more than 460 t km^?2 yr^?1. To cite this article: D. Dumas, C. R. Geoscience 336 (2004).     

内蒙古温带半干旱羊草草原N2O通量及其影响因素

利用静态箱 -气相色谱法于 2 0 0 1～ 2 0 0 3年对内蒙古锡林河流域羊草草原进行了连续 2年的野外定位试验 ,获得羊草草原原状群落与土壤N2 O年排放通量分别在 3 91～ 4 71μgm- 2h- 1以及 5 5 0～ 10 0 3μgm- 2 h- 1范围内变动 ,证明内蒙古温带半干旱羊草草原生态系统是大气中N2 O的源 ;系统分析了羊草草原N2 O通量的季节变化、源汇特征以及关键的环境因子对草地N2 O通量的影响等 ,建立了N2 O通量与环境因子间的回归方程 ;并利用两年连续完整的观测数据对羊草草原N2 O年排放量进行了估算     

基于通量均衡基准的地壳垂直形变场分析模型

根据全球通量均衡假说建立了地壳垂直形变场的分析模型，在球面近似下求得了该模型的球谐函数级数解并拟合了两个不同区域的地壳垂直形变场，编绘了等值线图，继而在密切平面坐标系下导出了该模型的Fourier级数解。结果表明，该方法不仅具有几何意义，而且具有一定的地球动力学意义。     

In the Critical Zone: Geography at the U.S. Geological Survey

Geography is again becoming an integral part of the premier natural‐science agency of the federal government. Geographic research emphasizes the surface of the earth, a portion of the earth system that the U.S. Geological Survey (USGS) defines as the “critical zone.” Although geography was part of the USGS from the creation of the agency, in recent years geography in the agency has largely been limited to topographic mapping. Recently, the USGS and an advisory committee of the National Research Council (NRC) reviewed the role of geography at the Survey. The committee's report, along with ongoing decision‐making in the federal government, is likely to reshape geography in the USGS. The newly defined USGS has a regional structure and four disciplines: geology, hydrology, biology, and geography. The NRC report emphasizes the need for the creation of a spatial database called the National Map to replace the existing series of paper topographic maps. The report also outlines the need for geographic research in geographic information science (GIScience), nature‐society connections, and bridging of science to decision‐making. The NRC report has been briefed throughout the USGS, in the federal executive branch, and in Congress. The changing role for geography in the USGS requires change in the agency culture, revised budgetary decisions, and the establishment of a long‐term core agenda for research. Academic geographers will need to prepare a new generation of geographers for participation in the USGS and similar agencies.     

Numerical Modeling of Basin-Range Tectonics Related to Continent-Continent Collision

Continent-continent collision is the most important driving mechanism for the occurrence of various geological processes in the continental lithosphere. How to recognize and determine continent-continent collision,especially its four-dimensional temporal-spatial evolution, is a subject that geological communities have long been concerned about and studied. Continent-continent collision is mainly manifested by strong underthrnsting (subduction) of the underlying block along an intracontinental subduction zone and continuous obduction (thrusting propagation) of the overlying block along the intracontinental subduction zone, the occurrence of a basin-range tectonic framework in a direction perpendicular to the subduction zone and the flexure and disruption of the Moho. On the basis of numerical modeling, the authors discuss in detail the couplings between various amounts and rates of displacement caused by basin subsidence, mountain uplift and Moho updoming and downflexure during obduction (thrusting propagation) and subduction and the migration pattern of basin centers. They are probably indications or criteria for judgment or determination of continent-continent collision.     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

Rainfall partitioning through a mixed cedar swamp and associated C and N fluxes in Southern Ontario,Canada

Partitioning of rainfall through a forest canopy into throughfall, stemflow, and canopy interception is a critical process in the water cycle, and the contact of precipitation with vegetated surfaces leads to increased delivery of solutes to the forest floor. This study investigates the rainfall partitioning over a growing season through a temperate, riparian, mixed coniferous‐deciduous cedar swamp, an ecosystem not well studied with respect to this process. Seasonal throughfall, stemflow, and interception were 69.2%, 1.5%, and 29.3% of recorded above‐canopy precipitation, respectively. Event throughfall ranged from a low of 31.5 ± 6.8% for a small 0.8‐mm event to a high of 82.9 ± 2.4% for a large 42.7‐mm event. Rain fluxes of at least 8 mm were needed to generate stemflow from all instrumented trees. Most trees had funnelling ratios <1.0, with an exponential decrease in funnelling ratio with increasing tree size. Despite this, stand‐scale funnelling ratios averaged 2.81 ± 1.73, indicating equivalent depth of water delivered across the swamp floor by stemflow was greater than incident precipitation. Throughfall dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) averaged 26.60 ± 2.96 and 2.02 ± 0.16 mg L^?1, respectively, which were ~11 and three times above‐canopy rain levels. Stemflow DOC averaged 73.33 ± 7.43 mg L^?1, 35 times higher than precipitation, and TDN was 4.45 ± 0.56 mg L^?1, 7.5 times higher than rain. Stemflow DOC concentration was highest from Populus balsamifera and TDN greatest from Thuja occidentalis trees. Although total below‐canopy flux of TDN increased with increasing event size, DOC flux was greatest for events 20–30 mm, suggesting a canopy storage threshold of DOC was readily diluted. In addition to documenting rainfall partitioning in a novel ecosystem, this study demonstrates the excess carbon and nitrogen delivered to riparian swamps, suggesting the assimilative capacity of these zones may be underestimated.     

Dynamic river–groundwater exchange in the presence of a saline,semi‐confined aquifer

Understanding groundwater–surface water exchange in river banks is crucial for effective water management and a range of scientific disciplines. While there has been much research on bank storage, many studies assume idealized aquifer systems. This paper presents a field‐based study of the Tambo Catchment (southeast Australia) where the Tambo River interacts with both an unconfined aquifer containing relatively young and fresh groundwater (<500 μS/cm and <100 years old) and a semi‐confined artesian aquifer containing old and saline groundwater (electrical conductivity > 2500 μS/cm and >10 000 years old). Continuous groundwater elevation and electrical conductivity monitoring within the different aquifers and the river suggest that the degree of mixing between the two aquifers and the river varies significantly in response to changing hydrological conditions. Numerical modelling using MODFLOW and the solute transport package MT3DMS indicates that saline water in the river bank moves away from the river during flooding as hydraulic gradients reverse. This water then returns during flood recession as baseflow hydraulic gradients are re‐established. Modelling also indicates that the concentration of a simulated conservative groundwater solute can increase for up to ~34 days at distances of 20 and 40 m from the river in response to flood events approximately 10 m in height. For the same flood event, simulated solute concentrations within 10 m of the river increase for only ~15 days as the infiltrating low‐salinity river water drives groundwater dilution. Average groundwater fluxes to the river stretch estimated using Darcy's law were 7 m³/m/day compared with 26 and 3 m³/m/day for the same periods via mass balance using Radon (²²²Rn) and chloride (Cl), respectively. The study shows that by coupling numerical modelling with continuous groundwater–surface water monitoring, the transient nature of bank storage can be evaluated, leading to a better understanding of the hydrological system and better interpretation of hydrochemical data. Copyright © 2015 John Wiley & Sons, Ltd.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.     

Enhancement of backtracking search algorithm for identifying soil parameters

In this paper, an enhanced backtracking search algorithm (so-called MBSA-LS) for parameter identification is proposed with two modifications: (a) modifying the mutation of original backtracking search algorithm (BSA) considering the contribution of current best individual for accelerating convergence speed and (b) novelly incorporating an efficient differential evolution (DE) as local search for improving the quality of population. The proposed MBSA-LS is first validated with better performance than the original BSA and some other typical state-of-the-art optimization algorithms on a benchmark of soil parameter identification in terms of effectiveness, efficiency, and robustness. Then, the efficiency of the MBSA-LS is further illustrated by two representative cases: identifying soil parameters from both laboratory tests and field measurements. All comparisons demonstrate that the proposed MBSA-LS algorithm can give accurate results in a short time. Finally, to conveniently solve the problems of parameter identification, a practical tool ErosOpt for parameter identification is developed by integrating the proposed MBSA-LS and some other efficient algorithms for readers to conduct the parameter identification using optimisation algorithms.