三维空间实体间拓扑关系的矩阵描述

三维空间实体及其间拓扑关系的语义描述和形式化表达是三维ＧＩＳ空间数据建模的重要理论基础。在ｋ－维流形的三维空间实体形式化描述方法的基础上,根据三维空间实体的可剖分性,采用顾及维数的九元组描述框架,研究用于构成三维实体的ｋ－单纯形（０≤ｋ≤３）之间的拓扑空间关系,继而研究三维实体间的拓扑空间关系。     

一个韧性转换挤压带的变形分解作用：以阿尔金断裂带东段为例

变形构造研究显示阿尔金划分成具有近水平拉伸线理的韧性左行走滑变形域和具有陡角度倾伏拉伸线理的收缩变形域。在ＳＳ与ＰＳ之间的过渡区域还发现中等角度倾伏的拉伸线理。     

基于CEI的飞船交会对接远程导引段的轨道确定方案

探讨了CEI技术在飞船交会对接远程导引段的高精度定轨与实时监控的能力。仿真结果表明:精密定轨中采用可视弧段较长的单站可使相对位置精度达百米以内,速度达厘米/秒级。采用单一绝对扩展卡尔曼滤波器的方案进行实时轨道计算,采用滤波稳定后固定模糊度的方法可以使相对轨道位置精度达十米级,速度精度达厘米/秒级,事后及实时的轨道精度均满足远程导引段的精度指标。     

Shear stress partitioning in large patches of roughness in the atmospheric inertial sublayer

Drag partition measurements were made in the atmospheric inertial sublayer for six roughness configurations made up of solid elements in staggered arrays of different roughness densities. The roughness was in the form of a patch within a large open area and in the shape of an equilateral triangle with 60 m long sides. Measurements were obtained of the total shear stress (τ) acting on the surfaces, the surface shear stress on the ground between the elements (τ_S) and the drag force on the elements for each roughness array. The measurements indicated that τ_S quickly reduced near the leading edge of the roughness compared with τ, and a τ_S minimum occurs at a normalized distance (x/h, where h is element height) of (downwind of the roughness leading edge is negative), then recovers to a relatively stable value. The location of the minimum appears to scale with element height and not roughness density. The force on the elements decreases exponentially with normalized downwind distance and this rate of change scales with the roughness density, with the rate of change increasing as roughness density increases. Average τ_S : τ values for the six roughness surfaces scale predictably as a function of roughness density and in accordance with a shear stress partitioning model. The shear stress partitioning model performed very well in predicting the amount of surface shear stress, given knowledge of the stated input parameters for these patches of roughness. As the shear stress partitioning relationship within the roughness appears to come into equilibrium faster for smaller roughness element sizes it would also appear the shear stress partitioning model can be applied with confidence for smaller patches of smaller roughness elements than those used in this experiment.     

长距离网络RTK基准站间整周模糊度的快速解算

由于电离层延迟、对流层延迟等系统误差具有随测站间距离增加而相关性降低的特性,长距离情况下准确快速得到载波相位整周模糊度十分困难.因此文章提出了一种长距离网络RTK基准站间双差整周模糊度的快速解算方法,该方法利用M-W组合观测值进行双差宽巷整周模糊度的计算,结合无电离层组合观测值进行基准站间双差载波相位整周模糊度的确定,且不需线性化、不需解求方程组,各双差整周模糊度之间相互独立.最后通过实测数据进行算法验证,证明了该方法能够快速、可靠地解算长距离基准站间的双差整周模糊度.     

�����뵥��Ԫ�Dz�����RTK����

?о???????????RTK?ο???????????????????????????????????????????????????????????????????????????????????????????????????顣?????????÷??????????÷??????????????????????RTK???????????cm????λ??     

回转椭球电场问题一种新解法

讨论关于回转椭球静态场求解的一般方法，借助回转椭圆坐标系，静态场问题的一般解可以用实宗量和虚宗量勒让德函数以及余弦函数形式表出，使得结果更为简明和系统化。所得结果可以直接应用到椭球导体电场、尖端效应、介质椭球极化以至双极化雷达测量降水问题等，具有相当具体的实用价值。     

Neotectonic transpressional intraplate deformation in eastern Eurasia: Insights from active fault systems in the southeastern Korean Peninsula

Transpression occurs in response to oblique convergence across a deformation zone in intraplate regions and plate boundaries. The Korean Peninsula is located at an intraplate region of the eastern Eurasian Plate and has been deformed under the ENE–WSW maximum horizontal compression since the late Pliocene. In this study, we analyzed short-term instrumental seismic (focal mechanism) and long-term paleoseismic (Quaternary fault outcrop) data to decipher the neotectonic crustal deformation pattern in the southeastern Korean Peninsula. Available (paleo-)seismic data acquired from an NNE–SSW trending deformation zone between the Yangsan and Ulleung fault zones indicate spatial partitioning of crustal deformation by NNW–SSE to NNE–SSW striking reverse faults and NNE–SSW striking strike-slip faults, supporting a strike-slip partitioned transpression model. The instantaneous and finite neotectonic strains, estimated from the focal mechanism and Quaternary outcrop data, respectively, show discrepancies in their axes, which can be attributed to the switching between extensional and intermediate axes of finite strain during the accumulation of wrench-dominated transpression. Notably, some major faults, including the Yangsan and Ulsan fault zones, are relatively misoriented to slip under the current stress condition but, paradoxically, have more (paleo-)seismic records indicating their role in accommodating the neotectonic transpressional strain. We propose that fluids, heat flow, and lithospheric structure are potential factors affecting the reactivation of the relatively misoriented major faults. Our findings provide insights into the accommodation pattern of strain associated with the neotectonic crustal extrusion in an intraplate region of the eastern Eurasian Plate in response to the collision of the Indian Plate and the subduction of the Pacific/Philippine Sea Plates.     

钨在矿物/熔体和溶液/熔体中的分配行为及其对成矿作用的影响

总结了钨(W)在地球不同圈层、不同相以及不同集合体之间的分配行为,并据此来探讨与花岗岩有关的热液型钨矿床的某些成因机制,并将W矿化所需的较高的浓集系数归因于这一系列不均匀分配行为的累积。同时强调了W在溶液/熔体体系,尤其是富F体系中的分配行为是理解其成矿机理的关键。热液中W主要以钨酸(根)和碱性钨酸盐离子存在,后因流经理化条件(温度、盐度、p H值)骤变而沉淀成矿。