浅析张集矿立井地面预注浆堵水效果

介绍了张集矿立井基岩段水文地质和基岩地面预注浆的有关情况。根据井简实测资料,分析基岩裂隙的发育规律、裂隙层界面的浆波充填情况、实际浆液有效扩散半径及堵水效果。认为：立井基岩地面预注浆,不仅能成功地起到堵水的自的．从而缩短工期、降低造价、提高质量,而且还有利于井筒安全揭穿突出谋层,达到安全施工。     

大直径环式组合潜孔锤及钻进工艺研究

论述了大直径嵌岩桩孔钻进的现状、发展趋势,阐述了大直径环式组合潜孔锤的工作原理、结构设计、钻进工艺方法,对设计加工的HC-15型环式组合潜孔锤钻具进行了室内模拟试验,并对试验结果进行分析总结.     

微波等离子体炬原子发射光谱法测定铁和铝的研究

研究了低功率微波等离子体炬原子发射光谱法（ＭＰＴ－ＡＥＳ）对Ｆｅ，Ａｌ的测定。样品经气动雾化后，分别以流动注射与连续式两种方式引入ＭＰＴ。考察了用这两种进样方式时ＭＰＴ－ＡＥＳ的分析性能，证明低功率ＭＰＴ－ＡＥＳ具有良好的分析特性。     

A new look at pulsar statistics — Birthrate and evidence for injection

We make a statistical analysis of the periodsP and period-derivativesP of pulsars using a model independent theory of pulsar flow in theP-P diagram. Using the available sample ofP andP values, we estimate the current of pulsars flowing unidirectionally along theP-axis, which is related to the pulsar birthrate. Because of radio luminosity selection effects, the observed pulsar sample is biased towards lowP and highP. We allow for this by weighting each pulsar by a suitable scale factor. We obtain the number of pulsars in our galaxy to be 6.05_−2.80 ^+3.32 × 10⁵ and the birthrate to be 0.048_−0.011 ^+0.014 pulsars yr⁻¹ galaxy⁻¹. The quoted errors refer to 95 per cent confidence limits corresponding to fluctuations arising from sampling, but make no allowance for other systematic and random errors which could be substantial. The birthrate estimated here is consistent with the supernova rate. We further conclude that a large majority of pulsars make their first appearance at periods greater than 0.5 s. This ‘injection’, which runs counter to present thinking, is probably connected with the physics of pulsar radio emission. Using a variant of our theory, where we compute the current as a function of pulsar ‘age’ (1/2P/P), we find support for the dipole braking model of pulsar evolution upto 6 × 10⁶ yr of age. We estimate the mean pulsar braking index to be 3.7_−0.8 ^+0.8.     

Orbit injection error analysis for the Lageos III mission

An analysis is presented of the orbital injection errors for the Lageos III satellite mission. Several methods are introduced for the solution of the Inverse Problem in the Theory of Errors. The novelty of the present approach consists in the use of the full geopotential covariance matrix in the error propagation equations. The GEM-T1 covariance matrix is used. It is found that by properly accounting for the correlation among the even zonal harmonic coefficients the acceptable error bounds increase by an order of magnitude with respect to the case when only the variances are used. The most stringent constraint, even when using the full covariance, is on inclination, whose nominal value must be realized within approximately 0.1° for the recovery of the Lense-Thirring precession to be successful at the 3% level (accounting only for injection errors). The associated tolerance in the semimajor axis is about 30 km while that in eccentricity is approximately 0.2. However, if the errors in semimajor axis and eccentricity can be kept to the routinely achievable levels respectively of 10 km and 0.004, then the tolerance in inclination can be relaxed to 0.2°.     

聚合物驱组合段塞分注实验研究

萨尔图油田南二区东部140号断层以东地区葡11—4油层,以多段多韵律和正韵律沉积为主,平均孔隙度30．0％,平均空气渗透率1980×10^-3μm2。水驱结束时该油层平均含水92％,采出程度39．5％。计划对该区块实施聚合物驱开采。以往经验认为,组合段塞调整注聚技术能够有效改善流度控制作用。然而对组合注入情况下如何进一步提高驱油效果、注入井分注时机、层段注入强度对开发效果有何影响却很少探讨。通过室内驱油实验,在聚驱的组合段塞注入不同时机（水驱空白阶段、含水下降阶段、含水稳定阶段、含水回升阶段）下调整注入强度实施分注以及在含水回升分注基础上进一步调整注入强度,同时对比不分注实验,评价各方案驱油效果。实验表明：不实施分注时聚驱采收率在水驱基础上提高了19．07个百分点,而组合段塞注入时实施分注均能够在不分注基础上进一步提高驱油效果;空白水驱时实施分注采收率提高幅度最大,为26．55个百分点;随着分注时机的滞后采收率提高幅度增加值依次递减,分注时机越早越好。     

超长定向钻注装备关键技术分析及发展趋势

定向钻技术起源于石油钻井工业,经多年发展已拓展至隧道工程地质勘察及灾害处置、煤矿底板含水层改造、蓄能电站抽水通道施工、市政管道铺设等多个领域。地面注浆技术结合定向钻长距离精准穿越的优势,可实现地下工程不良地质高效预加固与灾害安全处置,具有广阔的应用前景。系统综述了定向钻注装备技术的发展历程、研究现状和待突破关键技术。首先,介绍了定向钻与地面注浆技术的发展历程;其次从重大科研项目、学术论文、授权专利以及工程实践等方面进行了分析与总结。结果表明：我国现阶段定向钻注技术总体已达到自主化、实用化的国际先进水平,但在千米级长距离快速钻进、复杂地质条件精准导向、地下工程精准注浆处置等核心技术方面仍存在“卡脖子”难题。面向战略性重大工程建设需求,提出了超长距离定向钻注一体化装备“预报、钻进、注浆、检测”四大功能模块,围绕随钻感知预报、快速钻进与卡钻预测、精准导向技术、远距离凝胶可控注浆材料、稳压控制分段注浆工艺、随钻检测系统六方面,开展了分析与讨论,可为我国定向钻注一体化装备技术发展和地下工程灾害防控提供参考。     

南海神狐海域天然气水合物注热降压开采数值模拟研究

针对南海神狐海域天然气水合物成藏条件,利用pT+H软件和水平井技术对天然气水合物的注热和注热降压开采效果进行了模拟分析。重点讨论了注入热水温度为30、60、90℃时水合物饱和度以及CH4气体饱和度、CH4产气率、累积CH4产气量和产水量的变化规律,发现两种开采模式下水合物低饱和度分布范围随时间增长和温度升高而增大;CH4产气率在开采10 d内升高较快,之后逐渐减小。模拟结果表明:注热降压开采模式比单纯注热模式的效果有较大改善,而且温度对于提高CH4产气量效果不明显,但因为天然气水合物藏的低渗透性,神狐海域的天然气水合物的CH4产气量不大。研究结果可为南海神狐海域和类似地区天然气水合物开采提供参考。     

FEM for stability analysis against overturning of portal water injection sheet pile

Portal water injection sheet pile （PWISP）, as a retaining wall, appeared in seashore engineering in 2000. Although there have been many systematic methods addressing the issue, there are very few focusing on the new structure because of the difficulties in defining the earth pressure between the two piles. A new method is proposed in this paper to obtain the earth pressure between the PWISPs. Stability analysis against overturning follows as a consequence. Using Finite Element Analysis （FEA） software ANSYS, both the nonlinear characteristics of the soil and those of the contact elements are taken into account to obtain the earth pressure distribution on the contact surface. Based on the results of the FEA, Rankin＇s theory and the slip plane theory, the formula of the earth pressure on the inner surfaces between the piles is given. Assuming the PWISP as the analysis object and the earth pressure as an outside force acting upon it, the equation of stability against overturning of the PWISP is presented. Finally, some parameters are discussed about the stability of the PWISP against overturning, such as the embedded depth of the front pile, the distance between the two rows of piles, the internal friction angle and the cohesion of the earth. The results show that the increase of the cohesion and the internal friction angle will decrease the distance and the embedded depth, and therefore enhance the stability against overturning. Specifically, when the distance is 1/3-2/3 of the maximal excavation depth, the two rows of piles give the best performance in stability.     

Determination of Zirconium, Niobium, Hafnium and Tantalum at ng g-1 Levels in Geological Materials by Direct Nebulisation of Sample HF Solution into FI-ICP-MS

We have developed a rapid and accurate method to determine Zr, Nb, Hf and Ta (denoted as HFSE) in geological samples by inductively coupled plasma-mass spectrometry fitted with a flow injection system (FI-ICP-MS). The method involves sample decomposition by HF followed by HF dissolution of HFSE coprecipitated with insoluble M and Ca fluoride residues formed during the initial HF attack. This HF solution was directly nebulized into an ICP mass spectrometer. An external calibration curve method and an isotope dilution method (ID) were applied for the determination of Nb and Ta, and of Zr and Hf, respectively. Recovery yields of HFSE were > 96% for peridotite, basalt and andesite compositions, apart from Zr and Hf for peridotite (> 85%). No matrix effects for either signal intensities of HFSE or isotope ratios of Zr and Hf were observed in basalt, andesite and peridotite solutions down to a dilution factor of 100. Detection limits in silicate rocks were 40, 2, 1 and 0.1 ng g-1 for Zr, Nb, Hf and Ta, respectively. This technique required only 0.1 ml of sample solution, and thus is suitable for analysing small and/or precious samples such as meteorites, mantle peridotites and their mineral separates. We also present newly determined data for the Zr, Nb, Hf and Ta concentrations in USGS silicate reference materials DTS-1, PCC-1, BCR-1, BHVO-1 and AGV-1, GSJ reference materials JB-1, -2, -3, JA-1, -2 and -3, and the Smithsonian reference Allende powder.