聚合物驱组合段塞分注实验研究

萨尔图油田南二区东部140号断层以东地区葡11—4油层,以多段多韵律和正韵律沉积为主,平均孔隙度30．0％,平均空气渗透率1980×10^-3μm2。水驱结束时该油层平均含水92％,采出程度39．5％。计划对该区块实施聚合物驱开采。以往经验认为,组合段塞调整注聚技术能够有效改善流度控制作用。然而对组合注入情况下如何进一步提高驱油效果、注入井分注时机、层段注入强度对开发效果有何影响却很少探讨。通过室内驱油实验,在聚驱的组合段塞注入不同时机（水驱空白阶段、含水下降阶段、含水稳定阶段、含水回升阶段）下调整注入强度实施分注以及在含水回升分注基础上进一步调整注入强度,同时对比不分注实验,评价各方案驱油效果。实验表明：不实施分注时聚驱采收率在水驱基础上提高了19．07个百分点,而组合段塞注入时实施分注均能够在不分注基础上进一步提高驱油效果;空白水驱时实施分注采收率提高幅度最大,为26．55个百分点;随着分注时机的滞后采收率提高幅度增加值依次递减,分注时机越早越好。     

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

微波等离子体炬原子发射光谱法测定铁和铝的研究

研究了低功率微波等离子体炬原子发射光谱法（ＭＰＴ－ＡＥＳ）对Ｆｅ，Ａｌ的测定。样品经气动雾化后，分别以流动注射与连续式两种方式引入ＭＰＴ。考察了用这两种进样方式时ＭＰＴ－ＡＥＳ的分析性能，证明低功率ＭＰＴ－ＡＥＳ具有良好的分析特性。     

秦岭泥盆系层控铅锌矿床成因模式探讨

在论述秦岭泥盆系层控铅锌矿床的黄铁矿微量元素,硫、铅、氢、氧同位素,矿物气液包裹体均一温度及成分.区域地层元素丰度等方面特征的基础上,提出了该类型属海底含矿热泉溢出沉积和隐伏含矿热泉贯入沉淀的成因模式.     

二红洼镁铁-超镁铁杂岩体特征及成因

新疆哈密二红洼镁铁-超镁铁杂岩体地表分南北两个岩体,深部可能连为一体,可划分为两个侵入期、四个岩相.第一侵入期构成岩体的主体部分,分异良好,由重力结晶分异形成自橄揽岩相、橄榄辉长岩相向含石英苏长辉长岩相的分异趋势,基性程度依次降低.岩浆多次贯入使得纵向上橄榄岩相和橄榄辉长岩相重复出现.第二侵入期辉长苏长岩相分异程度低,岩性稳定,为岩浆快速冷凝的产物.岩浆属于拉斑玄武岩系列,发生过金属硫化物熔离,有利于铜镍硫化物成矿.     

Can injection tests reveal the potential for fault movements?

The role of fluids in faulting mechanism and triggering earthquakes is widely accepted. The effective-stress law is the basis for the postulated theories. Using a generalized version of this law, applicable to both continuum and discontinuities, hydromechanical behaviour of a horizontal fracture in a hypothetical fluid-injection problem is investigated. In this problem the increasing intake flow rates, unpredictable by the traditional fluid-flow solutions, brings out another significant aspect of the role of the fluid pressure in rocks. By reducing the magnitude of the compressive effective stresses the fluid pressure causes elastic recovery in fractures. Simple rheologic models are used to demonstrate this fact. Such effects may lead to permeability increases in the rock mass, depending on the magnitude of the fluid pressure. Such variations in permeability, however, are governed by the path dependency of the fracture-deformation response. Therefore, a significant increase in permeability is an indication of comparability of the state of stress and the applied fluid pressure.This index may reveal the potential of hydroactivation of faults, as may arise in the regions of dam reservoirs, underground waste injections, and known faults, for certain ranges of working pressures relevant to each of the above-cited situations. Fluid-injection tests under constant working pressures are suggested as a means revealing the likelihood of movement on the faults.     

流动注射分光光度法同时测定水中挥发酚及氰化物

在单针进样器的基础上，增加一个三通流路同时进样，在线消解-流动注射分光光度法测定水中挥发酚及氰化物。实验结果表明，挥发酚浓度在0mg/L～0．2mg／L、氰化物浓度在0mg/L～0．5mg／L范围内具有良好的线性关系。通过在线气体扩散分离技术，提高了分析速度，每小时可完成12个～15个样品的分析。方法的相对标准偏差〈5％，回收率在90．4％～108．5％之间。     

周口电信枢纽楼基坑降水设计方案技术经济分析

通过分析两种不同的基坑降水设计方案，阐述了降水技术要求，并介绍周边建筑物不均匀沉降的防治措施。     

反相流动注射催化光度法测定废水中的亚硝酸根

采用反相流动注射技术与催化光度法相结合，用微机化流动注射分析仪准确控制反应时间，优化了实验条件，克服了催化光度法反应时间难以控制引起的方法精密度、准确度不高的弱点，拟定了测定痕量亚硝酸根的流动注射催化光度方法。分析速度第小时20次，NO2^- 质量浓度在0．00－2．00mg/L，回归方程斜率为0．155。方法直接测定电厂测水中NO2^-的结果与Griess法相符合，RSD＜5．0％（n=5）。