频率可切换的矩形缝隙环频率选择表面

基于金属屏上周期排列的缝隙单元结构的通带特性,提出矩形缝隙环(Rectangular Slot Ring,RSR)加载短路线的单元结构实现频率可调频率选择表面(Frequency Selective Surface,FSS).谐振缝隙单元开路与短路时相对应的谐振频率分别为13 GHz和15 GHz.RSR-FSS选用Rogers RO4003介质作为基板,按照12×12的方阵进行周期排列,利用全波电磁仿真软件CST对其进行了电磁传输特性仿真.最终,通过实验验证了该频率选择表面在Ku波段通过连通和断开短路线可以进行频率的切换.     

Shell‐shape and morphometric variability in Mytilus galloprovincialis from micro‐tidal environments: responses to different hydrodynamic drivers

Tidal conditions differently influence inter‐tidal organisms in terms of general physiological and metabolic responses. In this study we investigated the morphological response in shells of Mytilus galloprovincialis native to different micro‐tidal coastal environments in the Northern Adriatic Sea. Our purpose was to highlight the ecophenotypic variability across tidal levels and to elucidate how tidal currents and waves produced by anthropogenic activities may play a part in modulating shell morphology. Three sampling sites were selected: an open‐sea area 15 km off‐shore and two sites within the lagoon of Venice, the first near one of its three inlets, and the other one in the proximity of Venice city centre. At each sampling site, organisms were seasonally collected at different depths within their vertical zonation, either in the inter‐tidal zone – i.e. at both the highest and lowest tide zonation limits, and subtidally. The mussel shells were analysed by investigation of their morphometric relationships (height/length and width/length ratios) and by elliptic Fourier analysis of the shell contours. Shell thickness and condition index were also evaluated for a better comprehension of energy allocation/partitioning. Estimates based on long‐term measurements, visual observation, wind statistics and wave growth laws allowed an evaluation of the forces acting on shells. At the open‐sea site, the observed phenotypic variability of both shell shape and thickness was clearly related to the tidal vertical zonation. At the two lagoon sites, the currents generated by tidal flow through the inlet and the waves caused by the frequent passage of boats influenced both shell shape and thickness. A trade‐off between protection and growth was apparent along the tide gradient, as emphasized by the differences in the partitioning and allocation of energy between shell and flesh production.     

Experimental study of reflection coefficient and wave forces acting on perforated caisson

The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.     

Inversion of multimode surface wave data: evidence for sub-lithospheric anisotropy

Summary. Multiparameter inversions of multimode dispersion data are performed for two large regions: the Pacific Ocean and North America. Anisotropy is taken into account by considering transversely isotropic structures with a vertical axis of symmetry. Two fundamental questions are studied in detail: (1) how to make the inverted models consistent when using different sets of parameters, (2) what is the significance of transversely isotropic inversion for the actual Earth's structure? It is proved that full consistency of the inverted models can be achieved by properly taking into account some a priori informations on the model and it is shown that the use of transversely isotropic models with vertical axis of symmetry does not cause severe limitations when interpreting the data. The models we have obtained are discussed in the light of these investigations. Considering an olivine-rich upper mantle, we make a tentative interpretation of these models in terms of preferred orientation of the a -axis of the crystals in one fixed horizontal direction.     

武汉地区中尺度电离层声重波扰动的变化特性

利用武汉电离层观象台高频多普勒台阵的覆盖太阳活动高、低年份,长达５年的连续观测数据,采用小波分析等方法估算电离层声重波扰动（ＴＩＤ）的传播参量,通过这些参量对武汉地区电离层扰动形态和变化规律进行了系统分析研究．结果表明,观测到的中尺度电离层声重波扰动（ＭＳＴＩＤ）存在二个显著季变化,在传播速度和周期上有明显差异的优势传播方向：一个指向东北方,传播的方位角主要分布在３０°─７０°之间（０°为正北,以顺时针方向表示传播方位角）,它在夏季出现率最大,冬季基本消失;另一个优势方向指向正南,方位角主要分布在１５０°─２２０°范围,主要出现在冬季．文中还给出了ＭＳＴＩＤ的年、日变化,并进一步探讨了其变化特性的可能形成机理．     

垂荡式波浪能装置运动模型数值分析

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。     

地球-电离层空腔舒曼共振日变化特征分析

全球雷电活动在地球-电离层空腔中产生的极低频(ELF)信号干涉叠加,在一系列固定频率上产生舒曼共振(SR)。利用2012年5月以色列Mitzpe-Roman(MR)站ELF水平磁场资料,采用频谱变换、时间平均、分析了实测SR日变化信号的时域和频域特征。同时基于全球ELF传播模式,利用OTD/LIS雷电卫星资料模拟了5~30 Hz磁场功率谱日变化情况。结果表明:时域背景信号幅值的均值和偏差满足正态分布的期望和标准差;水平磁场前三阶SR谐振频率非常稳定,月平均下的谐振频率日变化相对8、14、20 Hz理论值的偏移量分别不超过0.3 Hz、0.55 Hz和0.6 Hz。东南亚和美洲地区雷电活动主要响应于南北磁场分量第一阶SR的07—09时和19—22时时段内。而东西磁场分量前三阶SR在12—15时时段内都对非洲地区雷电活动有指示作用。磁场功率谱日变化模拟结果与实测基本一致,表明利用单站正交磁天线的不同阶SR信号能够指示全球不同"热斑"区域的雷电活动。     

臭氧和平流层动力学的相互作用

讨论了给定的南极春季臭氧洞(取自1979—1985年臭氧减少的观测结果)对二维平流层—对流层模式中温度和环流的影响。11月份,南极上空约17km处,温度最多可降低6℃。这种温度变化引起的平均经向环流对臭氧洞起填塞作用,不过,这种影响很小,每年仅产生14DU的变化。观测事实表明,近年来10月份,南半球波活动减弱。为此,我们作了南半球波作用全年都减少一半,并考虑了臭氧洞的数值试验。结果表明,臭氧柱在11月份76°S减少了44DU,在赤道却增加了12DU。     

基于时频域极化滤波的勒夫型槽波提取

矿井槽波地震勘探数据中,含有多种类型地震波,包括线性极化的纵波、横波、勒夫型槽波和椭圆极化的瑞利型槽波。由于槽波频散现象严重,不同类型槽波互相重叠,在地震记录上难以区分,合理地进行波场分离是槽波数据处理的重要环节。根据不同类型槽波振动极化特征,提出基于S变换的时频域自适应协方差矩阵极化滤波方法;在时频域中,针对槽波水平双分量信号建立自适应协方差矩阵;利用矩阵对应特征值和特征向量,计算椭圆率和方位角参数来描述槽波极化振动特征;依据极化参数建立极化滤波函数,对槽波地震信号进行波场分离。经过理论合成信号和实际数据测试表明,该方法可以有效地从槽波地震记录中提取出勒夫型槽波,避免其它类型地震波在槽波数据处理过程中产生的干扰,为槽波地震勘探数据处理提供新的技术手段。     

不同刚度植物杆群对规则波传播及紊动特性影响研究

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。