基于树结构的数字遥感图像存储方法与应用

数字遥感图像一般是采用栅格结构来存储。图像中地物的结构特征是隐含其中的。该文从图像识别角度，重点研究了基于树结构的数字遥感图像存储方法。这种方法与遥感中常用的四又树等存储方法不同，它注重图像中地物本身的结构特征。通过树结构使像元按地物目标形成一个个的组合体。该文以机场跑道识别为例，介绍了基于树结构的数字遥感图像存储方法的应用以及将图像变为树的算法。     

合肥市耕地和粮食可持续发展研究

收集1980～1999年合肥市耕地、人口、粮食等资料，定量分析在城市化快速发展下耕地的数量、质量变化和耕地减少的形式以及人口、粮食的变化，并用回归法分析它们的变化趋势。研究认为，在2005，2010年合肥市食物保障能力分别为97％和95％，对粮食生产与其影响因素进行了灰色关联分析，提出提高粮食产量的对策和实现途径。     

台湾西南部泥岩土地利用型态与环境劣化趋势之分析

台湾泥岩恶地因其特殊之土壤理化性质及区域微气候的相互恶性循环，衍生生态环境等问题。在以往之35年，裸化面积从1967年的2532hm^2，至2001年11月已扩大为15539hm^2。其表土大量流失、崩塌、河川含砂量激增、植被退化与微气候变异等破坏，更显示泥岩之环境劣化问题。以SPOT卫星影像判识泥岩裸露面积，探讨不同时期之地景变异，并应用地景生态理论量化泥岩地表不同土地利用之空间结构变化，分析地景结构变迁之生态内涵与生态指标意义。因子分析结果其主要变异为多样性因子与形状破碎型因子所影响，而应用马可夫链模式计算出不同时期之土地利用变迁内涵，此结果搭配指标分析可解释泥岩裸露面积与竹林面积皆持续扩大，乃由人为土地利用之活动及植被变迁所引起。     

图像处理技术在地质灾害监测中的应用

三维激光微位移监测技术是一种对地质灾害进行长期监测的新方法。该技术用激光作为光源，用CCD摄像器作为镜头，通过图象采集卡把视频信号采入计算机中，用与该仪器配套的专门软件对采集到的光斑图像进行处理，计算出光斑的三维中心坐标值，把该值和原点坐标值进行比较，就可以算出灾害体滑动的距离。该系统可以对灾害体进行长期、非接触监测，监测时间、监测频率可以任意设定。文章概括介绍该监测的原理，各个组成部分，重点介绍软件部分，即采集的视频信号进入计算机后的图像处理过程和数据库结构。该监测系统已在三块地区试运行了3个月，效果较好。     

新疆乌鲁木齐地区多年水氡观测资料的统计与分析

通过对乌鲁木齐地区1980—7．001年的水氡观测资料进行全时域扫描分析，以乌鲁木齐为中心300km范围内Ms≥5．0的地震事件为研究对象，挑选出观测资料中异常时段，用地震预报效能评价评分的方法对水氡观测资料预报地震的能力进行评价。     

大型双槽渡槽地震反应分析

为了得到比较精确的大型双槽渡槽结构的地震反应，根据渡槽结构复杂、影响动力因素较多等特点，采用8结点空间块体单元对渡槽槽身和槽墩进行有限元离散，分别用耦合自由度和多个弹簧单元分别模拟渡槽槽身横向拉杆、加劲肋和盆式橡胶支座，建立了大型双槽渡槽结构地层反应分析的有限元模型，计算了南水北调水利工程中的双洎河大型双槽渡槽的振动特性，并分别用反应谱法和时程分析法对该渡槽进行了地震反应分析，计算结果可为该渡槽的抗震设计提供参考。     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

遗传算法与单纯形法组合的影像纹理分类方法

提出遗传算法(简称GA)与单纯形法组合的影像纹理分类方法(简称GASPX)。单纯形法是一种局部搜索方法，它通过反射，扩张，收缩操作，求得新的单纯形点，组成新单纯形，新单纯形比前一个单纯形更接近局部最优解。这种寻优方法收敛速度快，它与GA组合起来可以改善单独使用GA收敛速度慢的缺陷。由于在组合算法中是多个单纯形的局部区域的并行搜索，避免GA优化过程中过早收敛于局部最优解的现象出现。通过5种不同类别航空影像纹理识别的试验，并与GA的结果作对比，结果表明GASPX法优于GA法。